430

430 Backhoe Loader

430 Backhoe Loader

DESCRIPTION

The Cat® 430 Backhoe Loader delivers exceptional performance, increased fuel efficiency, superior hydraulic system, versatility and an updated operator station.

Ergonomic Operator Station

Ample legroom inside the cab makes rotating the seat simple. The air suspension seat provides comfort to the operator while roading. New backhoe control pods allow for unlimited adjustability.

The 430 Backhoe Loader.

Load Sensing Hydraulics

The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.

Machine Performance

The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.

Machine Versatility

The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.

Cat Attachments

A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.

Powershift Transmission

A Four Speed Powershift Transmission is standard to make shifting gears smooth and as simple as twisting the Powershuttle Lever.

Spring Applied Hydraulically Released (SAHR) Parking Brake

The SAHR Parking Brake is activated at the push of a button and automatically engages when the machine is powered down.

Sustainability

  • The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to:
    • 20% biodiesel FAME (fatty acid methyl ester)
    • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels
    Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.

  • The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent of 2.3 metric tonnes (2.5 tons).

  • Operator Sound Pressure Level (ISO 6396:2008) – 76 dB(A)*
  • Exterior Sound Power Level (ISO 6395:2008) – 101 dB(A)
  • * Measurements were conducted with properly installed and maintained cab doors and windows closed.

  • Caterpillar factory fills with ethylene glycol coolants. Cat Diesel Engine Antifreeze/Coolant (DEAC) and Cat Extended Life Coolant (ELC) can be recycled. Consult your Cat dealer for more information.
  • Cat Bio HYDO™ Advanced is an EU Ecolabel approved biodegradable hydraulic oil.
  • Additional fluids are likely to be present, please consult the Operations and Maintenance Manual or the Application and Installation guide for complete fluid recommendations and maintenance intervals.

  • The following features and technology may contribute to fuel savings and/or carbon reduction. Features may vary. Consult your Cat dealer for details.
    – Save fuel and reduce your greenhouse gas emissions with efficiency features such as operator control modes selectable through the display and with fuel management modes.
    – Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
    – Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • STANDARD EQUIPMENT
    • Adjustable auxiliary controls, backhoe loader
    • Air cleaner
    • Alarm, back-up
    • Audible system fault alarm
    • Automatic Engine Speed Control (AESC)
    • Battery, maintenance-free, 850 CCA
    • Battery disconnect switch
    • Boom transport lock
    • Brace, lift cylinder
    • Brake, parking, Spring Applied Hydraulically Released (SAHR)
    • Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
    • Bucket level indicator
    • Canopy, ROPS/FOPS
    • Cat cushion swing system
    • Coat restraint
    • Coolant/antifreeze, extended life
    • Dome light (cab only)
    • Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
    • Differential lock, loader joystick
    • Drink holders, two
    • Engine, Cat C3.6 ACERT (Direct Injection Turbocharged), meets Tier 4 Final/Stage V emission standards, Selective Catalytic Reduction, Diesel Oxidation Catalyst (DOC)
    • Engine enclosure, sound suppression, removable side panels
    • Face seals, O-ring
    • Fan, suction and guard
    • Fast reversing shuttle, all gears
    • Fenders, rear
    • Filters, spin-on: fuel, engine oil, transmission oil, water separator
    • Filters, bowl and cartridge: hydraulic fluid
    • Flashing hazards/signal lights
    • Floor mat
    • Fuel tank, fully enclosed
    • Four wheel drive
    • Four wheel drive shaft guard
    • Fully hinged front grill for cooling package cleaning access
    • Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
    • Ground level fuel fill and DEF fill
    • Halogen lights, working (2 front, 2 rear)
    • High ambient cooling package
    • Hood lock, inside cab
    • Hydraulic hose, XT™
    • Hydraulic oil cooler
    • Hydraulic oil level sight gauge
    • Hydraulic valves, loader 2 function
    • Hydraulic valves, backhoe 4 function
    • Hydraulics, load sensing with variable displacement piston pump
    • Indicator lights: wait to start, water in fuel, engine warning, warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature: LCD warnings: engine oil pressure, machine locked, service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
    • Instrument panel lights
    • Joystick controls: pilot operated, excavator-style with pattern changer
    • Key start/stop system
    • LCD operator display with soft key controls: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
    • Loader, self-leveling, return-to-dig and transmission disconnect switch
    • Loader, single tilt
    • Mirror, interior, rearview
    • One-touch low idle
    • Open circuit breather
    • Pattern changer, in cab
    • Power receptacle, 5 volt USB, 1 internal
    • Power receptacle, 12 volt, 2 internal, 1 external
    • Power steering, hydrostatic
    • Product Link™, satellite, network manager
    • Product Link, cellular, network manager
    • Seat belt, retractable, 51 mm (2 in)
    • Socket, two roof
    • Stabilizer shoes, street
    • Steering knob
    • Seat, air suspension, vinyl cover, with armrest
    • Stabilizers, EH Control, Auto-UP
    • Starting system, glow plugs
    • Steering column, tilting, telescopic
    • Storage compartment, lockable
    • Storage tray
    • Stop and tail lights
    • Swing transport lock
    • Tires
    • Toolbox, external, lockable
    • Torque converter
    • Throttle, hand and foot, electronic
    • Transmission, 4 speed, powershift
    • Transmission neutralizer switch
    • Transport tie-downs
    • Vandalism locks, four
    • Warning horn, electric

