C18 ACERT Tier 3 Recreational

Cat C18 ACERT High Performance Propulsion Engine (Tier 3 Recreational)

C18 ACERT Tier 3 Recreational

DESCRIPTION

The C18 ACERT marine propulsion engine has ratings for recreational applications that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA Regulations. This marine engine incorporates the latest core engine system innovations to provide maximum benefits in power density, performance, emissions, and fuel efficiency. Not only is it equipped with engine monitoring and protection features, it is also compatible with Cat display and vessel control systems. With this engine comes the unmatched worldwide marine support network including Cat dealers and hundreds of authorized marine dealers. Their combined experience and expertise, products and services, backup and support allow your recreational pleasure craft to remain precisely that — a pleasure.The C18 ACERT marine propulsion engine has ratings for recreational applications that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA Regulations. This marine engine incorporates the latest core engine system innovations to provide maximum benefits in power density, performance, emissions, and fuel efficiency. Not only is it equipped with engine monitoring and protection features, it is also compatible with Cat display and vessel control systems. With this engine comes the unmatched worldwide marine support network including Cat dealers and hundreds of authorized marine dealers. Their combined experience and expertise, products and services, backup and support allow your recreational pleasure craft to remain precisely that — a pleasure.

Separate circuit aftercooling system

The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler

Emissions

EPA Tier 3 compliant, IMO II and EU IWW compliant

Cooling system

Heat exchanger and Keel cooled options for all ratings

Turbo Configurations

Single turbo configurations for all ratings

Competitive size and weight

Marine Certifications

All major MCS type approvals available from factory

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • AIR INLET SYSTEM
    • Aftercooler - sea water, corrosion resistant
    • Air cleaner/fumes disposal (closed system)
    • Turbocharger, jacket water cooled
    • Front-down and rear-down aftercooler condensate drains
  • CONTROL SYSTEM
    • Electronic diagnostics and fault logging
    • Cold mode start strategy
    • Engine and transmission monitoring (speed, temperature, pressure)
    • Electronic fuel/air ratio control
    • 70-pin customer connector
    • Engine Protection Mode for High Ambient Conditions
    • Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-)
  • COOLING SYSTEM
    • Sea water pump, rubber impeller, self-priming, gear driven
    • Sea water aftercooled
    • Jacket water pump, gear driven
    • JW Heat Exchanger - Titanium plate with integral fuel cooler expansion tank, and thermostat housing (fully open temp 92C)
    • Coolant recovery system
  • EXHAUST SYSTEM
    • Water-cooled exhaust manifold & turbocharger
    • 114.3 mm (4.5 in) ID round flanged exhaust outlet
  • FLYWHEELS & FLYWHEEL HOUSINGS
    • Flywheel Housing, SAE No. 1
    • Flywheel, 18 inch, 113 teeth
    • SAE standard rotation
  • FUEL SYSTEM
    • Fuel filter, RH service on Port, LH service on Starboard
    • Fuel transfer pump
    • Fuel priming pump
    • Hybrid fuel line design
  • LUBE SYSTEM
    • Crankcase breather
    • Oil cooler
    • Oil filter, spin-on, low profile, RH service on Port, LH service on
    • Oil pan, center sump
    • Dipstick, RH service on Port, LH service on Starboard
    • Oil pump, gear driven
  • POWER TAKE-OFFS
    • Hydraulic pump drive, SAE A, 11-tooth spline, 46 ft-lbs max torque, counterclockwise as viewed from the front of the engine with 1.41 x engine speed
    • Crankshaft pulley, 292 mm (11.5 in) two groove, 15.88 mm (0.63 in) width
  • PROTECTION SYSTEM
    • A4 ECM Electronic Engine Monitoring System provides customer programmable engine de-rate strategies to protect against adverse operating conditions
  • GENERAL
    • Front damper guard
    • Lifting eyes
    • RH or LH service options
    • Upper rear-facing customer wiring connector and Service Tool connection

Optional Equipment

Specs

Overview

Long Name:
Cat C18 ACERT High Performance Propulsion Engine (Tier 3 Recreational)
Name:
C18 ACERT Tier 3 Recreational
Brand:
Caterpillar
Status:
Current

Ratings

Power Range
1015-1150 mhp, 1001-1136 bhp, 747-847 bkW

Engine

Speed Range
2300 rpm
Emissions
EPA Tier 3, IMO II, EU IW
Aspiration
TA,TTA
Bore
5.7 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1106 in³ / 18.1 l
Rotation from Flywheel End
Counterclockwise
Configuration
In-line 6, 4-Stroke-Cycle Diesel

Dimensions & Weights

Maximum Height
51.2 in / 1300 mm
Maximum Dry Weight
4299 lb / 47.4 kg
Maximum Width
47.4 in / 1204 mm
Maximum Length
76 in / 1931 mm
Minimum Length
73 in / 1854 mm
Minimum Dry Weight
4000 lb / 44.6 kg
Minimum Width
44.6 in / 1134 mm
Minimum Height
47.2 in / 1198 mm

SEE HOW C18 ACERT Tier 3 Recreational COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

High Performance Propulsion and Maneuvering Solutions
C18 ACERT Tier 3 Recreational
C18 ACERT Tier 3 Recreational
Brand
Caterpillar
Status
Current
Power Range
1015-1150 mhp, 1001-1136 bhp, 747-847 bkW
Speed Range
2300 rpm
Emissions
EPA Tier 3, IMO II, EU IW
Aspiration
TA,TTA
Bore
5.7 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1106 in³ / 18.1 l
Rotation from Flywheel End
Counterclockwise
Configuration
In-line 6, 4-Stroke-Cycle Diesel
Selected Model
High Performance Propulsion and Maneuvering Solutions
C18 ACERT Tier 3
C18 ACERT Tier 3
Brand
Caterpillar
Status
Current
Power Range
814-1015 mhp, 803-1001 bhp, 599-747 bkW
Speed Range
2100-2300 rpm
Emissions
EPA Tier 3, IMO II, EU Stage IIIA
Aspiration
TA,TTA
Bore
5.7 in / 145 mm
Stroke
7.2 in / 183 mm
Displacement
1106 in³ / 18.1 l
Rotation from Flywheel End
Counterclockwise
Configuration
In-line 6, 4-Stroke-Cycle Diesel
More Details
High Performance Propulsion and Maneuvering Solutions
C32
C32
Brand
Caterpillar
Status
Current
Power Range
1600-1900 bhp (1193-1417 bkW)
Speed Range
2300 rpm
Emissions
IMO II, U.S. EPA Tier 3 Recreational, RCD, China Stage II
Aspiration
Twin Turbocharged-aftercooled
Bore
5.71 in / 145 mm
Stroke
6.38 in / 162 mm
Displacement
1959 in³ / 32.1 l
Rotation from Flywheel End
Counterclockwise
Configuration
Vee 12, 4-Stroke Cycle diesel
More Details