C9 ACERT™ (Water-Cooled Manifold)
C9 ACERT™ Water Cooled Manifold Engine
DESCRIPTION
Cat C9 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C9 ACERT engines to deliver excellent performance with low operating costs and emissions.Equipment powered by C9 ACERT engines include workover rigs, pump skids, acidizing units, cementing units, coil tubing units, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.C9 ACERT water-cooled manifold engines, with ratings: 242-254 bkW (325-340 bhp) @ 2200 rpm meet IMO Tier II, EPA Non-road Tier 3 equivalent and EU Stage IIIA equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.Engine Design
- Proven reliability and durability- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range- PTO drive options provide flexible access to auxiliarypower for pumps and other needs
Advanced Digital Engine Management
ADEM A4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonationcontrols into a complete engine management controlsystem with integrated digital ignition, engine protectionand monitoring
Air System
- Water-cooled exhaust manifold and turbo maintainATEX-compliant skin temperature during operation- Air Inlet shut-off enables emergency shut-off foroperator
Improved Serviceability
- Front, right, and rear dipstick- Remote oil and fuel filters- 12V and 24V electronic systems to improve applicationflexibility
Optional Equipment
- Air inlet for cold starting capability- Messenger display for operator friendly diagnostics- Spark arresting muffler
Custom Packaging
For any petroleum application, trust Caterpillar to meetyour exact needs with a factory custom package. Cat®engines, generators, enclosures, controls, radiators,transmissions — anything your project requires — can becustom designed and matched to create a one-of-a kindsolution. Custom packages are globally supported andare covered by a one-year warranty after startup
Transmissions
Caterpillar has a full line of engine/transmission packagesthat can be fully integrated with your axle, hydraulics, andoperator interface. Cat transmissions deliver continuousoperation under full load, smooth shifting at any speed,and maximum up time, with unmatched durability andeasy maintenance.
Full Range of Attachments
Large variety of factory installed engine attachmentsreduces packaging time
Testing
Every engine is full-load tested to ensure proper engineperformance.
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets- Cat factory-trained dealer technicians service everyaspect of your petroleum engine- Cat parts and labor warranty- Preventive maintenance agreements available for repairbefore-failure options- S•O•SSM program matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Turbocharger, separate circuit (SCAC) or remote (REMAC)aftercooler
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Air inlet 101.6 mm (4 in) connection type
- Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Fuel cooled ECU
- Power compensation for fuel temperature
- Programmable low and high idle
- Electronic diagnostics and fault logging
- Programmable monitoring system (engine speed, temperature,pressure)
- J1939 broadcast (diagnostic and engine status)
- Certified electrical control system (hazardous environment only)
- Derated engine: automatic ambient temperature compensation
- Cooling System
- Thermostats and housing, RH forward-facing outlet — 51 mm(2.01 in) connection
- Jacket water pump — belt-driven, centrifugal
- Water pump — inlet RH facing downward 63 mm (2.48 in)
- Exhaust System
- Exhaust manifold — water-cooled
- Single, right-side, center-mounted turbo with water-cooledturbine housing
- Rear facing turbo exhaust 81.8 mm (3.22 in) connection, nonV-band clamp
- Flywheels and Flywheel Housing
- Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation
- Fuel System
- HEUI fuel system
- Fuel filter — secondary, LH (2-micron high performance)
