C280
Cat C280 Marine Auxiliary Engines
DESCRIPTION
Cat C280 Marine Auxiliary EnginesA3 ECU - Advantages
CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing
A3 ECU - Electronic Advantages
Load feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters
A3 ECU - Data Advantages through J1939 Link
Engine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset
Customer Interface Panel
Interfaces with standard Cat® Marine Monitoring System (PLC in Price List) Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection
Electronic Unit Injectors
“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- General
- LH and RH service availability
- Air Inlet System
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Dual turbochargers, rear-mounted, engine oil lubricated
- Crankcase breathers, top mounted
- Air inlet adapter - Straight / 90 degree / 35 degree
- Control System
- Dual Caterpillar ADEM A4 Electronic Engine Control Modules
- Rigid Wiring Harness
- Cooling System
- Aftercooler/Oil cooler and jacket water gear driven pumps
- Engine coolant water drains
- Engine coolant water drains
- Engine coolant water drains
- Single Circuit / Separate Circuit Aftercooler
- Exhaust System
- Dry exhaust manifold
- Turbo speed sensors - Overspeed protection
- Fuel System
- Fuel transfer pump, gear driven
- Electronically Controlled Unit Injectors
- Duplex Fuel filters
- Instrumentation
- Cat Alarm & Protection System
- Lube System
- Oil pump, gear driven
- Duplex centrifugal oil filter, engine mounted
- Wet sump
- Prelube pump - air / electric
- Protection System
- Crankcase explosion relief valves
Optional Equipment
- Fuel System
- SOLAS shielding
- Lube System
- SOLAS shielding
- Protection System
- Mounted oil mist detector
- Cylinder pressure relief valves
Specs
Overview
Power Rating
Generator Set Specifications
Engine Specifications
Power Rating
Engine Specifications
Dimensions & Weights
SEE HOW C280 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 1730 - 5420 bkW
- Frequency
- 50 / 60
- Emissions
- U.S. EPA Tier 4
- Minimum Rating
- 2320 BHP / 1730 bkW
- Maximum Rating
- 7268 BHP / 5420 bkW
- Aspiration
- Turbocharged - Aspirator
- Bore
- 11 in / 280 mm
- Stroke
- 11.8 in / 300 mm
- Configuration
- In-Line 6, V 8, V 12, V 16, 4-Stroke-Cycle Diesel
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 404 - 803 hp
- Frequency
- 50 / 60
- Emissions
- IMO II/III, EPA T 3, EU IWW, EU Stage V, China II
- Minimum Rating
- 404 BHP / 465 bkW
- Maximum Rating
- 803 BHP / 599 bkW
- Aspiration
- TA, TTA
- Bore
- 5.7 in / 145 mm
- Stroke
- 7.2 in / 183 mm
- Configuration
- In-Line 6, 4-Stroke-Cycle Diesel
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 781 - 1047
- Frequency
- 50 / 60
- Emissions
- IMO II, IMO III U.S. EPA T4, EU Stage V and China-II
- Minimum Rating
- 1047 BHP / 781 bkW
- Maximum Rating
- 1332 BHP / 994 bkW
- Aspiration
- Turbocharged- Aftercooled
- Bore
- 5.71 in / 145 mm
- Stroke
- 6.38 in / 162 mm
- Configuration
- V 12, 4-stroke-cycle diesel