770 (07)
770 Off-Highway Truck
DESCRIPTION
Cat’s 770 40-ton payload sets the standard for haul performance in construction and quarry industries. We’ve taken the best of our rugged, dependable Off-Highway Truck lineup and integrated it with technologies that help our environment, make operators more productive, and dramatically improve the economics of haul fleets. An optimal pass match for the 770 is the Cat 986K or 988K Wheel Loader or the 374F or 390F Hydraulic Excavators. No matter your business type, the 770 is designed to help you move materials safely and efficiently through every haul.Off-Highway Trucks CAT® 770G 772G Introduction
Off-Highway Trucks CAT® 770G 772G Walk Around
ACHIEVE GREATER PRODUCTIVITY
- Haul your materials faster with an accelerated travel speed.
- Put more power to the ground with increased torque.
- Enjoy greater productivity while using a more responsive Traction
Control System (TCS). - Reduce tire wear with maximum by engaging TCS early in the slip.
- Strong, predictable performance helps operators achieve the lowest cost per ton.
BOOST FUEL EFFICIENCY
- Up to 11% less fuel consumption.
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
- Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
- Gain improvements in fuel efficiency with auto-neutral idle.
- Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
- Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.
DESIGNED FOR SAFETY
- Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
- Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Superior brake performance meets the latest brake standards—
ISO 3450:2011. - The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
- Sturdy 4-point mounted cabin meets rollover protective structure/
falling objects protective structure (ROPS/FOPS) standard. - 4-point seat belt provides enhanced safety to the operator.
- Seat belt indicator implements both visual and audible alerts to the
operator when seat belt is not fastened. - Lockout features help the service technician to perform
maintenance work on the machine with safe mode. - Secondary steering activates automatically in case of primary
system failure. - Overload speed limiter works with truck payload system to reduce
machine speed automatically when the truck is overloaded.
WORK IN COMFORT
- Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
- The new operator seat placement provides easier operation and comfort to the operator.
- Improvements in enlarged views of the work area and its surroundings.
- Access connectivity and decrease clutter with more storage areas in the newly designed cab.
- Automatic cab temperature controls.
- Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE
- Integrated systems give you the ability to make timely, fact-based
decisions to maximize efficiency, improve productivity, and lower
costs. - Gain valuable insight into how your machine is performing by continuously
monitoring and collecting vital machine data via the advisor display with the software Vital Information Management System (VIMS™). Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent. - Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
- External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
- Product Link™ system connects to each machine wirelessly,
allowing you to monitor location, hours, fuel use, productivity, idle
time, and diagnostic codes. - VisionLink®
wirelessly connects you to your equipment, giving
you access to essential information you need to know to run your business. - The Cat 770 is MineStar™ ready and includes Cat Product Link
Elite and VIMS to help optimize equipment management, remote
monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic
failure. - Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life.
REDUCED MAINTENANCE COST AND OTHER COSTS
• Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage.
APPLICATION VERSATILITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The flat floor body is perfect for metering material, especially when
feeding the crusher. - Optimize your body life by selecting a liner package best suited
for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- ELECTRICAL
- Alarm, backup
- Alternator, 115 ampere
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (2), 190 amp-hour
- Electrical system, 24V
- Lighting system:
– Backup light (halogen)
– Directional signals/hazard warning (front and rear LED)
– Headlights, (halogen) with dimmer
– Operator access courtesy lights (Developing Market Only)
- PRODUCT LINK™ COMMUNICATIONS
- Product Link Ready
- GUARDS
- Driveline
- Engine crankcase
- OPERATOR ENVIRONMENT
