631

631 Wheel Tractor-Scraper

631 Open Bowl Scraper

DESCRIPTION

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

631K Delivering more for Q.H. & M. Birt

Wheel Tractor-Scraper K Series

Wheel Tractor-Scraper K Series Operator Testimonial

Wheel Tractor Scraper CAT® 631K C202

Be More Productive

        
  • The Advanced Productivity Electronic Control System (APECS) allows
        the engine and transmission to communicate on a high level. This
        communication allows the machine to utilize better the power
        and torque the engine is producing. The net result is moving more
        material.
    •     
  • Use Ground Speed Control to set the desired top speed and the machine will find the gear that works best for the engine and the
        transmission, providing a lower fuel burn.
    •     
  • The machine speed limit feature allows the machine to maintain a
        set top speed instead of relying on top gear selector.
    •     
  • Auto-Stall assists in quickly bringing the transmission to an
        operating temperature at start-up when the machine is working in a cold climate region.
    •     
  • Cat® Payload for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator
        effort.
    •     
  • Enhance productivity through the usage of Cat Payload with
        Sequence Assist.









Be More Productive
Work in Comfort

Work in comfort

        
  • Reduce up to 14 individual operator commands per cycle with Sequence Assist.
    •     
  • Steer with less effort using the newly designed high-pressure steering system.
    •     
  • Enjoy interior improvements and a more ergonomic work
        environment with a 21% larger cab than the G Series cab.
    •     
  • Intuitive, ergonomic controls keep operators focused on their work.
    •     
  • Maintain desired cab temperature with automatic temperature control.





Designed for Safety

        


  • Enhance an operator’s awareness of site surroundings with the work area vision system (WAVS).
    •     
  • Get in and out of the cab easier with the new powered access ladder system (optional attachment).
    •     
  • Seat belt indicator provides visual and audible alerts when the seatbelt is not in use.
    •     
  • Advanced Cushion Hitch allows the cushion hitch to prevent endstroke by predicting endstroke events and managing the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
    •     
  • The fuel fill, fuel filter, engine oil filter, engine oil change, and water drain are easily accessible at ground level.








Designed for Safety
Easy to Operate

Easy to Operate

        
  • The spacious cab features easy, intuitive controls and excellent visibility
    . The cab provides a comfortable working environment for all-day
     operation.
    •     



  • Cat advanced ride management (ARM) seat suspension reduces end
     stroke movement of the load cylinder for a smoother ride.
    •     





  • Engine overspeed protection will automatically engage with no operator
     input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.

Integrated Cat Technologies

        
  • Monitor, manage, and enhance jobsite operations.
    •     
  • Hit the target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
    •     
  • Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
    •     
  • Access information anytime, anywhere with VisionLink® – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
        jobsite.
    •     
  • Shorten the learning curve for inexperienced operators with
        Sequence Assist and Load Assist (included with Cat Grade
        attachment).





Integrated Cat Technologies
Execute Efficiency

Execute Efficiency

        
  • The new tractor hydraulic on -demand fan helps assist in lower fuel consumption.
    •     
  • Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
    •     
  • Cat Grade (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.


