P224 Secondary Pulverizer
P224 Secondary Pulverizer
Cat® P224 Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.
DESCRIPTION
Cat P200 Series Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.Cat® Pulverizers are perfectly matched to Cat excavators so you can deliver productive concrete demolition without compromising performance or machine health. Cat P200 Series Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.HIGH PERFORMANCE
- Cat pulverizer jaws are designed to cut through material quickly to enhance your machine’s overall operating efficiency and help reduce fuel consumption.
- The oversized cylinder on the non-rotating secondary pulverizer delivers a strong crushing force to reduce concrete and separate rebar.
- The Speed Booster valve actively balances speed and power, delivering fast cycle times and strong closing force to help increase productivity.
EASY TO MAINTAIN
- Replaceable wear parts can be swapped quickly in the field and do not require surface welding to help reduce service time.
- Daily wear parts inspection and grease points are accessible from the ground with the pulverizer still mounted on the machine.
- Safely perform maintenance with easy access through one inspection panel.
- Hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
RELIABILITY AND DURABILITY
- Cat pulverizers are manufactured with high-strength, abrasion-resistant steel, especially in excessive wear areas.
- Reinforced cylinder rod hinges on the moveable jaw are designed to help boost durability and life of the pulverizer.
- The C-shaped cylinder guard provides extra protection against concrete demolition.
- Cat pulverizers have a versatile use across demolition applications, making them your choice for a wide variety of job sites.
BOOST EFFICIENCY AND PRODUCTIVITY WITH INTEGRATED TECHNOLOGIES
- Never waste time looking for your attachments again. Cat asset tracking is available on all pulverizers.
- Track your entire fleet of attachments and machines from one source. Pulverizers with asset tracking can be viewed within VisionLink®.
- Keep your assets secure. Pulverizers with an asset tracker send an alert if they leave an easy-to-set-up site boundary.
VERSATILITY AND CONVENIENCE WITH COUPLERS
- Share pulverizers and other attachments of the same size class across multiple machines by adding a quick coupler.
- Significantly reduce the time it takes to switch attachments when using a quick coupler.
- Quick couplers add a new level of safety to your job site with the ability to switch attachments while the operator stays in the cab with built-in redundancies to keep your attachments secure in the event of a pressure loss.
- A variety of couplers are available to suit your specific needs:
- Cat Pin Grabber Couplers – dedicated pin system
- CW Dedicated Couplers – wedge-style, dedicated system
- S Type Couplers – wedge-style, dedicated system
- Hydraulic Connecting CW Couplers – hydraulic connecting version of the CW coupler with instant hydraulic capability upon connection
- Hydraulic Connecting S Type Couplers – hydraulic connecting version of the S type coupler with instant hydraulic capability upon connection
- Specs
- Docs
Specs
Overview
Long Name:
P224 Secondary Pulverizer
Name:
P224 Secondary Pulverizer
Brand:
Cat
Status:
Current
Performance
Cycle Time - Open
1.9 s / 1.9 s
Cycle Time - Close
1.3 s / 1.3 s
Crushing Force - Primary Cutter
409 Sh Ton / 3640 kN
Crushing Force - Tip
129 Sh Ton / 1145 kN
Crushing Force - Primary Tooth
224 Sh Ton / 1990 kN
Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure
4786 psi / 33000 kPa
Jaw Circuit - Max. Oil Flow
74 gal/min / 280 l/min
Dimensions - Jaw
Jaw Depth
33.3 in / 845 mm
Cutter Length
7.9 in / 200 mm
Jaw Opening - Maximum
46.3 in / 1175 mm
Jaw Width - Fixed
26 in / 660 mm
Jaw Width - Moveable
15 in / 380 mm
Dimensions - Housing + Jaw
Length
107.3 in / 2725 mm
Height
62.4 in / 1585 mm
Width
26 in / 660 mm
Weight
Weight - Housing, Jaw and Bracket
5952 lb / 2700 kg
Recommended Carrier Weight
Excavator Minimum
24000 kg (52900 lb)
Excavator Maximum
35000 kg (77200 lb)
SEE HOW P224 Secondary Pulverizer COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Secondary Pulverizer
P224 Secondary Pulverizer
- Brand
- Cat
- Status
- Current
- Cycle Time - Open
- 1.9 s / 1.9 s
- Cycle Time - Close
- 1.3 s / 1.3 s
- Crushing Force - Primary Cutter
- 409 Sh Ton / 3640 kN
- Crushing Force - Tip
- 129 Sh Ton / 1145 kN
- Crushing Force - Primary Tooth
- 224 Sh Ton / 1990 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 74 gal/min / 280 l/min
- Jaw Depth
- 33.3 in / 845 mm
- Cutter Length
- 7.9 in / 200 mm
- Jaw Opening - Maximum
- 46.3 in / 1175 mm
- Jaw Width - Fixed
- 26 in / 660 mm
- Jaw Width - Moveable
- 15 in / 380 mm
- Length
- 107.3 in / 2725 mm
- Height
- 62.4 in / 1585 mm
- Width
- 26 in / 660 mm
- Weight - Housing, Jaw and Bracket
- 5952 lb / 2700 kg
- Excavator Minimum
- 24000 kg (52900 lb)
- Excavator Maximum
- 35000 kg (77200 lb)
Selected Model
Secondary Pulverizer
P218 Secondary Pulverizer
- Brand
- Cat
- Status
- Current
- Cycle Time - Open
- 1.8 s / 1.8 s
- Cycle Time - Close
- 1.2 s / 1.2 s
- Crushing Force - Primary Cutter
- 351 Sh Ton / 3125 kN
- Crushing Force - Tip
- 107 Sh Ton / 955 kN
- Crushing Force - Primary Tooth
- 192 Sh Ton / 1710 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 59 gal/min / 225 l/min
- Jaw Depth
- 30.3 in / 770 mm
- Cutter Length
- 5.9 in / 150 mm
- Jaw Opening - Maximum
- 42.1 in / 1070 mm
- Jaw Width - Fixed
- 24.4 in / 620 mm
- Jaw Width - Moveable
- 13.2 in / 335 mm
- Length
- 97 in / 2465 mm
- Height
- 57.1 in / 1450 mm
- Width
- 24.4 in / 620 mm
- Weight - Housing, Jaw and Bracket
- 4409 lb / 2000 kg
- Excavator Minimum
- 18000 kg (39700 lb)
- Excavator Maximum
- 25000 kg (55100 lb)
Secondary Pulverizer
P232 Secondary Pulverizer
- Brand
- Cat
- Status
- Current
- Cycle Time - Open
- 1.9 s / 1.9 s
- Cycle Time - Close
- 1.4 s / 1.4 s
- Crushing Force - Primary Cutter
- 479 Sh Ton / 4265 kN
- Crushing Force - Tip
- 153 Sh Ton / 1360 kN
- Crushing Force - Primary Tooth
- 252 Sh Ton / 2240 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 95 gal/min / 360 l/min
- Jaw Depth
- 36.6 in / 930 mm
- Cutter Length
- 7.9 in / 200 mm
- Jaw Opening - Maximum
- 50.4 in / 1280 mm
- Jaw Width - Fixed
- 26.4 in / 670 mm
- Jaw Width - Moveable
- 15 in / 380 mm
- Length
- 117.9 in / 2995 mm
- Height
- 69.1 in / 1755 mm
- Width
- 26.4 in / 670 mm
- Weight - Housing, Jaw and Bracket
- 7628 lb / 3460 kg
- Excavator Minimum
- 32000 kg (70500 lb)
- Excavator Maximum
- 50000 kg (110200 lb)