PC310

PC310 High Flow XPS Cold Planer

Studio Shot

DESCRIPTION

High speed drum and conical bits quickly remove asphalt and concrete prior to resurfacing.Cat® Cold Planers are designed for small paving jobs in residential and commercial applications and are primarily used to economically restore asphalt and concrete surfaces. They are ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited. The Cat Cold Planers are designed for use on Cat Skid Steer Loaders, Compact Track Loaders, Compact Wheel Loaders and Backhoe Loaders.

Application

Designed for small paving jobs in residential and commercial applications, and are primarily used to economically restore asphalt and concrete surfaces. Ideal for milling imperfections prior to resurfacing, removing deteriorated pavement, removing traffic lane stripes and jobs where the use of dedicated planers is limited.

Self-leveling Design

Self-leveling design automatically levels itself when placed on the ground for consistent depth control without operator adjustments and excellent spoil retention.

Two Wear-Resistant Skid Plates

Two wear-resistant skid plates remain parallel to the ground for optimum stability.

Hydraulic Side shift

Hydraulic side shift permits close planing to curbs, walls and other obstructions.

Independent Left/Right Depth Control

Independent left/right depth control allows maximum drum depths to be adjusted independently on each skid. Gauges are easily viewable from the cab. Independent depth control is mechanical on the PC104 and PC105 models; hydraulic independent depth control is standard on the PC305-PC412 models.

Max Pro Pressure Gauge

Max Pro Pressure Gauge provides operator feedback to adjust speed for maximum productivity in changing material loads. Gauge displays planer performance in real-time conditions and is visible from the cab. Standard on all models.

Direct Drive System

Direct drive system on the standard flow models features a variable speed, uni-directional, gerotor style hydraulic motor. Direct drive system on high flow and XHP models features a hydraulic radial piston motor to ensure maximum cutting rate and drum torque for optimal production performance and efficiency.

Float, Spring Tilt and Hydraulic Tilt

Float enables planers to follow the contour of the surface. Float is activated by a knob and is only available on high flow and XHP planers. Spring tilt and hydraulic tilt enable planers to oscillate for angled cuts. Tilt is hydraulically controlled on high flow models and spring controlled on standard flow planers.

Bits Options

All purpose conical bits are standard. Optional concrete bits, heavy duty concrete bits, and heavy duty asphalt bits are also available. Tools to change out the bits are included.

Cut Mark

Indicates contact point of drum with surface based on depth of cut, so an assistant can communicate with the operator when to start and stop the cut.

Drum Center Indicator

Indicates center of the drum on the side of the planer.

Fast Cut Asphalt Drums Standard

Fast cut asphalt drums require less power for cutting due to increased spacing between cutting lines on the drum. These drums improve productivity in asphalt applications, and are now standard on all models. Multi-purpose and optional-width drums are also available.

Serrated Steps

Serrated steps allow for safe and easy access in and out of the cab. A new center step enables even easier access and shorter step lengths by the operator.

OMM Container

Stores the OMM (Operation and Maintenance Manual) in a protective case on the attachment, where it can be conveniently accessed.

Optional Integrated Water Tank

Coupler frame-mounted water tank provides 160 liters (42 gallons) capacity with a tank level sight gauge. Can be combined with cab-mounted water tank for additional capacity and run time. Sprinkler kit included if cold planer is ordered with a water tank installed. Water tank not available on XD models.

  • Specs
  • Docs

Specs

Overview

Long Name:
PC310 High Flow XPS Cold Planer
Name:
PC310
Brand:
Cat
Status:
Current
Working Width
39.4 in / 1000 mm
Maximum Cutting Depth
5.1 in / 130 mm
Required Hydraulics
High Flow XPS
Overall Width
73.1 in / 1858 mm
Overall Length
44.3 in / 1125 mm
Overall Height
36.8 in / 935 mm
Weight
2292.8 lb / 1040 kg
Optimal Hydraulic Flow
98-125 L/min (26-33 gpm)
Optimal Hydraulic Pressure
230-280 bar (3300-4000 psi)
Drum Speed
155 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
23.1 in / 587 mm
Conical Bits
78
Standard Bit Type
All Purpose

SEE HOW PC310 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Cold Planers
PC310
Studio Shot
Brand
Cat
Status
Current
Working Width
39.4 in / 1000 mm
Maximum Cutting Depth
5.1 in / 130 mm
Required Hydraulics
High Flow XPS
Overall Width
73.1 in / 1858 mm
Overall Length
44.3 in / 1125 mm
Overall Height
36.8 in / 935 mm
Weight
2292.8 lb / 1040 kg
Optimal Hydraulic Flow
98-125 L/min (26-33 gpm)
Optimal Hydraulic Pressure
230-280 bar (3300-4000 psi)
Drum Speed
155 rpm
Tilt Angle Range +/-
6.5 degrees
Side Shift Travel
23.1 in / 587 mm
Conical Bits
78
Standard Bit Type
All Purpose
Cold Planers
PC306 XD
Studio Shot
Brand
Cat
Status
Current
Working Width
23.6 in / 600 mm
Maximum Cutting Depth
9.8 in / 250 mm
Required Hydraulics
High Flow XPS
Overall Width
73.1 in / 1858 mm
Overall Length
62 in / 1576 mm
Overall Height
43.8 in / 1113 mm
Weight
3108.5 lb / 1410 kg
Optimal Hydraulic Flow
98-125 L/min (26-33 gpm)
Optimal Hydraulic Pressure
230-280 bar (3300-4000 psi)
Drum Speed
119 rpm
Tilt Angle Range +/-
5.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
48
Standard Bit Type
All Purpose
Cold Planers
PC310 XD
Studio Shot
Brand
Cat
Status
Current
Working Width
39.4 in / 1000 mm
Maximum Cutting Depth
8.7 in / 220 mm
Required Hydraulics
High Flow XPS
Overall Width
73.1 in / 1858 mm
Overall Length
59 in / 1498 mm
Overall Height
43.3 in / 1099 mm
Weight
3838.2 lb / 1741 kg
Optimal Hydraulic Flow
98-125 L/min (26-33 gpm)
Optimal Hydraulic Pressure
230-280 bar (3300-4000 psi)
Drum Speed
111 rpm
Tilt Angle Range +/-
5.5 degrees
Side Shift Travel
25.6 in / 650 mm
Conical Bits
66
Standard Bit Type
All Purpose