  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN – TRACTOR
    • Cat® C18
    • Compression engine brake
    • Electric start, 24V
    • Air cleaner, dry type with precleaner
    • Fan, hydraulic
    • Ground level engine shutdown
    • Radiator, aluminum unit core, 9 fins per inch
    • Guard, crankcase
    • Starting aid, ether
    • Braking system:
      • Primary and secondary, wet disc, hydraulic
      • Parking, hydraulic-released, spring-applied
      • Throttle lock
    • Transmission:
      • 8-speed planetary power shift
      • ECPC control
      • APECS software
      • Programmable top gear selection
      • Transmission hold
      • Differential lock
      • Guard, power train
      • Standard tire spin reduction
      • Ground speed control
      • Machine speed limit
      • Differential lock protection
  • POWER TRAIN – SCRAPER
    • Braking system:
      • Primary and secondary, dry caliper, hydraulic actuated
  • ELECTRICAL – TRACTOR
    • Alternator, 150 Amp
    • Batteries (4), 12V, 1,000 CCA, maintenance free, high output
    • Electrical system, 24V
    • Lighting system:
      • Headlights, LED
      • Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
    • Starting/charging receptacle
  • ELECTRICAL – SCRAPER
    • Alarm, backup
    • Lighting system:
      • Brake lights, LED
      • Turn signals with hazard function, LED
  • OPERATOR ENVIRONMENT – TRACTOR
    • HVAC system, heat, AC, defrost
    • Thermostat control of HVAC system
    • Coat hook
    • Lunchbox platform with holding strap
    • Diagnostic connection (2)
    • 12V power ports (2)
    • Differential lock (1)
    • Dome courtesy light
    • Horn, electric
    • T-Handle implement control
    • Mirror, rearview
    • Radio ready
    • ROPS/FOPS cab, pressurized
    • Keypad switches:
      • Throttle lock
      • Wipers/washers
      • Hazard lights
      • Retarding level select
      • Work lights on, off
      • Information mode on Messenger Display
    • Safety tab rocker switches
    • Seat belt, static two-piece
    • Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
    • Steering wheel, tilt, telescoping, padded
    • Windows, right side emergency egress
    • Windows, sliding
    • Windows, laminated, zipped in
    • Windshield wipers, front and rear windows, includes washers
    • Door lock
    • Messenger Display
    • Gauges, warnings include:
      • Coolant temperature
      • Engine oil temperature
      • Hydraulic oil temperature
      • Diesel Particulate Filter (DPF) temperature
      • Fuel level
      • Park brake
      • Implement lockout
      • Brake system
      • Regeneration required
      • Throttle lock
      • System voltage
      • Secondary steering
      • Bail down
      • Ejector auto
      • Differential lock
      • Apron float
      • Transmission hold
      • Cushion hitch
      • High beam lights
      • Action lamp
      • Engine speed, rpm
      • Gear selection
      • DEF fill levels
  • FLUIDS
    • Extended Life Coolant to –37° C (–34° F)
  • OTHER STANDARD EQUIPMENT – TRACTOR
    • Advanced cushion hitch
    • Accumulators (cushion hitch) with Canadian Registration Number (CRN)
    • Fast oil change
    • Fenders, non-metallic
    • Heater, engine coolant 120V
    • Rims (2)
    • Tow hooks, front
    • Vandalism locks
    • Heater, engine coolant 120V
    • Steering locks
  • OTHER STANDARD EQUIPMENT – SCRAPER
    • Bowl:
      • 18.3 m3 (24 yd3), struck
      • 26 m3 (34 yd3), heaped
    • Vandalism locks
    • Rims (2)
    • Hydraulic position sensing cylinders (bowl lift and apron)

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • STEERING ARRANGEMENTS
    • Secondary Steering Arrangement
  • INTEGRATED TECHNOLOGIES
    • Sequence Assist Arrangement with Payload Estimator
    • Load Assist
    • Cat Grade Control with Load Assist
    • Advanced Tire Spin Reduction
  • OTHER ATTACHMENTS
    • Camera arrangement – Work Area Vision System (WAVS)
    • Cab beacon
    • Air horn
    • Air horn and beacon
    • Fender, scraper
    • Guard, overflow
    • Wiring group
    • Push Pull
  • SERVICE INSTRUCTIONS
    • Film arrangement – U.S. (ANSI)
    • Film arrangement – International (ISO)

Specs

Overview

Long Name:
631 Wheel Tractor-Scraper
Name:
631
Brand:
Caterpillar
Status:
Current

Engine

Emissions
Cat® C18 engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model - Tractor
Cat® C18
Rated Engine RPM - Tractor
1900 r/min / 1900 r/min
Flywheel Power - Tractor
570 hp / 425 kW

