1438 mm (57 in)

1438 mm (57 in) Heavy Duty Fork Carriage

Studio Shot

DESCRIPTION

Heavy duty fork carriages are used for moving palletized loads on construction sites, handling bagged fertilizer and seed at landscaping and nursery sites.Cat® Heavy Duty Fork Carriages for are designed to meet a wide variety of material handling needs that are above what standard duty fork carriages can handle. Use carriages with different length fork tines for moving bulky or palletized materials on construction and industrial sites, handling bagged fertilizer and seed at landscaping and nursery sites.

Heavy Duty Design and High Backs

This heavy duty carriage was specially designed to deliver performance at construction sites, moving palletized and large materials around. The high backs and good visibility through the frame make it happen.

Swinging Forks Capability

In some operations, swinging forks helps to pick materials out of the ground. This carriage offers this option by just removing the lower bar and placing at the special storage located at the bottom of the carriage.

Adjustable Fork Positions

Adjust the fork position a total of 855 mm (33.7 in) from one side to the other with increments of 55 mm (2.2 in) and lock them to prevent non-expected movements.

Positioning Lever

Use the included red lever located at the right rear storage area to move your forks with safety and convenience.

  • Specs
  • Docs

Specs

Overview

Long Name:
1438 mm (57 in) Heavy Duty Fork Carriage
Name:
1438 mm (57 in)
Brand:
Caterpillar
Status:
Current
Height
35.8 in / 910 mm
Width
56.6 in / 1438 mm
Weight
319.7 lb / 145 kg
Length
10.9 in / 277 mm
Tine Spacing Range
414-1266 mm (16-50 in)
Tine Spacing Range - Outside Width
414-1266 mm (16-50 in)
Interface Type
Skid Steer Coupler