301.7 CR

301.7 CR Mini Hydraulic Excavator

The Cat 301.7 CR Mini Excavator delivers high performance in an under 2-ton compact size machine for construction, landscaping and demolition jobs.

301.7 CR Mini Hydraulic Excavator

DESCRIPTION

The Cat® 301.7 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.The Cat® 301.7 CR Mini Excavator delivers power and performance in a compact size to help you work in a wide range of applications.

ALL DAY COMFORT

  • Adjustable wrist rests and a suspension seat option help keep you working comfortably all day long.

301.7 CR Mini Excavator
301.7 CR Mini Excavator

EASY TO OPERATE

  • Controls are easy to use and the intuitive Next Generation LCD monitor provides easy to read machine information.

STICK STEER TRAVEL MODE

  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!

301.7 CR Mini Excavator
301.7 CR Mini Excavator

BIG PERFORMANCE IN A COMPACT DESIGN

  • Strong lift and dig performance helps you get the job done faster. The compact radius design and retractable undercarriage lets you access and work in the tightest areas. Dig-to-blade and dozer float features allow for easy clean up.

SAFETY ON THE JOB SITE

  • Your safety is our top priority. The Cat mini excavator is designed to help keep you safe on the job. Courtesy work lights and a fluorescent retractable seat belt with optional seat belt reminder system are just a couple of the safety features we've built into the machine.

301.7 CR Mini Excavator
301.7 CR Mini Excavator

SIMPLE SERVICE FOR LESS DOWNTIME

  • Maintenance is quick and easy on the Cat mini excavator. Routine check points are easy to access at ground level through the side doors. The unique tilt up canopy lets you reach additional service areas when needed.

LOWER OPERATING COSTS

  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat mini excavator was designed with reducing your operating costs in mind.

301.7 CR Mini Excavator
301.7 CR Mini Excavator

SUSTAINABILITY

  • The Cat® C1.1 engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
  • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • ENGINE
    • Cat C1.1 Engine (U.S. EPA Tier 4 Final/EU Stage V)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Two Speed Travel
    • Fuel Water Separator
    • Power on Demand (not available in all regions)
    • Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
  • HYDRAULICS
    • Smart Tech Electronic Pump
    • Accumulator
    • Automatic Swing Brake
    • Auxiliary Hydraulic Lines
    • One and Two Way Auxiliary Flow
    • Continuous Auxiliary Flow
    • Auxiliary Line Quick Disconnects
  • OPERATOR ENVIRONMENT
    • Tilt-up Canopy
    • Top Guard ISO 10262:1998 Level I
    • ROPS – ISO 12117-2:2008
    • TOPS – ISO 12117:1997
    • Machine 2-Point Lifting
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer (optional in some regions)
    • Adjustable Wrist Rests
    • Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Machine Security
    • Machine Security – Standard Key with Pass Code
    • Vinyl Non-Suspension Seat
    • Hydraulic Lockout – All Controls
    • Retractable High Visibility Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • Storage Pocket
    • Skylight
    • Mounting Bosses for Front
    • Signaling/Warning Horn
    • Boom Light, Halogen
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Hour Meter with Wake Up Switch
  • UNDERCARRIAGE
    • Expandable Undercarriage
    • Rubber Belt (230 mm/9 in wide)
    • Dozer Blade
    • Dozer Blade Float
    • Hydraulic Track Adjusters
    • Tie Downs on Track Frame
  • BOOM, STICK AND LINKAGES
    • One Piece Boom (1780 mm/70 in)
    • Standard Stick (960 mm/37.8 in)
    • Front Shovel Capable
    • Front Shovel Capable – Pin-On
    • Thumb Ready (not available in all regions)
    • Certified Lifting Eye (optional in some regions)
  • ELECTRICAL
    • 12 Volt Battery
    • Software (machine and monitor)
    • Maintenance Free Battery
    • Signaling/Warning Horn
    • 12 Volt Power Socket