General

Overall Width
12.11 ft / 3.94 m
Overall Shipping Height
12.9 ft / 3.89 m
Scraper Capacity - Struck
24 yd³ / 18.3 m³
Scraper Capacity - Heaped
34 yd³ / 26 m³
Rated Load
37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)
Width - Cut
17.7 ft / 3.51 m
Maximum Depth of Cut
12.4 in / 450 mm
Maximum Depth of Spread
21.1 in / 535 mm
Top Speed - Loaded
34.7 mile/h / 55.8 km/h
180° Curb-to-Curb Turning Width
40.12 ft / 12.23 m
Tires - Scraper
37.25R35**E3
Tires - Tractor
37.25R35**E3

Tractor Engine

Flywheel Power - Tractor/Scraper
570 hp / 425 kW

Scraper Bowl

Scraper Capacity - Heaped
34 yd³ / 26 m³

Transmission

Top Speed - Loaded
34.7 mile/h / 55.8 km/h

Travel Speeds - Runout

Transmission Gear - First
3.4 mile/h / 5.5 km/h
Transmission Gear - Second
6.2 mile/h / 10 km/h
Transmission Gear - Third
7.7 mile/h / 12.4 km/h
Transmission Gear - Fourth
10.5 mile/h / 16.9 km/h
Transmission Gear - Fifth
14.1 mile/h / 22.7 km/h
Transmission Gear - Sixth
19 mile/h / 30.6 km/h
Transmission Gear - Seventh
25.7 mile/h / 41.4 km/h
Transmission Gear - Eighth
34.7 mile/h / 55.8 km/h
Transmission Gear - Reverse
6.2 mile/h / 9.9 km/h

Service Refill Capacities

Real Wheels (Each)
2.37 gal (US) / 9 l
Crankcase - Tractor
13.7 gal (US) / 52 l
Transmission System
29 gal (US) / 110 l
Cooling System
18.75 gal (US) / 71 l
Fuel Tank
231 gal (US) / 874 l
Hydraulic System
37.5 gal (US) / 142 l
Diesel Exhaust Fluid (DEF)
8 gal (US) / 30.5 l

Service Refill Capacities - Tractor

Windshield Washer Reservoir
1.3 gal (US) / 5 l
Differential
40.41 gal (US) / 153 l

Service Refill Capacities - Scraper

Final Drive - Each
8.71 gal (US) / 33 l

Dimensions

Width - Overall Machine
155 in / 3937 mm
Width - Overall Machine - Ladder Down
159.3 in / 4045 mm
Width - Tractor
144.2 in / 3662 mm
Width - Rear Tire Centers
96.9 in / 2462 mm
Width - Inside of Bowl
134 in / 3404 mm
Width - Outside Bowl - Shipping Width
143.1 in / 3635 mm
Height - Overall Shipping
153.2 in / 3892 mm
Height - Top of Cab
149.8 in / 3805 mm
Front of Tractor to Front Axle
142 in / 3608 mm
Ground Clearance - Tractor
26.1 in / 664 mm
Axle to Vertical Hitch Pin
20 in / 509 mm
Height - Scraper Blade Maximum
20 in / 510 mm
Wheel Base
346.8 in / 8808 mm
Length - Overall Machine - Standard
596.8 in / 15160 mm
Length - Maximum (Push-Pull)
655.2 in / 16643 mm
Rear Axle - Rear of Machine
108 in / 2744 mm

Non Push-Pull

Overall Length
49.34 ft / 15.04 m
Operating Weight - Empty
102750 lb / 46600 kg

Push-Pull

Operating Weight - Empty
106430 lb / 48275 kg
Overall Length - With Bail Down
54.59 ft / 16.64 m

Cab

Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).
ROPS/FOPS
ROPS/FOPS meet “ISO Standards.”