Optional Equipment

  • OPTIONAL EQUIPMENT
    • Auxiliary hydraulics, loader, adjustable flow
    • Auxiliary hydraulics, rear, adjustable flow
    • Battery, additional, 850 CCA
    • Cab, deluxe
    • Cold weather fuel (–30° C/–22° F)
    • Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
    • Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
    • Fenders, front with integral steps
    • Guard, boom protection plate
    • Guard, stabilizer, rock
    • Hydraulic valves, loader with auxiliary thumb control (3rd valve for MP or Quick Coupler)
    • Hydraulic valves, backhoe (5th and 6th function)
    • Hydraulic lines, combined function auxiliary
    • LED lights, working (2 front, 2 rear)
    • Quick Coupler, hydraulic, dual lock
    • Quick Coupler, manual, dual lock
    • Quick Coupler, manual, pin lock
    • Radio and CD player, Bluetooth®
    • Ride Control
    • Rotating beacon, magnetic mount
    • Seat, air suspension, fabric with armrest
    • Seat, air suspension, fabric with armrest, heated
    • Seat belt, retractable, 75 mm (3 in)
    • Security system, Bluetooth
    • Security system, operator display
    • Side mirrors, cab, external
    • Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
    • Stabilizer pads, reversible
    • Stick, extendible
    • Transmission, AutoShift with lock-up torque converter, 6 speed
    • Vandalism protection, gauge cover
    • Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.

Specs

Overview

Long Name:
430 Backhoe Loader
Name:
430
Brand:
Caterpillar
Status:
Current

Engine

Net Power - SAE J1349
107 hp / 80 kW
Displacement
220 in³ / 3.6 l
Net Torque Rise - 1,400 rpm - SAE J1349
358 ft-lb / 486 N·m
Power Rating Conditions - No De-Rating Required Up To
10000 ft / 3048 m
Net Power Rating at 2,200 rpm - ISO 9249
107 hp / 80 kW
Net Power Rating at 2,200 rpm - SAE J1349
107 hp / 80 kW
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Net Torque Rise - 1,400 rpm - SAE J1349
40%
Ratings at 2,200 rpm - Gross Power ISO 14396
115 hp / 86 kW
Ratings at 2,200 rpm - Gross Power SAE J1995
118 hp / 88 kW
Engine Model
C3.6 86 kW (115 hp) Electronic Turbo Intercooled
Dimensions - Stroke
4.72 in / 120 mm
Net Peak Power Rating @ 2,200 rpm - SAE J1349
107 hp / 80 kW
Dimensions - Bore
3.86 in / 98 mm
Net Peak Power Rating @ 2,200 rpm - ISO 9249
107 hp / 80 kW

Weights

Operating Weight - Maximum
24251 lb / 11000 kg
Cab - ROPS/FOPS
320 lb / 145 kg
Ride Control
33 lb / 15 kg
Air Conditioning
99 lb / 45 kg
Note (2)
**Minimum weight configuration is the same as configuration above, however, excludes counterweight, hoe bucket, and operator.
Operating Weight - Maximum - ROPS Capacity
24251 lb / 11000 kg
MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks
1642 lb / 745 kg
Operating Weight - Estimated*
18051 lb / 8188 kg
MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks
2017 lb / 915 kg
Note (1)
*Machine configuration: standard stick hoe, OROPS canopy, AWD powershift shift transmission, 0.96 m3 (1.25 yd3) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 460 kg (1,014 lb) counterweight, 80 kg (176 lb) operator, full fuel tank.
All-Wheel Drive
STD
Operating Weight (minimum)**
16590 lb / 7525 kg
Loader QC
540 lb / 245 kg
Auto-Shift Transmission
STD
Counterweights, base - Maximum
1014 lb / 460 kg
Extendible Stick (excludes ft. counterweight)
655 lb / 297 kg
Counterweights, base - Stackable, one
529 lb / 240 kg
Counterweights, base
256 lb / 115 kg

