CC2.7 GC

CC2.7 GC Utility Compactor

The CC2.7 GC is a 2.7 metric ton machine with 1000 mm (39 in) drums. It's a versatile machine with a high amplitude and is an excellent match for car parks, shoulders, small parking lots, lane additions, and other similar sized jobs.

CC2.7 GC  Utility Compactors

DESCRIPTION

The CC2.7 GC is a 2.7 metric ton machine with 1200 mm (47 in) drums. It is well suited for a variety of applications from asphalt to granular base applications. Simplicity, durability, and easy access to routine service points make these compactors an asset to contractors and rental houses.The CC2.7 GC is a 2.7 metric ton machine with 1200 mm (47 in) drums. It's a versatile machine with a high amplitude and is an excellent match for car parks, shoulders, small parking lots, lane additions, and other similar sized jobs.

Simple to Operate

        
  • Convenient, dual-side access with large handrails and wide slip-resistant steps simplify ingress/egress
  •     
  • Operating console includes gauges for fuel level, water tank level, hour meter, engine coolant temperature as well as warning light indicators to help keep the operator informed
  •     
  • Durable rocker style switches provide easy activation for engine speed, vibratory drum selection, parking brake, lights, and the optional warning beacon
  •     
  • Engine speed is controlled with a momentary selection switch for low, mid-range, and high speed settings 
  •     
  • Optional fore/aft and side to side seat adjustments combine with dual propel levers to enable good visibility to either side of the machine

Operator console and controls on the Cat CC2.7 GC tandem roller.
Cat CC2.7 GC tandem vibratory roller.

Proven Powertrain

        
  • Efficient Cat® C1.7T engine provides 18.4 kW (24.7 hp) of power (U.S. EPA Engine power is 17.8 kW (23.8 hp)​.
  •     
  • Auto-warmup feature is designed to prevent vibratory system activation and high engine idle speed until the hydraulic system reaches 10º C (50º F) 
  •     
  • Auto-idle shutdown activates after the factory set default of 30 minutes, shutdown time can be adjusted with Cat Electronic Technician (Cat ET)​
  •     
  • Maximum gradeability occurs when operated with the mid-range engine speed of 1800 rpm selected, while maximum travel speed occurs at the high engine speed of 2200 rpm
  •     
  • Optional traction control is designed to minimize drum slips and enhance gradebility

Compaction Performance

        
  • Two vibratory frequencies of 50 Hz (3000 vpm) and 62 Hz (3720 vpm) correspond with engine speeds of 1800 rpm and 2200 rpm to provide working speed versatility
  •     
  • Front only, rear only, or both drum vibratory capablities help operators conform to a variety of conditions
  •     
  • Automatic vibratory control offers ramp in, ramp out adjustment, configurable through Cat ET 
  •     
  • Optional Compaction Meter Value (CMV) is designd to keep the operator informed of compaction performance and provide quality control measures
  •     
  • Single point lift option and robust hitch design provides transport options as well as expanded application versatility for trench work
  •     
  • Ballast options mounted to the drum supports provide flexibility that increases static linear load for addtional compaction performance

Front drum of the Cat CC2.7 GC tandem roller equipped with the optional ballast.
Spray nozzle and drum scraper on the Cat CC2.7 GC tandem roller.

Keep the Drums Clean

        
  • Pressurized water spray system with intermittent settings is designed to help operators match conditions for efficient performance 
  •     
  • Triple filtration helps prevent clogs with filters located at the fill point, water pump, and spray nozzles
  •     
  • The automatic on/off feature deactivates the water spray system when the propel lever moves to neutral and activates the system when the propel lever moves from neutral
  •     
  • Adjustable folding or fixed design drum scraper options are available 
  •     
  • The integrated freeze protection kit (optional) provides protection in cold temperatures when the machine is not in use

Service and Maintenance

        
  • VisionLink® is a cloud-based software application that provides data to desktop or mobile devices, taking the guesswork out of fleet management with key insights to maximize performance – regardless of fleet size or equipment manufacturer​
  •     
  • Cat Electronic Technician (Cat ET) capability provides service and trouble-shooting simplification
  •     
  • Oil change interval of 500 hours is designed to limit downtime and reduce routine maintenance costs
  •     
  • External fuel fill with lockable cap offers easy access, while providing security
  •     
  • LED lighting delivers good job site illumination while conserving energy
  •     
  • Uptime kits and Customer Value Agreements (CVA) are designed to limit downtime 

Under the hood of the Cat CC2.7 GC tandem roller.
Steps, handrail and high visibility seatbelt on the Cat CC2.7 GC tandem roller.