Optional Equipment

  • OPERATOR ENVIRONMENT
    • Control Pattern Changer (optional in some regions)
    • No Travel Pedals and Hand Levers
    • Machine Security – Push to Start with Key Fob/Pass Code
    • Vinyl Suspension Seat
    • LED Front Lights
    • LED Front and Rear Lights
    • LED Boom Light
    • Mirrors Left and Right
    • Seat Belt Reminder System
  • UNDERCARRIAGE
    • Steel Track (230 mm/9 in wide)
  • BOOM, STICK AND LINKAGES
    • Long Stick (1160 mm/45.7 in)
    • Front Shovel Capable – Dual Lock Manual Coupler
    • Attachments including Couplers, Thumbs, Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Hydraulic Quick Coupler Lines (not available in all regions)
  • ELECTRICAL
    • Battery Disconnect
    • Product Link PL243 (regulations apply)
    • Product Link PLE643 (regulations apply)
    • Travel Alarm (standard in some regions)
  • GUARDING
    • Polycarbonate Front Guard (ISO 10262 1998 Level I and EN356 PSA)
    • Polycarbonate Half Height Front Guard (Canopy only)
  • OTHER
    • Bio Oil Capable
    • Eco Drain
    • Water Jacket Heater
    • Heavy Counterweight

Specs

Overview

Long Name:
301.7 CR Mini Hydraulic Excavator
Name:
301.7 CR
Brand:
Caterpillar
Status:
Current

Engine

Net Power
21 HP / 15.7 kW

Weights

Operating Weight
4222 lb / 1915 kg

Dimensions - Long Stick

Dig Depth
100 in / 2540 mm

Engine

Engine Model
C1.1

Blade

Height
8.9 in / 225 mm

Dimensions - Long Stick

Tail Swing
25.6 in / 650 mm

Engine

Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Dimensions - Long Stick

O/A Shipping Height
90.6 in / 2300 mm

Hydraulic System

Operating Pressure - Equipment
3553.4 psi / 245 bar

Engine

Bore
3 in / 77 mm

Dimensions - Long Stick

Maximum Blade Height
10.6 in / 270 mm

Dimensions - Standard Stick

Track Belt/Shoe Width
9.1 in / 230 mm

Dimensions - Long Stick

Minimum Ground Clearance Below Undercarriage
5.5 in / 140 mm

Blade

Note
*Expanded – 1300 mm (51 in)

Weights

Minimum Operating Weight with Canopy*
3946 lb / 1790 kg

Dimensions - Standard Stick

Overall Shipping Length*
142.5 in / 3620 mm
Track Width - Expanded
51.18 in / 1300 mm

Hydraulic System

Operating Pressure - Swing
2132.1 psi / 147 bar

Dimensions - Long Stick

O/A Undercarriage Length
62.6 in / 1590 mm

Dimensions - Standard Stick

O/A Undercarriage Length
62.6 in / 1590 mm

Dimensions - Long Stick

Boom Height - Shipping Position
40.9 in / 1040 mm

Travel System

Maximum Traction Force - High Speed
2675.2 lbf / 11.9 kN

Dimensions - Long Stick

Maximum Dump Clearance
98.8 in / 2510 mm

Hydraulic System

Digging Force - Stick - Standard
2135.7 lbf / 9.5 kN

Service Refill Capacities

Engine Oil
1.2 gal (US) / 4.4 l

Weights

Maximum Operating Weight with Canopy**
4222 lb / 1915 kg

Dimensions - Long Stick

Track Belt/Shoe Width
9.1 in / 230 mm
Maximum Dig Height
137.4 in / 3490 mm

Travel System

Travel Speed - High
2.7 mile/h / 4.4 km/h

Hydraulic System

Pump Flow at 2,400 rpm
17.4 gal/min / 66 l/min

Dimensions - Long Stick

Track Width - Expanded
51.18 in / 1300 mm

Dimensions - Standard Stick

Maximum Reach - Ground Level
153.5 in / 3900 mm
Boom Height - Shipping Position
42.9 in / 1090 mm
Boom Swing - Left
65 ° / 65 °
Maximum Reach
156.3 in / 3970 mm

Dimensions - Long Stick

Maximum Reach - Ground Level
159.8 in / 4060 mm
Swing Bearing - Height
17.4 in / 442 mm