Safety Criteria Compliance Standards

Steering System
ISO 5010:2007
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)
Seat Belt
SAE J386:FEB2006
Reverse Alarm
ISO 9533:2010
Brakes
ISO 3450:2011

Implement Cycle Times

Bowl Raise
3.5 s / 3.5 s
Bowl Lower
3.5 s / 3.5 s
Apron Raise
4 s / 4 s
Apron Lower
3.8 s / 3.8 s
Ejector Extend
8.5 s / 8.5 s
Ejector Retract
8.5 s / 8.5 s
Bail Raise
1.5 s / 1.5 s
Bail Lower
2.1 s / 2.1 s

Dimensions

Width - Outside Rear Tires
143.2 in / 3636 mm

General

Fuel Tank Refill Capacity - Scraper
231 gal (US) / 874 l

SEE HOW 631 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Open Bowl Scrapers
631
631 Open Bowl Scraper
Brand
Caterpillar
Status
Current
Engine Model - Tractor
Cat® C18
Rated Engine RPM - Tractor
1900 r/min / 1900 r/min
Flywheel Power - Tractor
570 hp / 425 kW
Overall Width
12.11 ft / 3.94 m
Overall Shipping Height
12.9 ft / 3.89 m
Scraper Capacity - Struck
24 yd³ / 18.3 m³
Scraper Capacity - Heaped
34 yd³ / 26 m³
Rated Load
37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)
Width - Cut
17.7 ft / 3.51 m
Maximum Depth of Cut
12.4 in / 450 mm
Maximum Depth of Spread
21.1 in / 535 mm
Top Speed - Loaded
34.7 mile/h / 55.8 km/h
180° Curb-to-Curb Turning Width
40.12 ft / 12.23 m
Tires - Scraper
37.25R35**E3
Flywheel Power - Tractor/Scraper
570 hp / 425 kW
Transmission Gear - First
3.4 mile/h / 5.5 km/h
Transmission Gear - Second
6.2 mile/h / 10 km/h
Transmission Gear - Third
7.7 mile/h / 12.4 km/h
Transmission Gear - Fourth
10.5 mile/h / 16.9 km/h
Transmission Gear - Fifth
14.1 mile/h / 22.7 km/h
Transmission Gear - Sixth
19 mile/h / 30.6 km/h
Transmission Gear - Seventh
25.7 mile/h / 41.4 km/h
Transmission Gear - Eighth
34.7 mile/h / 55.8 km/h
Transmission Gear - Reverse
6.2 mile/h / 9.9 km/h
Crankcase - Tractor
13.7 gal (US) / 52 l
Fuel Tank
231 gal (US) / 874 l
Hydraulic System
37.5 gal (US) / 142 l
Differential
40.41 gal (US) / 153 l
Final Drive - Each
8.71 gal (US) / 33 l
Width - Overall Machine
155 in / 3937 mm
Width - Overall Machine - Ladder Down
159.3 in / 4045 mm
Width - Tractor
144.2 in / 3662 mm
Width - Rear Tire Centers
96.9 in / 2462 mm
Width - Inside of Bowl
134 in / 3404 mm
Height - Overall Shipping
153.2 in / 3892 mm
Height - Top of Cab
149.8 in / 3805 mm
Front of Tractor to Front Axle
142 in / 3608 mm
Ground Clearance - Tractor
26.1 in / 664 mm
Axle to Vertical Hitch Pin
20 in / 509 mm
Height - Scraper Blade Maximum
20 in / 510 mm
Wheel Base
346.8 in / 8808 mm
Length - Overall Machine - Standard
596.8 in / 15160 mm
Length - Maximum (Push-Pull)
655.2 in / 16643 mm
Rear Axle - Rear of Machine
108 in / 2744 mm
Overall Length
49.34 ft / 15.04 m
Operating Weight - Empty
106430 lb / 48275 kg
Overall Length - With Bail Down
54.59 ft / 16.64 m
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).
ROPS/FOPS
ROPS/FOPS meet “ISO Standards.”
Steering System
ISO 5010:2007
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)
Seat Belt