Backhoe

Dig Depth - Standard
15.1 ft / 4612 mm

Transmission

Power-Shift Transmission with LTC - Optional - Forward - 5th LTC
18 mile/h / 29 km/h
Power Shift Transmission - Standard - Reverse - 3rd
17 mile/h / 27 km/h
Power-Shift Transmission with LTC - Optional - Reverse - 1st
3.7 mile/h / 5.9 km/h
Power-Shift Transmission with LTC - Optional - Forward - 6th
26 mile/h / 41 km/h
Power-Shift Transmission with LTC - Optional - Forward - 6th LTC*
25 mile/h / 40 km/h
Power Shift Transmission - Standard - Reverse - 1st
3.7 mile/h / 5.9 km/h
Power Shift Transmission - Standard - Forward - 4th
26 mile/h / 41 km/h
Power Shift Transmission - Standard - Reverse - 2nd
7.7 mile/h / 12.4 km/h
Power-Shift Transmission - Optional - Reverse - 3rd
17 mile/h / 27 km/h
Power-Shift Transmission with LTC - Optional - Forward - 2nd
5.9 mile/h / 9.5 km/h
Power Shift Transmission - Standard - Forward - 1st
3.7 mile/h / 5.9 km/h
Power Shift Transmission - Standard - Forward - 3rd
12 mile/h / 20 km/h
Power-Shift Transmission with LTC - Optional - Forward - 1st
3.7 mile/h / 5.9 km/h
Power Shift Transmission - Standard - Forward - 2nd
5.9 mile/h / 9.5 km/h
Power-Shift Transmission - Optional - Reverse - 2nd
7.7 mile/h / 12 km/h
Power-Shift Transmission - Optional - Forward - 4th
12 mile/h / 20 km/h
Power-Shift Transmission - Optional - Forward - 5th
17 mile/h / 27 km/h
Power-Shift Transmission with LTC - Optional - Forward - 3rd
8 mile/h / 12 km/h
Power-Shift Transmission with LTC - Optional - Forward - 5th
17 mile/h / 27 km/h
Power-Shift Transmission with LTC - Optional - Reverse - 2nd
7.7 mile/h / 12 km/h
Power-Shift Transmission - Optional - Reverse - 1st
3.7 mile/h / 5.9 km/h
Power-Shift Transmission - Optional - Forward - 2nd
5.9 mile/h / 9.5 km/h
Power-Shift Transmission - Optional - Forward -1st
3.7 mile/h / 5.9 km/h
Power-Shift Transmission with LTC - Optional - Reverse - 3rd
17 mile/h / 27 km/h
Power-Shift Transmission with LTC - Optional - Forward - 4th
12 mile/h / 20 km/h
Power-Shift Transmission - Optional - Forward - 6th
26 mile/h / 41 km/h
Power-Shift Transmission - Optional - Forward - 3rd
8 mile/h / 12 km/h
Note (1)
*Travel speeds of backhoe loader at full throttle, when equipped with 500/70-24 rear tires.
Note (2)
**Limited by engine speed to 40 km/h (25 mph).

Axle Ratings

Front Axle, AWD - Static
51808 lb / 23500 kg
Rear Axle - Dynamic
22046 lb / 10000 kg
Front Axle, AWD - Dynamic
19841 lb / 9000 kg
Rear Axle - Static
58422 lb / 26500 kg

Hydraulic System

Pump Type
Variable-flow, Axial Piston
System Pressure - Backhoe
3626 psi / 25000 kPa
Pump Capacity at 2,200 rpm
49.4 gal/min / 187 l/min
Type
Closed Center
System Pressure - Loader
3626 psi / 25000 kPa

Steering

Bore
2.6 in / 65 mm
Stroke
4.2 in / 106 mm
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
35.25 ft / 10.745 m
Axle Oscillation
11°
Power Steering
Hydrostatic
Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.92 ft / 8.205 m
Rod Diameter
1.6 in / 40 mm
Type
Front Wheel Steering
Cylinder
One Double-Acting