- Air conditioning
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Entertainment Radio Ready:
– 5 amp converter
– Speakers
– Antenna
– Wiring harness - Gauges/indicators:
– Air cleaner service indicator - electronic
– Brake oil temperature gauge
– Coolant temperature gauge
– Hour meter
– Tachometer
– Engine overspeed indicator
– Fuel level
– Speedometer with odometer
– Transmission gear indicator - Heater/defroster (11 070 kCal/43,930 BTU)
- Hoist lever
- Horn, electric
- Light - dome
- Light - courtesy
- Messenger, display unit
- Mirrors
- Power port, 12V
- ROPS cab, insulated/sound suppressed
- Seat, Cat Comfort Series III:
– full air suspension
– four-point harness - Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor, tinted glass
- Throttle lock
- Windshield wiper (intermittent) and washer
- POWER TRAIN
- Air-To-Air Aftercooler (ATAAC)
- Air cleaner with precleaner (1)
- Automatic cold mode idle control
- Electric start
- Turbocharger
- Braking system, hydraulic actuated:
– Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes)
– Brake release motor (towing)
– Caliper-disc (front)
– Extended Life Brakes
– Oil-cooled, multiple disc (rear)
– Parking
– Secondary
– Service - Transmission:
– 7-speed automatic powershift
– Body up-shift inhibitor
– Controlled throttle shifting
– Directional shift management
– Downshift inhibitor
– Neutral start switch
– Neutral coast inhibitor
– Reverse shift inhibitor
– Reverse neutralizer during dumping
– Programmable top gear selection
- SUSPENSION SYSTEMS
- Suspension, front and rear
- OTHER STANDARD EQUIPMENT
- Body safety pin (secures body in up position)
- Body down indicator
- CD-ROM parts book
- Fan, hydraulic demand
- Fuel tank (530 L/140 gal)
- Guard, engine compartment
- Guard, mud
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Reservoirs (separate):
– Brake/converter/hoist
– Steering
– Transmission/torque converter - Rims 15 × 33
- Rock ejectors
- Service platform, left and right side
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks (front)/Tow pin (rear)
- Vandalism protection locks
- ANTIFREEZE
- Extended Life Coolant to -35° C (-30° F)
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPTIONAL EQUIPMENT
- Cat Engine Brake
- Extended Life Brake Discs
- Body heat/diverter box
- Four (4) batteries
- HID lights
- Product Link
- Backup alarm
- Heated mirrors
- Fuel heater
- Ether aid
- Coolant heater
- Auto lube
- Rear vision camera (WAVS)
- Spare rims
- Wheel chocks
- Body sideboards
- Traction Control System (TCS)
Specs
Overview
Long Name:
770 Off-Highway Truck
Name:
770 (07)
Brand:
Caterpillar
Status:
Current
Engine
Engine Model
Cat® C15
Rated Engine Speed
1700 r/min / 1700 r/min
Gross Power - SAE J1995
515 HP / 384 kW
Net Power - SAE J1349
477 HP / 356 kW
Net Power - ISO 9249
477 HP / 356 kW
Net Power - 80/1269/EEC
489 HP / 365 kW
Net Power - ISO 14396
508 HP / 379 kW
Net Torque - SAE J1349
1834 ft·lbf / 2486 N·m
Number of Cylinders
6
Bore
5.4 in / 137 mm
Stroke
6.7 in / 171 mm
Displacement
927.6 in³ / 15.2 l
Emissions
Meets U.S. EPA Tier 4 and EU Stage V emission standards.
Weights - Approximate
Target Gross Machine Operating Weight
157000 lb / 71214 kg
Target Gross Machine Weight
157000 lb / 71214 kg
Chassis Weight
55948 lb / 25378 kg
Body Weight
17306 lb / 7850 kg
Operating Specifications
Nominal Payload Class (100%)
42.1 ton (US) / 38.2 t
Top Speed - Loaded
45.8 mile/h / 73.7 km/h
Target Payload (100%)
42.1 ton (US) / 38.2 t
Maximum Working Payload (110%)
46.3 ton (US) / 42 t
Maximum Allowable Payload (120%)*
50.5 ton (US) / 45.8 t
Body Capacity - SAE 2:1
32.9 yd³ / 25.2 m³
Note (1)
*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.
Note (2)
Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.
Transmission
Forward - 1
7.4 mile/h / 11.9 km/h
Forward - 2
10.1 mile/h / 16.3 km/h
Forward - 3
13.8 mile/h / 22.2 km/h
Forward - 4
18.5 mile/h / 29.8 km/h
Forward - 5
25.1 mile/h / 40.4 km/h
Forward - 6
33.8 mile/h / 54.4 km/h
Forward - 7
45.8 mile/h / 73.7 km/h
Reverse
8.8 mile/h / 14.2 km/h
Final Drives
Differential Ratio
1.92:1
Planetary Ratio
4.80:1
Total Reduction Ratio
9.26:1
Brakes
Brake Surface - Front
216 in² / 1395 cm²
Brake Surface - Rear
6235 in² / 40225 cm²
Brake Standards
ISO 3450:2011
Body Hoists
Pump Flow - High Idle
118 gal/min / 448 l/min
Relief Valve Setting - Raise
2750 psi / 18950 kPa
Relief Valve Setting - Lower
500 psi / 3450 kPa
Body Raise Time - High Idle
7.5 s / 7.5 s
Body Lower Time - Float
10 s / 10 s
Body Power Down - High Idle
10 s / 10 s
Capacity - Dual Slope - 100% Fill Factor
Struck
23.01 yd³ / 17.6 m³
Heaped (SAE 2:1)*
32.9 yd³ / 25.2 m³
Note (2)
*ISO 6483:1980.