Hydraulic System

Auxiliary Circuit - Primary - Pressure
3553.4 psi / 245 bar

Service Refill Capacities

Hydraulic Tank
4.8 gal (US) / 18 l

Dimensions - Long Stick

Boom Swing - Left
65 ° / 65 °

Dimensions - Standard Stick

Maximum Blade Depth
10.4 in / 265 mm

Dimensions - Long Stick

Stick Length
45.7 in / 1160 mm

Dimensions - Standard Stick

Dig Depth
92.5 in / 2350 mm
Maximum Dump Clearance
96.5 in / 2450 mm

Travel System

Ground Pressure - Maximum Weight
4.4 psi / 30 kPa

Hydraulic System

Digging Force - Bucket
3641.9 lbf / 16.2 kN

Sound

Average Exterior Sound Pressure (ISO 6395:2008)
93 dB(A) / 93 dB(A)

Dimensions - Standard Stick

Maximum Blade Height
10.6 in / 270 mm

Travel System

Travel Speed - Low
1.8 mile/h / 2.9 km/h

Weight Increase from Minimum Configuration

Steel Tracks
110 lb / 50 kg

Hydraulic System

Auxiliary Circuit - Secondary - Pressure
3553.4 psi / 245 bar

Dimensions - Standard Stick

Tail Swing
25.6 in / 650 mm

Weight Increase from Minimum Configuration

Long Stick
22 lb / 10 kg

Dimensions - Standard Stick

Boom In Reach
64.2 in / 1630 mm

Swing System

Machine Swing Speed
9.8 r/min / 9.8 r/min

Dimensions - Long Stick

Vertical Wall
74.4 in / 1890 mm

Engine

Stroke
3.2 in / 81 mm

Certification - Canopy

Roll Over Protective Structure (ROPS)
ISO 12117-2:2008

Dimensions - Standard Stick

Minimum Ground Clearance Below Undercarriage
5.5 in / 140 mm

Service Refill Capacities

Fuel Tank
5.8 gal (US) / 22 l

Hydraulic System

Operating Pressure - Travel
3553.4 psi / 245 bar

Dimensions - Standard Stick

O/A Shipping Height
90.6 in / 2300 mm

Dimensions - Long Stick

Track Width - Retracted
39 in / 990 mm

Hydraulic System

Type
Load Sensing Hydraulics with Variable Displacement Piston Pump

Dimensions - Long Stick

Boom Swing - Right
50 ° / 50 °
Note
*Overall Shipping Length depends on blade position during shipment.

Certification - Canopy

Top Guard
ISO 10262:1998 (Level I)

Dimensions - Long Stick

Maximum Reach
162.6 in / 4130 mm
Boom In Reach
63.8 in / 1620 mm

Service Refill Capacities

Cooling System
1 gal (US) / 3.9 l

Hydraulic System

Auxiliary Circuit - Secondary - Flow
3.7 gal/min / 14 l/min

Travel System

Maximum Traction Force - Low Speed
4136.5 lbf / 18.4 kN

Hydraulic System

Auxiliary Circuit - Primary - Flow
8.7 gal/min / 33 l/min

Engine

Displacement
69 in³ / 1.1 l
Note
Net power advertised is the power available at the flywheel when the engine is at rated speed and rated power when the engine is installed with the factory configured fan, air intake system, exhaust system, and alternator with a minimum alternator load.

Dimensions - Standard Stick

Swing Bearing - Height
17.4 in / 442 mm

Blade

Width*
39 in / 990 mm

Dimensions - Long Stick

Overall Shipping Length*
141.3 in / 3590 mm

Dimensions - Standard Stick

Stick Length
37.8 in / 960 mm
Vertical Wall
70.9 in / 1800 mm

Travel System

Gradeability - Maximum
30 degrees

Dimensions - Standard Stick

Boom Swing - Right
50 ° / 50 °

Service Refill Capacities

Hydraulic System
6.9 gal (US) / 26 l

Sound

Note
European Union Directive “2000/14/EC”

Engine

Note (1)
Advertised power is tested per the specified standard in effect at the time of manufacture.

Weights

Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.

Hydraulic System

Digging Force - Stick - Long
1865.9 lbf / 8.3 kN

Dimensions - Standard Stick

Track Width - Retracted
39 in / 990 mm
Maximum Dig Height
135 in / 3430 mm

Travel System

Ground Pressure - Minimum Weight
4 psi / 27.9 kPa

Dimensions - Standard Stick

Note
*Overall Shipping Length depends on blade position during shipment.

Dimensions - Long Stick

Maximum Blade Depth
10.4 in / 265 mm

Weights

Note (1)
*Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank.