SAE J386:FEB2006
Reverse Alarm
ISO 9533:2010
Brakes
ISO 3450:2011
Bowl Raise
3.5 s / 3.5 s
Bowl Lower
3.5 s / 3.5 s
Apron Raise
4 s / 4 s
Apron Lower
3.8 s / 3.8 s
Ejector Extend
8.5 s / 8.5 s
Ejector Retract
8.5 s / 8.5 s
Bail Raise
1.5 s / 1.5 s
Bail Lower
2.1 s / 2.1 s
Width - Outside Rear Tires
143.2 in / 3636 mm
Fuel Tank Refill Capacity - Scraper
231 gal (US) / 874 l
Selected Model
Open Bowl Scrapers
627
627 Open Bowl Scraper
Brand
Caterpillar
Status
Current
Engine Model - Tractor
Cat® C13
Rated Engine RPM - Tractor
2000 r/min / 2000 r/min
Flywheel Power - Tractor
407 hp / 304 kW
Overall Width
11.71 ft / 3.57 m
Overall Shipping Height
13.22 ft / 4.03 m
Scraper Capacity - Struck
17.1 yd³ / 13 m³
Scraper Capacity - Heaped
24 yd³ / 18.4 m³
Rated Load
26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
Width - Cut
10.3 ft / 3.14 m
Maximum Depth of Cut
12.4 in / 315 mm
Maximum Depth of Spread
21.3 in / 540 mm
Top Speed - Loaded
33.5 mile/h / 53.9 km/h
180° Curb-to-Curb Turning Width
38.71 ft / 11.8 m
Tires - Scraper
33.25R29**E3
Flywheel Power - Tractor/Scraper
304 kW (407 hp)/216 kW (290 hp)
Transmission Gear - First
3.1 mile/h / 5 km/h
Transmission Gear - Second
5.5 mile/h / 8.9 km/h
Transmission Gear - Third
7.5 mile/h / 12.1 km/h
Transmission Gear - Fourth
10.1 mile/h / 16.3 km/h
Transmission Gear - Fifth
13.6 mile/h / 21.9 km/h
Transmission Gear - Sixth
18.4 mile/h / 29.6 km/h
Transmission Gear - Seventh
24.8 mile/h / 39.9 km/h
Transmission Gear - Eighth
33.5 mile/h / 53.9 km/h
Transmission Gear - Reverse
5.7 mile/h / 9.2 km/h
Crankcase - Tractor
8.08 gal (US) / 30.58 l
Fuel Tank
336.03 gal (US) / 1272 l
Hydraulic System
21.926 gal (US) / 83 l
Differential
8.98 gal (US) / 34 l
Final Drive - Each
5 gal (US) / 19 l
Width - Overall Machine
141.1 in / 3585 mm
Width - Overall Machine - Ladder Down
149.2 in / 3790 mm
Width - Tractor
133.1 in / 3381 mm
Width - Rear Tire Centers
90.2 in / 2290 mm
Width - Inside of Bowl
120 in / 3048 mm
Height - Overall Shipping
158.6 in / 4029 mm
Height - Top of Cab
142.6 in / 3621 mm
Front of Tractor to Front Axle
122.8 in / 3119 mm
Ground Clearance - Tractor
21.9 in / 557 mm
Axle to Vertical Hitch Pin
21.3 in / 540 mm
Height - Scraper Blade Maximum
20.5 in / 520 mm
Wheel Base
314.9 in / 7998 mm
Length - Overall Machine - Standard
551.8 in / 14015 mm
Length - Maximum (Push-Pull)
613.2 in / 15576 mm
Rear Axle - Rear of Machine
114.1 in / 2898 mm
Overall Length
45.9 ft / 14.02 m
Operating Weight - Empty
92980 lb / 42168 kg
Overall Length - With Bail Down
51.1 ft / 15.58 m
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 119 dB(A).
ROPS/FOPS
Meets ISO standards
Steering System
ISO 5010:2007
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Seat Belt
SAE J386:JUN1985
Reverse Alarm
ISO 9533:2010
Brakes
ISO 3450:2011
Bowl Raise
3 s / 3 s
Bowl Lower
3.5 s / 3.5 s
Apron Raise
2.95 s / 2.95 s
Apron Lower
3.8 s / 3.8 s
Ejector Extend
5.2 s / 5.2 s
Ejector Retract
6.7 s / 6.7 s
