815
815 Soil Compactor
Cat® 815 soil compactors dozer blade and tamping foot design maximize soil spreading and compacting, leaving a smoother working surface for other equipment.
DESCRIPTION
Designed with durability built in, the Cat 815 ensures maximum availability through multiple life cycles. Designed and manufactured for optimum performance and serviceability, this rugged, powerful machine delivers heavy-duty compaction and dozing.Cat Soil Compactors are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to operate more efficiently and safely. Representing a long-standing commitment to quality and performance, this rugged, powerful machine is designed and built for heavy-duty compaction and dozing operations. Focused on helping our customers succeed, we have continued to build upon each new series. The 815 continues our legacy of reliability, performance, safety, operator comfort, serviceability, and efficiency.- Improved ingress/egress with an improved cab with flip up armrest.
- Keep your operators informed about machine conditions and operation with VIMS™ 3G machine monitoring system.
- Safety and visibility enhanced with standard rearview camera.
- Preferred temperature settings maintained with automatic climate control.
- Premium plus seat with leather finish containing forced air heating and cooling, two-way thigh adjustment, power lumbar and back bolster adjustment, and dynamic end dampening.
- Improved comfort with low operator sound levels.
- Improved spectator sound levels and optional low sound packages.
- Easier access and in a controlled environment; electronics bay is located inside the cab.
- Focused on safety with ground level or platform access to most major components.
- Ground level: emergency shutdown, battery disconnect, and jump start.
- Quick visual inspection and minimize fluid contamination with sight gauges for coolant, transmission, and hydraulic oil.
- Electronic air inlet restriction indicator.
- Designed for ease of service and inspection.
– Hydraulic oil cooler, fuel cooler, and condenser grouped together
– Centralized grease points - Operators and technicians can resolve any problems before failure using Vital Information Management System (VIMS).
- Powerful, responsive Cat® 7.1 engine is designed for maximum fuel economy and increased power density.
- Reliable performance and low emissions.
- High productivity with optional four-way tilting blade.
- Two engine options available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 3 and EU Stage IIIA equivalent.
- For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, diesel particulate filter, and Cat Regeneration System, utilizing SCR technology.
- Regeneration is completely automatic and does not interrupt the machine’s work cycle.
- Experience maximum responsiveness and control with Steering and Transmission Integrated Control System (STIC™).
- Conserve more fuel with the automatic engine and electrical system shutdown.
- Achieve greater momentum on grades and fuel savings by carrying that momentum through the shift points with the all new Advanced Productivity Electronic Control System (APECS) transmission controls.
- Operators experience less fatigue with throttle lock to maintain engine speed and reduce fuel burn.
- Optional Cat Compact 3D mapping technology combines advanced compaction measurement, in-cab guidance, and reporting capabilities to help you consistently meet compaction targets fast, uniformly, and in fewer passes – saving on fuel and the cost of unnecessary rework.
- Cat Compaction Control with Machine Drive Power (MDP) is an energy-based measurement system that correlates compaction with rolling resistance to provide an indication of soil stiffness.
- Link technology (standard) provides access to machine location, hours, fuel consumption, idle time, events, and diagnostic codes through the online VisionLink® interface.
- Chevron tamping tip design provides greater ground pressure, more compaction, excellent traction, and a smooth ride.
- Symmetrical tamping tip pattern results in equal compaction in forward or reverse. Tips are full perimeter and replaceable. The tip is welded to a base assembly, then welded directly to the drum.
- Each wheel has two cleaner bars to keep the drums free of carryover dirt, regardless of rolling direction so efficiency is maximized.