Safety

        
  • An operator presence switch located in the seat is designed to prevent machine operation when not activated
  •     
  • The seat is equipped with a standard 75 mm (3"), high-visibility, seatbelt that is designed to simplify in-use recognition
  •     
  • Slip resistant steps and platform make it easier for operator ingress/egress
  •     
  • Quick-connect harness supports easy installation and removal of the warning beacon

Features

  • Sustainability

    • The Cat® C1.7T engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
    • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)** or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
    • Auto engine idle shutdown helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
    • A well-trained operator is worth the investment. Skilled operators benefit your bottom line by maximizing productivity, avoiding costly downtime, and maintaining jobsite safety – which can help to improve fuel efficiency and reduce greenhouse gas emissions.
    • Extended maintenance intervals not only reduce downtime but can decrease the amount of fluid and filters that are replaced over the life of the machine. The hydraulic oil can be replaced every 3000 hours, eccentric housing oil can be replaced every 3000 hours, and engine oil changes can be 500 hours.
    • Cat Compact technologies help you consistently meet compaction targets faster, more uniformly, and in fewer passes - saving on fuel and reducing rework and material costs.
    • Cat Scheduled Oil Sampling (S•O•S℠) Services helps reveal excessive wear, contaminated fluids or other “unseen” issues that can shorten component life. In many cases, you can extend oil and coolant change intervals by using fluid monitoring. Consult your Cat dealer or the machine's operation and maintenance manual for more information.
    • Remote Flash for engines helps to minimize downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
    • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
    **Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • OPERATOR ENVIRONMENT
    • Adjustable Suspension Seat with Operator Presense Switch
    • ROPS Folding
    • Seat Belt - 75 mm (3 in) high visibility orange
    • Operator Console w/ Water Tank Gauge, Emergency Stop, and Glove Box
    • 12-volt Power Outlet
    • Horn, Backup Alarm
  • COMPACTON SYSTEM
    • Folding Scrapers
    • Vibe Selection - front, rear, or both
    • Pressurized, Triple-Filtration Spray System with Test Mode
  • POWERTRAIN
    • Auto Engine Off and Auto Warmup
    • Air Cleaner, Dual Element
    • Engine Belt Guard
  • TECHNOLOGY
    • Telematics
  • ELECTRICAL
    • LED Working Lights
  • OTHER
    • Vandal Protection - lockable hood, fuel fill, and controls cover
    • Machine Life and Tiedowns
    • Offsets Hitch

Optional Equipment

  • OPERATOR ENVIRONMENT
    • ROPS Fixed
    • Sun Canopy
    • Seat - Side Shift
    • Dual Propel Levers
  • COMPACTON SYSTEM
    • Fixed Scrapers
    • Cocoa Mats
    • Edge Cutter Ready
    • Water Sprayer Antifreeze Kit
    • Ballast Kit - 200 kg (440 lb)
    • Ballast Kit - 400 kg (880 lb)
  • POWERTRAIN
    • Traction Control
  • TECHNOLOGY
    • Remote Flash / Troubleshoot
    • CMV - Compaction Measurement Value
  • ELECTRICAL
    • Battery Disconnect
    • LED Roading Lights
    • Rotating Amber Beacon
  • OTHER
    • Biodegradeable Hydraulic Oil
    • Bumpers
    • Single Point Lift
    • Custom Paint

Specs

Overview

Long Name:
CC2.7 GC Utility Compactor
Name:
CC2.7 GC
Brand:
Cat
Status:
Current

Weights

Standard Operating Weight with ROPS
5718 lb / 2599 kg
Maximum Weight at Front Drum
2882 lb / 1310 kg
Maximum Weight at Rear Wheels
2836 lb / 1289 kg
Maximum Operating Weight
3114 lb / 2779 kg

Dimensions

Compaction Width
51.7 in / 1312 mm
Height - ROPS
102.2 in / 2595 mm
Wheel Base
70.9 in / 1800 mm
Drum Diameter
28.3 in / 720 mm
Overall Length
100.2 in / 2596 mm
Overall Width
51.7 in / 1312 mm
Drum Width
47.2 in / 1200 mm

Engine

Engine Power (1)
24.7 hp / 18.4 kW
Engine Model
C1.7T

Vibratory System

Centrifugal Force - Maximum
6968.8 lb / 31 kN
Nominal Amplitude - High
0.02 in / 0.52 mm
Frequency
62 Hz / 3720 VPM

