3512C DGB

3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit

3512C HD Dry Manifold with ATAAC Petroleum Engine Well Servicing Engines

DESCRIPTION

Well stimulation operations in the oilfield are complex and demanding. The 3512C (HD) with dynamic gas blending engine for well stimulation operations was specifically developed to lower fuel cost while while meeting the highest standards in performance, durability, reliability, and emissions. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. 3512C (HD) engines, with ratings: 1678-1864 bkW (2250-2500 bhp) @ 1900 rpm meet IMO Tier II, U.S. EPA Marine Tier 2, and U.S. EPA Non-road Tier 2 equivalent emission standards. They are available using U.S. EPA and EU Flexibility, and for other regulated and non-regulated areas.

Engine Mounted Transmission Oil Cooler —

Integration with engine cooling system allows ease of installation and a tighter overall engine package

Advanced Digital Engine Management

ADEM A3 engine management system integrates speed control, air/fuel ratio control and ignition/detonation controls into a complete engine management system with integrated digital ignition, engine protection and monitoring

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time

Testing

Every engine is full-load tested to ensure proper engine performance

Product Support

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repair-before-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: • Internal engine component condition • Presence of unwanted fluids • Presence of combustion by-products • Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

- Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. • Cast engine blocks, heads, cylinder liners, front and flywheel housings • Machine critical components • Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

  • Standard Equipment
  • Optional Equipment
  • Specs

Standard Equipment

  • Air Inlet System
    • Air-to-air aftercooled (ATAAC) (512DW04, 512DW05, 512DW06, 512DW07)
    • Air cleaners (single element w/service indicator)
  • Control System
    • ADEM A3 ECU, LH
    • With electronic fuel injector fuel system (10 amp DC power required to drive electronic engine control module)
  • Cooling System
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Torque converter connections
    • Thermostats and housing, jacket water pump, gear-driven centrifugal (gear-driven centrifugal pumps)
    • Connections for radiator cooling
    • Dual outlets: 88.9 mm O.D. (3.5 in) elbow hose connections
  • Exhaust System
    • Land Well Service Engine:
    • Offshore Well Service Engine:
  • Flywheels & Flywheel Housing
    • Flywheel, SAE No. 0, 151 teeth
    • Flywheel housing, SAE No. 0
  • Fuel System
    • Primary fuel filter
    • Fuel priming pump
    • Fuel filter, RH spin-on type
    • Fuel transfer pump
    • Electronically controlled unit injectors
  • Instrumentation
    • No standard instrumentation
    • Optional — remote instrumentation available Service meter
  • Lube System
    • Crankcase breather — top-mounted
    • Oil cooler
    • Oil filler and dipstick — RH
    • Oil pump
    • Oil filter — RH spin-on type
    • Rear sump oil pan, 250-hour change interval
    • Oil pan drain valve, 3/4" NPT female connection
    • Fumes disposal
    • Scavenger pump
  • Mounting System
    • Trunion front support
  • Power Take-Offs
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Front housing, two-sided
  • Protection System
    • ADEM A3 ECU system to provide customer programmable engine deration strategies to protect against adverse operating conditions
    • Emergency stop logic inputs provided at 40-pin customer interface connection
    • ATAAC (512DW04, 512DW05, 512DW06, 512DW07)
    • Single Air inlet shutoff
  • General
    • Paint, Cat yellow
    • Vibration damper and guard
    • Lifting eyes

Optional Equipment

Specs

Overview

Long Name:
3512C (HD) Well Stimulation Engine with Dynamic Gas Blending Kit
Name:
3512C DGB
Brand:
Caterpillar
Status:
Current

General Specifications

Maximum Rating
2500 BHP / 1864 bkW
Displacement
3574 in³ / 58.6 l
Minimum Rating
2150 BHP / 1603 bkW
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Stroke
8.5 in / 215 mm
Bore
6.7 in / 170 mm

Emissions

Emissions
Non-current EPA Tier 2

Dimensions

Length
110.4 in / 2804 mm
Width
59.2 in / 1504 mm
Height
86.3 in / 2192 mm
Weight
14650 lb / 6645 kg

SEE HOW 3512C DGB COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Well Service Engines
3512C DGB
3512C HD Dry Manifold with ATAAC Petroleum Engine Well Servicing Engines
Brand
Caterpillar
Status
Current
Maximum Rating
2500 BHP / 1864 bkW
Displacement
3574 in³ / 58.6 l
Minimum Rating
2150 BHP / 1603 bkW
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Stroke
8.5 in / 215 mm
Bore
6.7 in / 170 mm
Emissions
Non-current EPA Tier 2
Length
110.4 in / 2804 mm
Width
59.2 in / 1504 mm
Height
86.3 in / 2192 mm
Weight
14650 lb / 6645 kg
Selected Model
Well Service Engines
3512C
3512C HD SCAC Land Well Service Engine
Brand
Caterpillar
Status
Current
Maximum Rating
2500 BHP / 1864 bkW
Displacement
3596 in³ / 58.9 l
Minimum Rating
2250 BHP / 1678 bkW
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Stroke
8.5 in / 215 mm
Bore
6.7 in / 170 mm
Emissions
Non-current EPA Tier 2 and China Stage III
Length
113.8 in / 2880 mm
Width
64.2 in / 1630 mm
Height
86.1 in / 2185 mm
Weight
14145 lb / 6416 kg
More Details
Well Service Engines
3512C HD (Offshore)
3512C HD SCAC Offshore Well Service Petroleum Engine
Brand
Caterpillar
Status
Current
Maximum Rating
2500 BHP / 1864 bkW
Displacement
58.9 in³ / 3596 l
Minimum Rating
2250 BHP / 1678 bkW
Aspiration
Turbocharged-Aftercooled
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
151
Stroke
8.5 in / 215 mm
Bore
6.7 in / 170 mm
Emissions
IMO Tier II and EPA Marine Tier 2
Length
113.8 in / 2880 mm
Width
64.2 in / 1630 mm
Height
86.1 in / 2185 mm
Weight
14145 lb / 6416 kg
More Details