- The adjustable cleaner bar tips (standard or abrasive type) are heat-treated and direct-hardened cutting edge steel to increase wear life, which translates into lower operating costs.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWER TRAIN
- Advanced Productivity Electronic Control System (APECS)
- Air to air aftercooler
- Brakes, full hydraulic, enclosed, wet multiple disc service brakes
- Cat clean emission module (Tier 4 Final/Stage IV only)
- Electro-hydraulic parking brake
- Electronic Clutch Pressure Control (ECPC)
- Engine, Cat C7.1 (configured for two emissions options): – Tier 4 Final/Stage V – Tier 3/Stage IIIA equivalent
- Engine driven cooling fan – suction
- Fuel priming pump (electric)
- Fuel to air cooler
- Ground level engine shutoff
- Muffler (under hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, unit core
- Starting aid (ether)
- Throttle lock
- Torque converter
- Transmission, planetary, with 3F/3R speed range control
- ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance-free
- Electrical system, 24V
- Ground level lockable master disconnect switch
- Lights, directional (rear)
- Light, warning switched (LED strobe)
- Lighting system, (front and rear)
- Starter, electric
- Starting receptacle for emergency start
- OPERATOR ENVIRONMENT
- 12V power port for mobile phone or laptop connection
- AccuGrade™ mapping (ready)
- Air conditioner
- Cab, sound-suppressed pressurized
- Cab door, sliding window (LH)
- Cat Compaction Control (ready)
- Cat Detect: Object Detection (ready)
- Coat and hard hat hooks
- Finger tip shifting controls
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Hydraulic controls – seat mounted
- Implement hydraulic lockout
- Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage V only) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
- Light, (dome) cab
- Lunch box and beverage holders
- Mirror, internal (panoramic)
- Mirrors, rearview (externally mounted)
- Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
- Seat, Cat Premium Plus (leather)
- Seat belt with minder, retractable, 76 mm (3 in) wide
- STIC control system with lockout
- Sun visor, front
- Tinted glass
- Transmission gear (indicator)
- Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles – Event indicator light on rear grill
- Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)
- TIRES, RIMS AND WHEELS
- Wheels, tamping foot
- GUARDS
- Cleaner bars with teeth
- Guards, crankcase and power train
- Guard, driveshaft
- FLUIDS
- Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
- OTHER STANDARD EQUIPMENT
- DEF tank fill gauge
- Doors, service access (locking)
- Ecology drains for engine, radiator, transmission, hydraulic tank
- Engine, crankcase, 500 hour interval with CJ-4 oil
- Emergency platform egress
- Fire suppression ready
- Fuel tank, 500 L (132.1 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, engine, and transmission oil coolers
- Oil change system, high speed
- Oil sampling valves
- Steering, load sensing
- Total hydraulic filtration system
- Vandalism protection caplocks
- Venturi stack
- STANDARD ATTACHMENTS – HYDRAULICS
- Hydraulics: – Standard or EU and Canada
- STANDARD ATTACHMENTS – OPERATOR ENVIRONMENT
- Glass (window): – rubber-mounted glass
- Precleaner (cab): – powered
- Seat (cab): – heated and ventilated
- Mirrors – cab: – Standard or heated
- STANDARD ATTACHMENTS – POWER TRAIN
- Axles: – Standard or non-spin rear
- STANDARD ATTACHMENTS – SPECIAL ARRANGEMENTS
- Engine Precleaners: – Turbine or dual stage
- STANDARD ATTACHMENTS – ELECTRICAL
- Lights: – Standard or LED
- STANDARD ATTACHMENTS – FUEL SYSTEMS
- Fuel tank: – Non-fast or fast fill
- STANDARD ATTACHMENTS – TECHNOLOGY PRODUCTS
- Product Link: – GSM, satellite
- STANDARD ATTACHMENTS – CLEANER BARS
- Cleaner bars: – Standard or abrasive
- STANDARD ATTACHMENTS – BLADES
- Blades: – Straight or tilt-straight
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPERATOR ENVIRONMENT
- Camera, rear vision
- Radio, AM/FM/AUX/USB/BLUETOOTH
- Radio, CB (ready)
- TECHNOLOGY PRODUCTS
- Compaction control, basic