Operating Specifications

Turning Radius - Inside Drum Edge
100 in / 2540 mm
Travel Speed - Maximum
5.3 mile/h / 8.6 km/h
Drum Offset
2 in / 50 mm
Static Linear Load
61 lb/in / 13.1 kg/cm
Curb Clearance
17.8 in / 453 mm
Turning Radius - Outside Drum Edge
147.2 in / 3740 mm
Ground Clearance
11.2 in / 285 mm

Service Refill Capacities

Fuel Tank Capacity
14.37 gal (US) / 55 l
Water Spray Tank Capacity
42.24 gal (US) / 160 l

SEE HOW CC2.7 GC COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Tandem Vibratory Rollers
CC2.7 GC
CC2.7 GC  Utility Compactors
Brand
Cat
Status
Current
Standard Operating Weight with ROPS
5718 lb / 2599 kg
Compaction Width
51.7 in / 1312 mm
Height - ROPS
102.2 in / 2595 mm
Wheel Base
70.9 in / 1800 mm
Drum Diameter
28.3 in / 720 mm
Overall Length
100.2 in / 2596 mm
Overall Width
51.7 in / 1312 mm
Drum Width
47.2 in / 1200 mm
Engine Power (1)
24.7 hp / 18.4 kW
Engine Model
C1.7T
Nominal Amplitude - High
0.02 in / 0.52 mm
Turning Radius - Inside Drum Edge
100 in / 2540 mm
Travel Speed - Maximum
5.3 mile/h / 8.6 km/h
Drum Offset
2 in / 50 mm
Static Linear Load
61 lb/in / 13.1 kg/cm
Curb Clearance
17.8 in / 453 mm
Turning Radius - Outside Drum Edge
147.2 in / 3740 mm
Ground Clearance
11.2 in / 285 mm
Fuel Tank Capacity
14.37 gal (US) / 55 l
Water Spray Tank Capacity
42.24 gal (US) / 160 l
Tandem Vibratory Rollers
CC2.7
CC2.7 combination tandem roller left side
Brand
Cat
Status
Current
Standard Operating Weight with ROPS
5718 lb / 2599 kg
Compaction Width
47.2 in / 1200 mm
Height - ROPS
109.7 in / 2786 mm
Wheel Base
70.9 in / 1800 mm
Drum Diameter
28.3 in / 720 mm
Overall Length
99.2 in / 2520 mm
Overall Width
51.7 in / 1312 mm
Drum Width
47.2 in / 1200 mm
Engine Power (1)
48.2 hp / 36 kW
Engine Model
C1.7T
Nominal Amplitude - High
0.02 in / 0.52 mm
Turning Radius - Inside Drum Edge
100 in / 2540 mm
Travel Speed - Maximum
6.8 mile/h / 11 km/h
Drum Offset
2 in / 50 mm
Static Linear Load
66.2 lb/in / 11.85 kg/cm
Curb Clearance
17.8 in / 453 mm
Turning Radius - Outside Drum Edge
147.2 in / 3740 mm
Ground Clearance
11.2 in / 285 mm
Fuel Tank Capacity
14.37 Gal / 55 l
Water Spray Tank Capacity
42.24 gal (US) / 160 l
Tandem Vibratory Rollers
CC4.0
CC4.0 Utility Compactor
Brand
Cat
Status
Current
Standard Operating Weight with ROPS
7889 lb / 3586 kg
Compaction Width
51.2 in / 1300 mm
Height - ROPS
104.7 in / 2660 mm
Wheel Base
80.7 in / 2050 mm
Drum Diameter
31.5 in / 800 mm
Overall Length
112.3 in / 2853 mm
Overall Width
55.1 in / 1400 mm
Drum Width
51.2 in / 1300 mm
Engine Power (1)
48.2 hp / 36 kW
Engine Model
C1.7T
Nominal Amplitude - High
0.02 in / 0.5 mm
Turning Radius - Inside Drum Edge
115.2 in / 2926 mm
Travel Speed - Maximum
7.5 mile/h / 12 km/h
Drum Offset
2 in / 50 mm
Static Linear Load
59.8 lb/in / 13.9 kg/cm
Curb Clearance
19.6 in / 499 mm
Turning Radius - Outside Drum Edge
166.4 in / 4226 mm
Ground Clearance
11.2 in / 284 mm
Fuel Tank Capacity
21.43 gal (US) / 81 l
Water Spray Tank Capacity
61 gal (US) / 230 l