Certification - Canopy

Tip Over Protective Structure (TOPS)
ISO 12117:1997

Weight Increase from Minimum Configuration

Expandable Undercarriage
Standard
Heavy Counterweight
148 lb / 67 kg

Weights

Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
EU: CE Plate Weight***
4167 lb / 1890 kg

Sustainability

Recyclability
95%

Engine

Engine Power
21.6 HP / 16.1 kW

SEE HOW 301.7 CR COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Mini Excavators
301.7 CR
301.7 CR Mini Hydraulic Excavator
Brand
Caterpillar
Status
Current
Net Power
21 HP / 15.7 kW
Operating Weight
4222 lb / 1915 kg
Dig Depth
92.5 in / 2350 mm
Engine Model
C1.1
Height
8.9 in / 225 mm
Tail Swing
25.6 in / 650 mm
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
O/A Shipping Height
90.6 in / 2300 mm
Operating Pressure - Equipment
3553.4 psi / 245 bar
Bore
3 in / 77 mm
Maximum Blade Height
10.6 in / 270 mm
Track Belt/Shoe Width
9.1 in / 230 mm
Minimum Ground Clearance Below Undercarriage
5.5 in / 140 mm
Note
*Overall Shipping Length depends on blade position during shipment.
Minimum Operating Weight with Canopy*
3946 lb / 1790 kg
Overall Shipping Length*
141.3 in / 3590 mm
Track Width - Expanded
51.18 in / 1300 mm
Operating Pressure - Swing
2132.1 psi / 147 bar
O/A Undercarriage Length
62.6 in / 1590 mm
Boom Height - Shipping Position
42.9 in / 1090 mm
Maximum Traction Force - High Speed
2675.2 lbf / 11.9 kN
Maximum Dump Clearance
96.5 in / 2450 mm
Digging Force - Stick - Standard
2135.7 lbf / 9.5 kN
Engine Oil
1.2 gal (US) / 4.4 l
Maximum Operating Weight with Canopy**
4222 lb / 1915 kg
Maximum Dig Height
135 in / 3430 mm
Travel Speed - High
2.7 mile/h / 4.4 km/h
Pump Flow at 2,400 rpm
17.4 gal/min / 66 l/min
Maximum Reach - Ground Level
159.8 in / 4060 mm
Boom Swing - Left
65 ° / 65 °
Maximum Reach
162.6 in / 4130 mm
Swing Bearing - Height
17.4 in / 442 mm
Auxiliary Circuit - Primary - Pressure
3553.4 psi / 245 bar
Hydraulic Tank
4.8 gal (US) / 18 l
Maximum Blade Depth
10.4 in / 265 mm
Stick Length
37.8 in / 960 mm
Ground Pressure - Maximum Weight
4.4 psi / 30 kPa
Digging Force - Bucket
3641.9 lbf / 16.2 kN
Average Exterior Sound Pressure (ISO 6395:2008)
93 dB(A) / 93 dB(A)
Travel Speed - Low
1.8 mile/h / 2.9 km/h
Steel Tracks
110 lb / 50 kg
Auxiliary Circuit - Secondary - Pressure
3553.4 psi / 245 bar
Long Stick
22 lb / 10 kg
Boom In Reach
63.8 in / 1620 mm
Machine Swing Speed
9.8 r/min / 9.8 r/min
Vertical Wall
70.9 in / 1800 mm
Stroke
3.2 in / 81 mm
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Fuel Tank
5.8 gal (US) / 22 l
Operating Pressure - Travel
3553.4 psi / 245 bar
Track Width - Retracted
39 in / 990 mm
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Boom Swing - Right
50 ° / 50 °
Top Guard
ISO 10262:1998 (Level I)
Cooling System
1 gal (US) / 3.9 l
Auxiliary Circuit - Secondary - Flow
3.7 gal/min / 14 l/min
Maximum Traction Force - Low Speed
4136.5 lbf / 18.4 kN
Auxiliary Circuit - Primary - Flow
8.7 gal/min / 33 l/min
Width*
39 in / 990 mm
Gradeability - Maximum
30 degrees
Hydraulic System
6.9 gal (US) / 26 l
Note (1)
*Minimum Weight is based on rubber tracks, operator, expandable undercarriage and full fuel tank.
Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Digging Force - Stick - Long
1865.9 lbf / 8.3 kN
Ground Pressure - Minimum Weight
4 psi / 27.9 kPa
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Expandable Undercarriage
Standard
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Recyclability
95%
Mini Excavators
301.5
301.5 Mini Hydraulic Excavator
Brand
Caterpillar
Status
Current
Net Power
21 HP / 15.7 kW
Operating Weight
3913 lb / 1775 kg
Dig Depth
92.1 in / 2340 mm
Engine Model
C1.1
Height
8.9 in / 225 mm
Tail Swing
32.3 in / 820 mm
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
O/A Shipping Height
90.9 in / 2310 mm
Operating Pressure - Equipment
3089.3 psi / 213 bar
Bore
3 in / 77 mm
Maximum Blade Height
10.8 in / 275 mm
Track Belt/Shoe Width
9.1 in / 230 mm
Minimum Ground Clearance Below Undercarriage
6.1 in / 155 mm
Note
European Union Directive “2000/14/EC”
Minimum Operating Weight with Canopy*
3483 lb / 1580 kg
Overall Shipping Length*
141.3 in / 3590 mm
Track Width - Expanded
51.18 in / 1300 mm
Operating Pressure - Swing
1493.9 psi / 103 bar
O/A Undercarriage Length
57.5 in / 1460 mm
Boom Height - Shipping Position
42.9 in / 1090 mm
Maximum Traction Force - High Speed
2315.5 lbf / 10.3 kN
Maximum Dump Clearance
98.8 in / 2510 mm
Digging Force - Stick - Standard
1843.4 lbf / 8.2 kN
Engine Oil
1.2 gal (US) / 4.4 l
Maximum Operating Weight with Canopy**
3913 lb / 1775 kg
Maximum Dig Height
135 in / 3430 mm
Travel Speed - High
2.7 mile/h / 4.4 km/h
Pump Flow at 2,400 rpm
17.4 gal/min / 66 l/min
Maximum Reach - Ground Level
153.1 in / 3890 mm
Boom Swing - Left
65 ° / 65 °
Maximum Reach
155.9 in / 3960 mm
Swing Bearing - Height
17.5 in / 445 mm
Auxiliary Circuit - Primary - Pressure
3089.3 psi / 213 bar
Hydraulic Tank
4.8 gal (US) / 18 l
Maximum Blade Depth
10.2 in / 260 mm
Stick Length
37.8 in / 960 mm
Ground Pressure - Maximum Weight
4.4 psi / 30.6 kPa
Digging Force - Bucket
3169.8 lbf / 14.1 kN
Average Exterior Sound Pressure (ISO 6395:2008)
93 dB(A) / 93 dB(A)
Travel Speed - Low
1.8 mile/h / 2.9 km/h
Steel Tracks
126 lb / 57 kg
Auxiliary Circuit - Secondary - Pressure
3089.3 psi / 213 bar
Long Stick
18 lb / 8 kg
Boom In Reach
57.5 in / 1460 mm
Machine Swing Speed
9.8 r/min / 9.8 r/min
Vertical Wall
74.4 in / 1890 mm
Stroke
3.2 in / 81 mm
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Fuel Tank
5.8 gal (US) / 22 l
Operating Pressure - Travel
3089.3 psi / 213 bar
Track Width - Retracted
39 in / 990 mm
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Boom Swing - Right
50 ° / 50 °
Top Guard
ISO 10262:1998 (Level I)
Cooling System
1 gal (US) / 3.9 l
Auxiliary Circuit - Secondary - Flow
3.7 gal/min / 14 l/min
Maximum Traction Force - Low Speed
3597 lbf / 16 kN
Auxiliary Circuit - Primary - Flow
8.7 gal/min / 33 l/min
Width*
39 in / 990 mm
Gradeability - Maximum
30 degrees
Hydraulic System
6.9 gal (US) / 26 l
Note (1)
Engine power is tested per ISO 14396:2002.
Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Digging Force - Stick - Long
1616.4 lbf / 7.2 kN
Ground Pressure - Minimum Weight
4 psi / 27.3 kPa
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Expandable Undercarriage
284 lb / 129 kg
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Recyclability