- OTHER ATTACHMENTS
- Sound suppression (required for Brazil)
- FLUIDS
- Antifreeze, –50° C (–58° F)
- STARTING AIDS
- Heater, engine coolant, 120V
- Heater, engine coolant, 240V
- MISCELLANEOUS
- Film (ANSI) (Tier 4 Final/Stage V only)
- EU certification (Tier 4 Final/Stage V only)
- Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
Specs
Overview
Long Name:
815 Soil Compactor
Name:
815
Brand:
Caterpillar
Status:
Current
Engine - Tier 4 Final/EU Stage V
Engine Model
Cat® C7.1: configured for two emissions options
Net Power (SAE J1349:2011)
249 HP / 186 kW
Net Power (ISO 9249:2007)
249 HP / 186 kW
Emissions
Meets U.S. EPA Tier 4 Final/EU Stage V emission standards
Rated Speed
2200 r/min / 2200 r/min
Gross Power (SAE J1995:2014)
284 HP / 212 kW
Engine Power (ISO 14396:2002)
275 HP / 205 kW
Peak Torque - 1,400 rpm
902 lb-ft @ 1400 rpm / 1223 N·m
Torque Rise
52%
Bore
4.1 in / 105 mm
Stroke
5.3 in / 135 mm
Displacement
427.8 in³ / 7.01 l
High Idle Speed
2270 r/min / 2270 r/min
Low Idle Speed
800 r/min / 800 r/min
Maximum Altitude without Derating
9842.5 ft / 3000 m
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
Cat® C7.1: configured for two emissions options
Net Power (SAE J1349:2011)
249 HP / 186 kW
Emissions
Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
Rated Speed
2200 r/min / 2200 r/min
Gross Power (SAE J1995:2014)
286 HP / 213 kW
Engine Power (ISO 14396:2002)
275 HP / 205 kW
Peak Torque - 1,400 rpm
749 lb-ft @ 1400 rpm / 1016 N·m
Torque Rise
26%
Bore
4.1 in³ / 105 mm
Stroke
5.3 in / 135 mm
Displacement
5.3 in / 135 mm
High Idle Speed
2270 r/min / 2270 r/min
Low Idle Speed
800 r/min / 800 r/min
Maximum Altitude without Derating
9842.5 ft / 3000 m
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
49652 lb / 22522 kg
Transmission
Transmission Type
Cat Planetary Power Shift
Travel Speeds - Forward - First
3.9 mile/h / 6.3 km/h
Travel Speeds - Forward - Second
7.7 mile/h / 10.8 km/h
Travel Speeds - Forward - Third
11.3 mile/h / 18.2 km/h
Travel Speeds - Reverse - First
4.5 mile/h / 7.2 km/h
Travel Speeds - Reverse - Second
8.5 mile/h / 12.4 km/h
Travel Speeds - Reverse - Third
11.4 mile/h / 18.4 km/h
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
Lift/Tilt System
Variable displacement piston
Maximum Flow at 2,200 rpm
23.5 gal/min / 89 l/min
Relief Valve Setting - Lift/Tilt
3190 psi / 22000 kPa
Pilot System
Open center, fixed displacement gear
Pilot Relief Valve Setting
3046 psi / 21000 kPa
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston – Variable Displacement
Maximum Flow at 2,200 rpm
38.8 gal/min / 147 l/min
Relief Valve Setting - Steering
4003 psi / 27600 kPa
Total Steering Angle
84
Steering Cycle Times - High Idle
3 s / 3 s
Steering Cycle Times - Low Idle
8.2 s / 8.2 s
Service Refill Capacities
Fuel Tank
132.1 gal (US) / 500 l
Dimensions (Approximate)
Height - Top of Beacon
12.9 ft / 3933 mm
Service Refill Capacities
Diesel Exhaust Fluid Tank*
4.2 gal (US) / 16 l
Dimensions (Approximate)
Height - Top of Cab Roof
12 ft / 3650 mm
Height - Top of Exhaust Pipe
11.1 ft / 3344 mm
Service Refill Capacities
Cooling Systems - Tier 4 Final/EU Stage V
21.4 gal (US) / 81 l
Cooling System - Tier 3/Stage IIIA Equivalent
19.3 gal (US) / 73 l
Dimensions (Approximate)
Height - Top of Hood
8.6 ft / 2616 mm
Service Refill Capacities
Engine Crankcase
5.3 gal (US) / 20 l
Dimensions (Approximate)
Height to Top of Radiator Guard
7.9 ft / 2405 mm
Service Refill Capacities
Transmission
14.8 gal (US) / 56 l
Dimensions (Approximate)
Ground Clearance to Hitch
1.2 ft / 365 mm
Service Refill Capacities
Differential - Final Drives - Front
17.2 gal (US) / 65 l
Dimensions (Approximate)
Ground Clearance to Transmission Guard
1.2 ft / 375 mm
Service Refill Capacities
Differential - Final Drives - Rear
17.2 gal (US) / 65 l
Dimensions (Approximate)
Ground Clearance to Bottom of Bumper
2.2 ft / 665 mm
Centerline of Rear Axle to Bumper
6.5 ft / 1990 mm
Hitch to Centerline of Front Axle
5.5 ft / 1675 mm
Service Refill Capacities
Hydraulic Tank Only
19.8 gal (US) / 75 l
Note
All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.