Service Refill Capacities

Diesel Exhaust Fluid (DEF)
5 gal (US) / 19 l
Transmission - Power Shift - AWD
5 gal (US) / 19 l
Front Axle (AWD)
2.9 gal (US) / 11 l
Front Axle (AWD) - Planetaries
0.2 gal (US) / 0.7 l
Transmission - Power Shuttle - AWD
4.8 gal (US) / 18 l
Engine Oil - With Filter
2.4 gal (US) / 9 l
Rear Axle - Planetaries
0.4 gal (US) / 1.7 l
Cooling System with Air Conditioning
4.8 gal (US) / 18 l
Rear Axle
4.2 gal (US) / 16 l
Fuel Tank
42.3 gal (US) / 160 l
Hydraulic System
25.1 gal (US) / 95 l
Hydraulic Tank
11.1 gal (US) / 42 l

Sustainability

Recyclability
92%

SEE HOW 430 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Center-Pivot Backhoe Loaders
430
430 Backhoe Loader
Brand
Caterpillar
Status
Current
Net Power - SAE J1349
107 hp / 80 kW
Displacement
220 in³ / 3.6 l
Net Torque Rise - 1,400 rpm - SAE J1349
40%
Power Rating Conditions - No De-Rating Required Up To
10000 ft / 3048 m
Net Power Rating at 2,200 rpm - ISO 9249
107 hp / 80 kW
Net Power Rating at 2,200 rpm - SAE J1349
107 hp / 80 kW
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Ratings at 2,200 rpm - Gross Power ISO 14396
115 hp / 86 kW
Ratings at 2,200 rpm - Gross Power SAE J1995
118 hp / 88 kW
Engine Model
C3.6 86 kW (115 hp) Electronic Turbo Intercooled
Operating Weight - Maximum
24251 lb / 11000 kg
Cab - ROPS/FOPS
320 lb / 145 kg
Air Conditioning
99 lb / 45 kg
Note (2)
**Limited by engine speed to 40 km/h (25 mph).
Operating Weight - Maximum - ROPS Capacity
24251 lb / 11000 kg
Note (1)
*Travel speeds of backhoe loader at full throttle, when equipped with 500/70-24 rear tires.
Dig Depth - Standard
15.1 ft / 4612 mm
Front Axle, AWD - Static
51808 lb / 23500 kg
Rear Axle - Dynamic
22046 lb / 10000 kg
Front Axle, AWD - Dynamic
19841 lb / 9000 kg
Rear Axle - Static
58422 lb / 26500 kg
Pump Type
Variable-flow, Axial Piston
System Pressure - Backhoe
3626 psi / 25000 kPa
Pump Capacity at 2,200 rpm
49.4 gal/min / 187 l/min
Type
Front Wheel Steering
System Pressure - Loader
3626 psi / 25000 kPa
Bore
2.6 in / 65 mm
Stroke
4.2 in / 106 mm
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
35.25 ft / 10.745 m
Axle Oscillation
11°
Power Steering
Hydrostatic
Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.92 ft / 8.205 m
Rod Diameter
1.6 in / 40 mm
Diesel Exhaust Fluid (DEF)
5 gal (US) / 19 l
Engine Oil - With Filter
2.4 gal (US) / 9 l
Rear Axle - Planetaries
0.4 gal (US) / 1.7 l
Cooling System with Air Conditioning
4.8 gal (US) / 18 l
Rear Axle
4.2 gal (US) / 16 l
Fuel Tank
42.3 gal (US) / 160 l
Hydraulic System
25.1 gal (US) / 95 l
Hydraulic Tank
11.1 gal (US) / 42 l
Center-Pivot Backhoe Loaders
420 XE
420 XE Backhoe Loader
Brand
Caterpillar
Status
Current
Net Power - SAE J1349
92 HP (68 kW) / 103 HP (76 kW)
Displacement
220 in³ / 3.6 l
Net Torque Rise - 1,400 rpm - SAE J1349
322 ft-lb / 436 N·m
Power Rating Conditions - No De-Rating Required Up To
10000 ft / 3048 m
Net Power Rating at 2,200 rpm - ISO 9249
91 hp / 68 kW
Net Power Rating at 2,200 rpm - SAE J1349
92 hp / 68 kW
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Ratings at 2,200 rpm - Gross Power ISO 14396
100 hp / 74 kW
Ratings at 2,200 rpm - Gross Power SAE J1995
102 hp / 76 kW
Engine Model
C3.6 74.5 kW (100 hp) Electronic Turbo Intercooled
Operating Weight - Maximum
24251 lb / 11000 kg
Cab - ROPS/FOPS