95%
Mini Excavators
301.8
301.8 Mini Hydraulic Excavator
Brand
Caterpillar
Status
Current
Net Power
21 HP / 15.7 kW
Operating Weight
4473 lb / 2029 kg
Dig Depth
93.3 in / 2370 mm
Engine Model
C1.1
Height
8.9 in / 225 mm
Tail Swing
39.2 in / 995 mm
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
O/A Shipping Height
90.6 in / 2300 mm
Operating Pressure - Equipment
3553.4 psi / 245 bar
Bore
3 in / 77 mm
Maximum Blade Height
10.6 in / 270 mm
Track Belt/Shoe Width
9.1 in / 230 mm
Minimum Ground Clearance Below Undercarriage
5.9 in / 150 mm
Note
European Union Directive “2000/14/EC”
Minimum Operating Weight with Canopy*
3803 lb / 1725 kg
Overall Shipping Length*
146.1 in / 3710 mm
Track Width - Expanded
51.18 in / 1300 mm
Operating Pressure - Swing
2132.1 psi / 147 bar
O/A Undercarriage Length
62.6 in / 1590 mm
Boom Height - Shipping Position
40.2 in / 1020 mm
Maximum Traction Force - High Speed
2675.2 lbf / 11.9 kN
Maximum Dump Clearance
100.8 in / 2560 mm
Digging Force - Stick - Standard
2540.3 lbf / 11.3 kN
Engine Oil
1.2 gal (US) / 4.4 l
Maximum Operating Weight with Canopy**
4211 lb / 1905 kg
Maximum Dig Height
142.5 in / 3620 mm
Travel Speed - High
2.7 mile/h / 4.4 km/h
Pump Flow at 2,400 rpm
17.4 gal/min / 66 l/min
Maximum Reach - Ground Level
155.9 in / 3960 mm
Boom Swing - Left
65 ° / 65 °
Maximum Reach
158.7 in / 4030 mm
Swing Bearing - Height
17.4 in / 442 mm
Auxiliary Circuit - Primary - Pressure
3553.4 psi / 245 bar
Hydraulic Tank
4.8 gal (US) / 18 l
Maximum Blade Depth
10.4 in / 265 mm
Stick Length
37.8 in / 960 mm
Ground Pressure - Maximum Weight
4.3 psi / 29.6 kPa
Digging Force - Bucket
4406.3 lbf / 19.6 kN
Average Exterior Sound Pressure (ISO 6395:2008)
93 dB(A) / 93 dB(A)
Travel Speed - Low
1.8 mile/h / 2.9 km/h
Steel Tracks
110 lb / 50 kg
Auxiliary Circuit - Secondary - Pressure
3553.4 psi / 245 bar
Long Stick
18 lb / 8 kg
Boom In Reach
55.9 in / 1420 mm
Machine Swing Speed
9.8 r/min / 9.8 r/min
Vertical Wall
72.8 in / 1850 mm
Stroke
3.2 in / 81 mm
Roll Over Protective Structure (ROPS)
ISO 12117-2:2008
Fuel Tank
6.9 gal (US) / 26 l
Operating Pressure - Travel
3553.4 psi / 245 bar
Track Width - Retracted
39 in / 990 mm
Type
Load Sensing Hydraulics with Variable Displacement Piston Pump
Boom Swing - Right
50 ° / 50 °
Top Guard
ISO 10262:1998 (Level I)
Cooling System
1 gal (US) / 3.9 l
Auxiliary Circuit - Secondary - Flow
3.7 gal/min / 14 l/min
Maximum Traction Force - Low Speed
4136.5 lbf / 18.4 kN
Auxiliary Circuit - Primary - Flow
8.7 gal/min / 33 l/min
Width*
39 in / 990 mm
Gradeability - Maximum
30 degrees
Hydraulic System
6.9 gal (US) / 26 l
Note (1)
*Minimum Weight is based on rubber tracks, operator, fixed undercarriage and full fuel tank.
Note (2)
**Maximum Weight is based on steel tracks, operator, expandable undercarriage and full fuel tank.
Digging Force - Stick - Long
2203.1 lbf / 9.8 kN
Ground Pressure - Minimum Weight
3.9 psi / 26.8 kPa
Tip Over Protective Structure (TOPS)
ISO 12117:1997
Expandable Undercarriage
271 lb / 123 kg
Note (3)
***CE Plate Weight is based on the most common EU configuration. Includes 75 kg (165 lb) operator and full fuel tank and excludes bucket.
Recyclability
95%