Dimensions (Approximate)
Wheel Base
11 ft / 3350 mm
Width over Platform
10.3 ft / 3140 mm
Height to Top of GPS Antenna
12.1 ft / 3701 mm
Overall Machine Length with Straight Blade
23.5 ft / 7157 mm
Overall Machine Length with EU Suppression
24.9 ft / 7598 mm
Axles
Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±10
Braking System
Service Brakes
Single Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
70 dB(A) / 70 dB(A)
Machine Sound Level (ISO 6395)
111 dB(A) / 111 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
70 dB(A) / 70 dB(A)
Machine Sound Level (ISO 6395)
109 dB(A) / 109 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
70 dB(A) / 70 dB(A)
Machine Sound Level (ISO 6395)
112 dB(A) / 112 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
70 dB(A) / 70 dB(A)
Machine Sound Level (ISO 6395)
110 dB(A) / 110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
Note (2)
The operator sound pressure level uncertainty is ± 2 dB(A)
Note (3)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (4)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
Sound Performance - Tier 4 Final/EU Stage V - Suppression EU
Machine Sound Level (ISO 6393)
107 dB(A) / 107 dB(A)
Note (1)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.
Wheels
Weight
9720 lb / 4409 kg
Outside Diameter
55.6 in / 1412 mm
Drum Diameter
40.5 in / 1029 mm
Drum Width
39 in / 991 mm
Tips per Row
12
Tips per Wheel
60
Replaceable
Weld On
Width - Over Drums
127.7 in / 3243 mm
Width Between Drums
49.6 in / 1261 mm
Tip Height
7.5 in / 192 mm
Blades
Capacity
2.69 yd³ / 2.06 m³
Overall Width
12.3 ft / 3761 mm
Height
2.8 ft / 860 mm
Digging Depth
0.7 ft / 222 mm
Ground Clearance
2.6 ft / 802 mm
Maximum Tilt
1.1 ft / 346 mm
Turning Radius - Outside Corner of Blade
21.1 ft / 6437 mm
Turning Radius - Inside Face of Pusharm
8.3 ft / 2520 mm
Weight
1764 lb / 800 kg
Total Operating Weight
49652 lb / 22522 kg
SEE HOW 815 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Soil Compactors
815
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C7.1: configured for two emissions options
- Emissions
- Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Bore
- 4.1 in³ / 105 mm
- Stroke
- 5.3 in / 135 mm
- Displacement
- 5.3 in / 135 mm
- High Idle Speed
- 2270 r/min / 2270 r/min
- Low Idle Speed
- 800 r/min / 800 r/min
- Operating Weight
- 49652 lb / 22522 kg
- Transmission Type
- Cat Planetary Power Shift
- Travel Speeds - Forward - First
- 3.9 mile/h / 6.3 km/h
- Travel Speeds - Forward - Second
- 7.7 mile/h / 10.8 km/h
- Travel Speeds - Forward - Third
- 11.3 mile/h / 18.2 km/h
- Travel Speeds - Reverse - First
- 4.5 mile/h / 7.2 km/h
- Travel Speeds - Reverse - Second
- 8.5 mile/h / 12.4 km/h
- Travel Speeds - Reverse - Third
- 11.4 mile/h / 18.4 km/h
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston – Variable Displacement