320 lb / 145 kg
Air Conditioning
99 lb / 45 kg
Note (2)
*Limited by engine speed to 40 km/h (25 mph).
Operating Weight - Maximum - ROPS Capacity
24251 lb / 11000 kg
Note (1)
Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 500/70-24 rear tires.
Dig Depth - Standard
14 ft / 4278 mm
Front Axle, AWD - Static
51808 lb / 23500 kg
Rear Axle - Dynamic
22046 lb / 10000 kg
Front Axle, AWD - Dynamic
19841 lb / 9000 kg
Rear Axle - Static
58422 lb / 26500 kg
Pump Type
Variable-flow, Axial Piston
System Pressure - Backhoe
3626 psi / 25000 kPa
Pump Capacity at 2,200 rpm
49.4 gal/min / 187 l/min
Type
Front Wheel Steering
System Pressure - Loader
3626 psi / 25000 kPa
Bore
2.6 in / 65 mm
Stroke
4.2 in / 106 mm
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
35.25 ft / 10.745 m
Axle Oscillation
11°
Power Steering
Hydrostatic
Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.92 ft / 8.205 m
Rod Diameter
1.6 in / 40 mm
Diesel Exhaust Fluid (DEF)
5 gal (US) / 19 l
Engine Oil - With Filter
2.4 gal (US) / 9 l
Rear Axle - Planetaries
0.4 gal (US) / 1.7 l
Cooling System with Air Conditioning
4.8 gal (US) / 18 l
Rear Axle
4.2 gal (US) / 16 l
Fuel Tank
42.3 gal (US) / 160 l
Hydraulic System
25.1 gal (US) / 95 l
Hydraulic Tank
11.1 gal (US) / 42 l
Center-Pivot Backhoe Loaders
440
440 Backhoe Loader
Brand
Caterpillar
Status
Current
Net Power - SAE J1349
104 hp / 78 kW
Displacement
268 in³ / 4.4 l
Net Torque Rise - 1,400 rpm - SAE J1349
360 ft·lbf / 487 N·m
Power Rating Conditions - No De-Rating Required Up To
7500 ft / 2286 m
Net Power Rating at 2,200 rpm - ISO 9249
104 hp / 78 kW
Net Power Rating at 2,200 rpm - SAE J1349
104 hp / 78 kW
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Ratings at 2,200 rpm - Gross Power ISO 14396
116 hp / 87 kW
Ratings at 2,200 rpm - Gross Power SAE J1995
118 hp / 88 kW
Engine Model
C4.4 ACERT 87 kW (116 hp) Electronic – Turbo Intercooled
Operating Weight - Maximum
29321 lb / 13300 kg
Cab - ROPS/FOPS
359 lb / 163 kg
Air Conditioning
101 lb / 46 kg
Note (2)
GP = General Purpose
Operating Weight - Maximum - ROPS Capacity
29321 lb / 13300 kg
Note (1)
*Machine equipped with 340/80-18 front and 500/70-24 rear, AWD, OROPS, 1.34 m³ (1.75 yd³) general purpose bucket with bolt-on cutting edge, standard stick, 610 mm (24"") severe-duty backhoe bucket.
Dig Depth - Standard
15.5 ft / 4718 mm
Front Axle, AWD - Static
50565 lb / 22936 kg
Rear Axle - Dynamic
20225 lb / 9174 kg
Front Axle, AWD - Dynamic
20225 lb / 9174 kg
Rear Axle - Static
50565 lb / 22936 kg
Pump Type
Variable Flow, Axial Piston
System Pressure - Backhoe
3800 psi / 26200 kPa
Pump Capacity at 2,200 rpm
58.1 gal/min / 220 l/min
Type
Front Wheel
System Pressure - Loader
3800 psi / 26200 kPa
Bore
3.35 in / 85 mm
Stroke
9.29 in / 236 mm
Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
36 ft / 10.97 m
Axle Oscillation
11°
Power Steering
Hydrostatic HMU
Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.8 ft / 8.18 m
Rod Diameter
1.65 in / 42 mm
Diesel Exhaust Fluid (DEF)
5 gal (US) / 19 l
Engine Oil - With Filter
2.3 gal (US) / 8.8 l
Rear Axle - Planetaries
0.4 gal (US) / 1.7 l
Cooling System with Air Conditioning
4.4 gal (US) / 16.5 l
Rear Axle
4.4 gal (US) / 16.5 l
Fuel Tank
42.3 gal (US) / 160 l
Hydraulic System
23.8 gal (US) / 90 l
Hydraulic Tank
10.6 gal (US) / 40 l