3512C
3512C High Displacement Marine Generator Set
DESCRIPTION
3512C High Displacement Marine Generator SetEmissions flexibility and capability
High power density
Improved reliability and durability
Medium speed BSFC and reliability in a high-speed product
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- AIR INLET SYSTEM
- Corrosion resistant separate circuit aftercooler core, regular duty air cleaners, dual turbochargers
- CONTROL SYSTEM
- Caterpillar A-III electronic engine control, Electronic Unit Injection fuel system, rigid wiring harness
- COOLING SYSTEM
- Auxiliary fresh water pump, centrifugal non-self-priming auxiliary sea water pump, gear driven centrifugal jacket water pump, expansion tank, engine oil cooler, thermostats and housing
- EXHAUST SYSTEM
- Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields, vertical exhaust outlet
- FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
- FUEL SYSTEM
- Fuel filter, RH, with service indicators
- Fuel transfer pump
- Electronically Controlled Unit Injectors
- INSTRUMENTATION
- Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
- LUBE SYSTEM
- Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
- MOUNTING SYSTEM
- Industrial type engine mounting rails)
- POWER TAKE-OFFS
- Accessory drive Lower RH, Lower LH Front housing, Two-sided
- PROTECTION SYSTEM
- A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
- Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
- GENERAL
- Vibration damper and guard Paint, Caterpillar Yellow engine with black rails. Lifting eyes
Optional Equipment
- AIR INLET SYSTEM
- Air Cleaner Removal
- Remote Air Inlet Adapters
- CHARGING SYSTEM
- Battery Chargers
- Charging Alternators
- CONTROL SYSTEM
- Load Sharing module
- Local speed throttle control
- COOLING SYSTEM
- Water level switch gauge
- Coolant level sensors
- Connections
- Keel Cooling Conversions
- Radiator cooling conversion
- Heat exchangers
- Auxiliary water pumps
- Sea water pump removal
- Air separator
- EXHAUST SYSTEM
- Exhaust outlet
- Flexible fittings
- Elbows
- Flanges
- Flange and exhaust expanders
- Mufflers
- FUEL SYSTEM
- Fuel Cooler
- Fuel priming pumps
- Flexible fuel lines
- Rigid Fuel Lines
- Primary fuel filter
- Fuel level switch
- GENERATORS AND GENERATOR ATTACHMENTS
- 1500/1800 RPM, 1000/1200 RPM
- Low Voltage Connection
- Generator Conversion
- Low Voltage Extension Box
- RFI Filter
- Bearing Temperature Detectors
- Manual Voltage Control
- Air Filter
- INSTRUMENTATION
- PL1000T Communication Module
- PL1000E Communication Module
- Customer Interface Box
- Thermocouples
- Remote panel display
- Remote cylinder temperature display
- LUBE SYSTEM
- Oil Pan
- Oil pan accessories
- Sump pumps
- Prelubrication Options
- Lubricating oil
- Centrifugal Oil Filter
- MOUNTING SYSTEM
- Vibration isolators
- Rails
- POWER TAKE-OFFS
- Flywheel guard
- Flexible coupling
- Coupling hub
- Front housing accessories
- Upper left hand front location
- Upper left hand rear location
- Upper right hand front location:
- Upper right hand rear location
- Lower left hand front location
- Front housing accessory drives
- Front power take-offs
- Crankshaft pulleys
- Damper guard removals
- PROTECTION SYSTEM
- Air inlet shutoffs
- Switches and contactors
- Explosion relief valve
- Sensors
- STARTING SYSTEM
- Starting motors or barring divice
- Air starting motors options
- Battery sets - 24 volt - Dry
- Battery rack
- Jacket Water Heater
- GENERAL
- Tool set
- Caterpillar datalink wire
- SVCE TOOLS/SHIP PROT/FACTORY SUPPORT
- Commissioning
Specs
Overview
Long Name:
3512C High Displacement Marine Generator Set
Name:
3512C
Brand:
Caterpillar
Status:
Current
Power Rating
Power Range
1550 - 1700 ekW
Generator Set Specifications
Frequency
60 hz
Speed
1800
Engine Specifications
Configuration
Vee 12 4-Stroke-Cycle Diesel
Aspiration
TTA
Bore
6.7 in / 170 mm
Stroke
8.46 in / 215 mm
Displacement
3574 in³ / 58.56 l
Generator Set Specifications
Minimum Rating
1550 eKW (1937 kVA)
Maximum Rating
1700 eKW (2125 kVA)
Generator Set Configurations
Emissions
IMO II
Generator Set Dimensions
Length
200.2 in / 5085.3 mm
Width
84.3 in / 2142.1 mm
Height
83.9 in / 2131.1 mm
Weight - Estimated
28136 lb / 12762 kg
SEE HOW 3512C COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Marine Generator Sets
3512C
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 1550 - 1700 ekW
- Frequency
- 60 hz
- Configuration
- Vee 12 4-Stroke-Cycle Diesel
- Aspiration
- TTA
- Bore
- 6.7 in / 170 mm
- Stroke
- 8.46 in / 215 mm
- Minimum Rating
- 1550 eKW (1937 kVA)
- Emissions
- IMO II
- Length
- 200.2 in / 5085.3 mm
- Width
- 84.3 in / 2142.1 mm
- Height
- 83.9 in / 2131.1 mm
Selected Model
Marine Generator Sets
C18
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 260 - 565 ekW
- Frequency
- 50 / 60
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Aspiration
- Turbocharged - Aftercooled
- Bore
- 5.7 in / 145 mm
- Stroke
- 7.2 in / 183 mm
- Minimum Rating
- 260 ekW (325 kVA)
- Emissions
- EPA Tier 3, IMO II, EU IWW, EU Stage V, China II
- Length
- 119.6 in / 3038 mm
- Width
- 55.6 in / 1411 mm
- Height
- 64.9 in / 1648 mm
Marine Generator Sets
C1.5
- Brand
- Caterpillar
- Status
- Current
- Power Range
- 10 - 12 ekW
- Frequency
- 50 / 60
- Configuration
- Inline 3, 4-Stroke Cycle diesel
- Aspiration
- Naturally Aspirated
- Bore
- 3.31 in / 84 mm
- Stroke
- 3.5 in / 90 mm
- Minimum Rating
- 10 ekW (10 kVA)
- Emissions
- U.S. EPA Tier 3
- Length
- 40.8 in / 1,038 mm (open) 43.1 in / 711 mm (enclosed)
- Width
- 21.1 in / 535 mm (open) 24.0 in / 608 mm (enclosed)
- Height
- 27.1 in / 535 mm (open) 27.9 in / 711 mm (enclosed)