Bail Raise
1.8 s / 1.8 s
Bail Lower
3.2 s / 3.2 s
Width - Outside Rear Tires
128.9 in / 3275 mm
Fuel Tank Refill Capacity - Scraper
336 gal (US) / 1272 l
More Details
Open Bowl Scrapers
631 – Tier 2
631 Open Bowl Scraper
Brand
Caterpillar
Status
Current
Engine Model - Tractor
Cat® C18
Rated Engine RPM - Tractor
1900 r/min / 1900 r/min
Flywheel Power - Tractor
570 hp / 425 kW
Overall Width
12.93 ft / 3.94 m
Overall Shipping Height
12.75 ft / 3.89 m
Scraper Capacity - Struck
24 yd³ / 18.3 m³
Scraper Capacity - Heaped
34 yd³ / 26 m³
Rated Load
37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)
Width - Cut
11.5 ft / 3.51 m
Maximum Depth of Cut
17.7 in / 450 mm
Maximum Depth of Spread
21.1 in / 535 mm
Top Speed - Loaded
34.7 mile/h / 55.8 km/h
180° Curb-to-Curb Turning Width
40.12 ft / 12.23 m
Tires - Scraper
37.25R35**E3
Flywheel Power - Tractor/Scraper
570 hp / 425 kW
Transmission Gear - First
3.4 mile/h / 5.5 km/h
Transmission Gear - Second
6.2 mile/h / 10 km/h
Transmission Gear - Third
7.7 mile/h / 12.4 km/h
Transmission Gear - Fourth
10.5 mile/h / 16.9 km/h
Transmission Gear - Fifth
14.1 mile/h / 22.7 km/h
Transmission Gear - Sixth
19 mile/h / 30.6 km/h
Transmission Gear - Seventh
25.7 mile/h / 41.4 km/h
Transmission Gear - Eighth
34.7 mile/h / 55.8 km/h
Transmission Gear - Reverse
6.2 mile/h / 9.9 km/h
Crankcase - Tractor
13.7 gal (US) / 52 l
Fuel Tank
231 gal (US) / 874 l
Hydraulic System
37.5 gal (US) / 142 l
Differential
40.41 gal (US) / 153 l
Final Drive - Each
8.71 gal (US) / 33 l
Width - Overall Machine
155 in / 3937 mm
Width - Overall Machine - Ladder Down
159.3 in / 4045 mm
Width - Tractor
144.2 in / 3662 mm
Width - Rear Tire Centers
96.9 in / 2462 mm
Width - Inside of Bowl
134 in / 3404 mm
Height - Overall Shipping
153.2 in / 3892 mm
Height - Top of Cab
149.8 in / 3805 mm
Front of Tractor to Front Axle
142 in / 3608 mm
Ground Clearance - Tractor
26.1 in / 664 mm
Axle to Vertical Hitch Pin
20 in / 509 mm
Height - Scraper Blade Maximum
20 in / 510 mm
Wheel Base
346.8 in / 8808 mm
Length - Overall Machine - Standard
597 in / 15164 mm
Length - Maximum (Push-Pull)
655.1 in / 16640 mm
Rear Axle - Rear of Machine
108 in / 2744 mm
Overall Length
49.34 ft / 15.04 m
Operating Weight - Empty
106430 lb / 48275 kg
Overall Length - With Bail Down
54.59 ft / 16.64 m
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).
ROPS/FOPS
ROPS/FOPS meet “ISO Standards.”
Steering System
ISO 5010:2007
Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II
Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)
Seat Belt
SAE J386:FEB2006
Reverse Alarm
ISO 9533:2010
Brakes
Brakes ISO 3450:2011
Bowl Raise
3.5 s / 3.5 s
Bowl Lower
3.5 s / 3.5 s
Apron Raise
4 s / 4 s
Apron Lower
3.8 s / 3.8 s
Ejector Extend
8.5 s / 8.5 s
Ejector Retract
8.5 s / 8.5 s
Bail Raise
1.5 s / 1.5 s
Bail Lower
2.1 s / 2.1 s
Width - Outside Rear Tires
143.2 in / 3636 mm
Fuel Tank Refill Capacity - Scraper
231 gal (US) / 874 l
More Details