Note (1)
Contact your local Cat dealer for body recommendation.
Capacity - Flat Floor - 100% Fill Factor
Struck
23.01 yd³ / 17.6 m³
Heaped (SAE 2:1)*
32.9 yd³ / 25.2 m³
Note (1)
Contact your local Cat dealer for body recommendation.
Note (2)
*ISO 6483:1980.
Weight Distributions - Approximate
Front Axle - Empty
49 % / 49 %
Front Axle - Loaded
34 % / 34 %
Rear Axle - Empty
51 % / 51 %
Rear Axle - Loaded
66 % / 66 %
Suspension
Empty Loaded Cylinder Stroke Front
9.2 in / 234 mm
Empty Loaded Cylinder Stroke Rear
5.9 in / 149 mm
Rear axle - Oscillation
8.9 ° / 8.9 °
Service Refill Capacities
Fuel Tank
140 gal (US) / 530 l
Cooling System
33 gal (US) / 125 l
Crankcase
17 gal (US) / 64 l
Differential - Final Drives
47 gal (US) / 180 l
Steering Tank
14.5 gal (US) / 55 l
Steering System - Including Tank
23 gal (US) / 87 l
Brake/Hoist Hydraulic Tank
38 gal (US) / 145 l
Brake Hoist System
60 gal (US) / 227 l
Torque Converter - Transmission System
17 gal (US) / 64 l
DEF Tank
6 gal (US) / 21 l
Tires
Standard Tire
18.00R33 (E4)
ROPS
ROPS Standards
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards
Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Sound
Sound Standards (1)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.
Sound Standards (2)
Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).
Sound Standards (3)
Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.
Steering
Steering Standards
ISO 5010:2007
Steer Angle
40.5 ° / 40.5 °
Turning Diameter - Front
57.7 ft / 17.6 m
Turning Circle - Clearance Diameter
66.6 ft / 20.3 m
Dimensions
Height - Top of ROPS
12.7 ft / 3857 mm
Overall Body Length
26.8 ft / 8199 mm
Inside Body Length
18.5 ft / 5635 mm
Overall Length
28.9 ft / 8796 mm
Wheel Base
13 ft / 3960 mm
Rear Axle - Tail
8.5 ft / 2586 mm
Ground Clearance
1.6 ft / 518 mm
Dump Clearance
1.7 ft / 506 mm
Loading Height - Empty
10.3 ft / 3147 mm
Inside Body Depth - Maximum
4.6 ft / 1404 mm
Overall Height - Body Raised
27.1 ft / 8255 mm
Operating Width
15.7 ft / 4780 mm
Centerline Front Tire Width
10.2 ft / 3110 mm
Engine Guard Clearance
1.8 ft / 335 mm
Outside Body Width
12.9 ft / 3931 mm
Inside Body Width
11.9 ft / 3627 mm
Front Canopy Height
13.5 ft / 4114 mm
Rear Axle - Clearance
1.8 ft / 548 mm
Centerline of Rear Dual Tire Width
8.3 ft / 2536 mm
Overall Tire Width
12.1 ft / 3693 mm
Engine
Note (1)
Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.
Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (3)
No engine derating required up to 3000 m (9,843 ft) altitude.
Note (4)
Meets Japan Small Volume Exemption.
Weights - Approximate
Note (1)
Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.
Note (2)
Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.
Transmission
Note
Maximum travel speeds with standard 18.00R33 (E4) tires.
Brakes
Note
Target gross machine operating weight is 71 214 kg (157,000 lb).
Steering
Note
Target gross machine operating weight is 71 214 kg (157,000 lb).
Tires
Note (1)
Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)
Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.
SEE HOW 770 (07) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Off-Highway Trucks
770 (07)
- Brand
- Caterpillar
- Status
- Current
Selected Model