- Fuel transfer pump — left front
- Fuel priming pump — left front
- Lube System
- Crankcase breather — LH
- Crankcase fumes disposal — with integrated service indicator, LH
- Oil cooler — RH
- Oil filter — RH
- Oil pan — front sump
- Oil filler — top mounted
- Oil level gauge — LH side
- Oil pump — gear-driven
- Oil valve sampling
- Preservation of turbocharger, flywheel, and crankcase
- Power Take-Offs
- Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter,22.3 mm (7/8 in) wide
- General
- Vibration damper
- Lifting eyes
- Automatic variable timing — electronic
- Literature
- Mandatory Options
- Flywheel housing and flywheel
- Throttle position sensor and/or throttle control
- (Non-hazardous environment only)
- Primary filter/water separator
- Turbo orientation
Optional Equipment
- Air Compressors
- Air compressors
- Air compressor governor
- Air Inlet System
- Air cleaner
- Precleaner
- Air inlet elbow
- Air shutoffs
- Charging Systems
- Charging alternators
- Alternator mounting
- Alternator belt tensioner
- Alternator pulleys
- Alternator guards
- Cooling System
- Radiators
- Fan drive and pulley — f/u/w radiator packages
- Fans f/u/w radiator packages
- Coolant level sensor
- Fan drive mountings
- Fan adapters
- Fan adapter for blower fans
- Fan pulleys
- Fan height instructions
- Vee belts for customer-supplied radiators
- Suction fans and blower fans
- Water inlet elbows
- Dry charge coolant conditioners
- Emissions Certifications
- IMO certification
- Exhaust System
- Flexible fitting
- Turbocharger exhaust outlet adapters
- Elbows, flange, pipes, clamp
- Rain caps
- Manifolds
- Mufflers
- Flywheels and Flywheel Housing
- Crankshaft seal
- Fuel System
- Flexible fuel lines
- Water separator and fuel filters
- Fuel cooler
- Instrumentation
- Gauges and instrument panels
- Interconnect harness
- Voltmeters
- Gauge mounting
- Ammeter
- Lube System
- Oil pans
- Drain and cover
- Oil level gauges
- Remote oil filter
- Oil fillers
- Lubricating oil
- Fumes disposal
- Mounting System
- Structural steel base
- Engine support — front and rear
- Power Take-Offs
- Enclosed clutch
- Clutch supports
- Flywheel stub shaft
- Hydraulic pump drives
- Hydraulic gear pumps
- Starting System
- Starting aids
- Electric starting motors — 12V and 24V
- Battery sets — 12V and 24V (dry)
- Battery cable
- General
- Tool set
Specs
Overview
General Specifications
Emissions
Dimensions
Capacity for Liquids
SEE HOW C9 ACERT™ (Water-Cooled Manifold) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 340 BHP / 254 bkW
- Displacement
- 538 in³ / 8.8 l
- Minimum Rating
- 325 BHP / 242 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1 or 2
- Flywheel Teeth
- 113 (SAE 1), 134 (SAE 2)
- Stroke
- 5.8 in / 149 mm
- Bore
- 4.4 in / 112 mm
- Emissions
- EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
- Length
- 43 in / 1092 mm
- Width
- 32.6 in / 828 mm
- Height
- 40.3 in / 1024 mm
- Weight
- 1576 lb / 716 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 340 BHP / 254 bkW
- Displacement
- 537.96 in³ / 8.82 l
- Minimum Rating
- 325 BHP / 242 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1 or 2
- Flywheel Teeth
- 113 (SAE 1), 134 (SAE 2)
- Stroke
- 5.8 in / 149 mm
- Bore
- 4.4 in / 112 mm
- Emissions
- EPA and CARB Non-Road Tier 3, EU Stage IIIA, EPA Marine Tier 2, IMO Tier II
- Length
- 43 in / 1092 mm
- Width
- 32.6 in / 828 mm
- Height
- 40.3 in / 1024 mm
- Weight
- 1578 lb / 716 kg
- Brand
- Caterpillar
- Status
- Current
- Maximum Rating
- 455 BHP / 340 bkW
- Displacement
- 567.5 in³ / 9.3 l
- Minimum Rating
- 335 BHP / 250 bkW
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE 1 or 2
- Flywheel Teeth
- 113 (SAE 1), 138 (SAE 2)
- Stroke
- 5.9 in / 149 mm
- Bore
- 4.5 in / 115 mm
- Emissions
- EPA Tier 4 Final and EU Stage IV
- Length
- 44.3 in / 1125 mm
- Width
- 31.1 in / 791 mm
- Height
- 41.9 in / 1068 mm
- Weight
- 1907 lb / 865 kg