- Fuel Tank
- 132.1 gal (US) / 500 l
- Height - Top of Beacon
- 12.9 ft / 3933 mm
- Height - Top of Exhaust Pipe
- 11.1 ft / 3344 mm
- Height - Top of Hood
- 8.6 ft / 2616 mm
- Engine Crankcase
- 5.3 gal (US) / 20 l
- Transmission
- 14.8 gal (US) / 56 l
- Differential - Final Drives - Front
- 17.2 gal (US) / 65 l
- Differential - Final Drives - Rear
- 17.2 gal (US) / 65 l
- Hitch to Centerline of Front Axle
- 5.5 ft / 1675 mm
- Hydraulic Tank Only
- 19.8 gal (US) / 75 l
- Wheel Base
- 11 ft / 3350 mm
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±10
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
- Machine Sound Level (ISO 6395)
- 110 dB(A) / 110 dB(A)
- Weight
- 1764 lb / 800 kg
- Outside Diameter
- 55.6 in / 1412 mm
- Drum Diameter
- 40.5 in / 1029 mm
- Drum Width
- 39 in / 991 mm
- Tips per Wheel
- 60
- Width - Over Drums
- 127.7 in / 3243 mm
- Ground Clearance
- 2.6 ft / 802 mm
Selected Model
Soil Compactors
825K
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- C15 Cat
- Emissions
- Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
- Bore
- 5.4 in / 137.2 mm
- Stroke
- 22.7 in / 576 mm
- Displacement
- 927.6 in³ / 15.2 l
- High Idle Speed
- 2300 r/min / 2300 r/min
- Low Idle Speed
- 800 r/min / 800 r/min
- Operating Weight
- 78326 lb / 35528 kg
- Transmission Type
- Planetengetriebe ? Lastschaltgetriebe ? ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)
- Travel Speeds - Forward - First
- 3.4 mile/h / 5.5 km/h
- Travel Speeds - Forward - Second
- 6 mile/h / 9.7 km/h
- Travel Speeds - Forward - Third
- 10.7 mile/h / 17.2 km/h
- Travel Speeds - Reverse - First
- 3.9 mile/h / 6.2 km/h
- Travel Speeds - Reverse - Second
- 6.9 mile/h / 11.1 km/h
- Travel Speeds - Reverse - Third
- 12.2 mile/h / 19.7 km/h
- Steering System - Circuit
- Double Acting ? End Mounted
- Steering System - Pump
- Piston ? Variable Displacement
- Fuel Tank
- 206.6 gal (US) / 782 l
- Height - Top of Beacon
- 14.4 ft / 4381 mm
- Height - Top of Exhaust Pipe
- 14.1 ft / 4290 mm
- Height - Top of Hood
- 10.4 ft / 3162 mm
- Engine Crankcase
- 9 gal (US) / 34 l
- Transmission
- 17.4 gal (US) / 66 l
- Differential - Final Drives - Front
- 26.4 gal (US) / 100 l
- Differential - Final Drives - Rear
- 29.1 gal (US) / 110 l
- Hitch to Centerline of Front Axle
- 6.1 ft / 1850 mm
- Hydraulic Tank Only
- 35.4 gal (US) / 134 l
- Wheel Base
- 12.1 ft / 3700 mm
- Front
- Planetary ? Fixed
- Rear
- Planetary ? Oscillating
- Oscillation Angle
- ?8?
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
- Machine Sound Level (ISO 6395)
- 110 dB(A) / 110 dB(A)
- Weight
- 16167 lb / 7333 kg
- Outside Diameter
- 5.5 ft / 1672 mm
- Drum Diameter
- 4.3 ft / 1299 mm
- Drum Width
- 3.7 ft / 1125 mm
- Tips per Wheel
- 65
- Width - Over Drums
- 11.98 ft / 3650 mm
- Ground Clearance
- 1.6 ft / 492 mm