C15

Cat® C15 Diesel Engine

C15 Tier 4 Diesel Engine

DESCRIPTION

The Cat® C15 Industrial Diesel Engine is offered in ratings ranging from 354-433 bkW (475-580 bhp) @ 1800-2100 rpm. Industries and applications powered by C15 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.On construction sites and mining operations, in agriculture and forestry, and in a wide range of industries, Cat® C15 Industrial Diesel Engines deliver the power, performance and durability to take on the biggest challenges. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat® industrial engine. Industries and applications powered by C15 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.Industrial Power

Installation

The Cat C15 offers a fully-configurable engine across a wide range of power nodes, flexible aftertreatment mounting options and the ability to install the engine's IPU straight from the factory, so OEMs can keep installation time and costs to a minimum.

Advanced Features

With transparent regeneration technology built into every Cat C15, operators can continue to be productive without ever having to wait. The C15 also features a 5,000-hour DPF service interval and DEF capacity of 93.7 liters, giving machine operators the opportunity to spend more time on the job site and less time in the shop.

Ideal Applications

Industrial, agricultural and construction applications such as: Compressors • Trenchers • Chippers • Grinders • Irrigation equipment • Bore rigs • Drill rigs • Pumps • Hydraulic power units

Total Cost of Ownership

Operators know the true costs of owning an engine goes beyond the rough and reliable exterior. That's why the Cat C15 was developed to optimize fluid consumption based on a wide range of operating cycles and applications. And with 500-hour maintenance intervals, owners can keep parts and service costs low.

Cat Dealer Product Support

Say goodbye to complicated service routines and start enjoying scheduled maintenance and worldwide dealer support with the Cat C15. Not only does the engine come with a warranty, it’s also backed by the Cat dealer support network across 192 countries. See your Cat dealer for details.

Safety

Each Cat C15 features a clean emissions module that uses DOC, DPF and SCR technologies to keep the engine running cleaner, longer. Besides, cleaner air isn't just good for the engine, it's also a win for the environment and makes for safer working conditions.

  • Standard Equipment
  • Specs

Standard Equipment

  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
    • Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)
  • Control System
    • Electronic control system
    • Over-foam wiring harness
    • Automatic altitude compensation
    • Power compensated for fuel temperature
    • Configurable software features
    • Engine monitoring system SAE J1939 broadcast and control
    • Integrated Electronic Control Unit (ECU)
    • Remote fan control
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Centrifugal water pump
    • Guidance on cooling system design available through your dealer to ensure equipment reliability
  • Flywheels and Flywheel Housing
    • Choice of SAE No. 0 or SAE No. 1 flywheel housing
    • Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).
  • Fuel System
    • MEUI injection
    • Primary fuel filter
    • Secondary fuel filters
    • Fuel transfer pump
    • Electronic fuel priming
  • Lube System
    • Open crankcase ventilation system
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Oil dipstick
    • Gear driven oil pump
    • Choice of front, rear or center sumps
    • Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)
  • Power Take Off (PTO)
    • SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.
  • General
    • Paint: Caterpillar yellow, with optional colors available at request
  • U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • NOx Reduction System (NRS)
    • Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
    • Available in 12 volt or 24 volt systems
  • U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment
    • Cat Regeneration System
    • Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
    • Aftertreatment Electronic Control Unit (ECU)
    • NOx Reduction System (NRS)
    • Pump Electronic Control Unit (PETU)
    • Selective Catalytic Reduction (SCR)
    • Available in 12V or 24V systems

Specs

Overview

Long Name:
Cat® C15 Diesel Engine
Name:
C15
Brand:
Caterpillar
Status:
Current

Power Rating

Maximum Power
580 hp / 433 kW
Maximum Torque
1958 lb-ft @ 1400 rpm / 2655 Nm @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
475 hp / 354 kW

Emission Standards

Emissions
U.S. EPA Tier 4 Final

General

Engine Configuration
In-Line 6
Bore
5.4 in / 137 mm
Stroke
6.7 in / 171 mm
Displacement
927.6 in³ / 15.2 l
Compression Ratio
17.0:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR

Engine Dimensions - Approximate

Length
56.6 in / 1438 mm
Width
38.1 in / 969 mm
Height
49.1 in / 1248 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3673 lb / 1666 kg

Aftertreatment Dimensions

Length
45.4 in / 1153 mm
Width
43.8 in / 1112 mm
Height
25.7 in / 654 mm

Aftertreatment Dimensions*

Diameter
14 in / 356 mm

Aftertreatment Dimensions

Weight
600 lb / 272 kg

PETU Dimensions - Tier 4 Final Only

Length
33.6 in / 854 mm
Width
11.3 in / 287 mm
Height
21.7 in / 551 mm
Weight
42.8 lb / 19.4 kg
Volume Capacity
51.1 qt (US) / 48.4 l

SEE HOW C15 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Industrial Diesel Engines
C15
C15 Tier 4 Diesel Engine
Brand
Caterpillar
Status
Current
Maximum Power
580 hp / 433 kW
Maximum Torque
1958 lb-ft @ 1400 rpm / 2655 Nm @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
475 hp / 354 kW
Emissions
U.S. EPA Tier 4 Final
Engine Configuration
In-Line 6
Bore
5.4 in / 137 mm
Stroke
6.7 in / 171 mm
Displacement
927.6 in³ / 15.2 l
Compression Ratio
17.0:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Length
33.6 in / 854 mm
Width
11.3 in / 287 mm
Height
21.7 in / 551 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3673 lb / 1666 kg
Industrial Diesel Engines
C13B China NR4
C13B Tier 4 Diesel Engines - Highly Regulated
Brand
Caterpillar
Status
Current
Maximum Power
577 hp / 430 kW
Maximum Torque
1943 lb-ft @ 1400 rpm / 2634 Nm @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
456 hp / 340 kW
Emissions
China Nonroad IV
Engine Configuration
In-Line 6
Bore
5.1 in / 130 mm
Stroke
6.2 in / 157 mm
Displacement
762.8 in³ / 12.5 l
Compression Ratio
15.8:1
Aspiration
Turbocharged-Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
DOC+DPF+SCR
Length
35.3 in / 896 mm
Width
31.8 in / 807 mm
Height
18.1 in / 460 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
2480 lb / 1125 kg
Industrial Diesel Engines
C15
C15 LRC
Brand
Caterpillar
Status
Current
Maximum Power
595 hp / 444 kW
Maximum Torque
2004 lb-ft @ 1400 rpm / 2717 Nm @ 1400 rpm
Rated Speed
1800-2100 rpm
Minimum Power
440 hp / 328 kW
Emissions
China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.4 in / 137 mm
Stroke
6.8 in / 171 mm
Displacement
927.6 in³ / 15.2 l
Compression Ratio
18.0:1
Aspiration
Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
54.2 in / 1377 mm
Width
36.2 in / 919 mm
Height
48.3 in / 1226 mm
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3239 lb / 1469 kg