C27 ACERT™ (Tier 4 Final)
C27 ACERT™ Tier 4 Final Engine
DESCRIPTION
Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs while meeting the tightest environmental requirements. This is an ideal engine for applications that require Tier 4 Final emissions certifications in well service application such as well stimulation, pump skids, nitrogen units, acidizing units, blenders, and hydraulic power units. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C27 ACERT engines, with ratings: 597-708 bkW (800-950 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards. This information about Emissions describes the particular rating's emissions technology. For more information about emissions certification, please contact your local Cat dealer.Advanced Digital Engine Management
ADEM A4 control system providing integrated ignition, speed governing, protection, and controls, including detonation-sensitive variable ignition timing. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.
Transmissions
- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. - Please contact Application Support Center for details.
Testing
Every engine is full-load tested to ensure proper engine performance
Product Support Offered Through Global Cat Dealer
- More than 2,200 dealer outlets - Caterpillar factory-trained dealer technicians service every aspect of your petroleum engine - Caterpillar parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.
- Standard Equipment
- Specs
- Docs
Standard Equipment
- Air Inlet System
- Twin rear-mounted turbochargers, ATAAC
- Control System
- Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
- Cooling System
- Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
- Exhaust System
- Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
- Fuel System
- Mechanical Electronic Unit Injection (MEUI™) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
- Lube System
- Remote-mounted oil filters and RH-side blockmounted filters are available; crankcase fumes disposal system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour
Specs
Overview
General Specifications
Emissions
Dimensions
Capacity for Liquids
SEE HOW C27 ACERT™ (Tier 4 Final) COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 1648 in³ / 27 l
- Governor and Protection
- ADEM A4
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0
- Flywheel Teeth
- 136
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6 in / 152.4 mm
- Bore
- 5.4 in / 137.7 mm
- Emissions
- U.S. EPA Tier 4 Final
- Length
- 85 in / 2159 mm
- Width
- 49 in / 1253 mm
- Height
- 63 in / 1594 mm
- Weight
- 6151 lb / 2790 kg
- Cooling System
- 15.9 gal (US) / 60 l
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 1658 in³ / 27.2 l
- Governor and Protection
- ADEM A3
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136 (SAE No. 0), 113 (SAE No. 1)
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6 in / 152.4 mm
- Bore
- 5.4 in / 137.7 mm
- Emissions
- 2006 EPA and CARB Tier 2, and EC Stage II Non-Road emissions certified
- Length
- 75.5 in / 1918 mm
- Width
- 57.6 in / 1463 mm
- Height
- 52 in / 1321 mm
- Weight
- 6382 lb / 2895 kg
- Cooling System
- 14.5 gal (US) / 54.9 l
- Brand
- Caterpillar
- Status
- Current
- Displacement
- 1960.5 in³ / 32.1 l
- Governor and Protection
- ADEM A3
- Aspiration
- Turbocharged-Aftercooled
- Flywheel and Flywheel Housing
- SAE No. 0 or SAE No. 1
- Flywheel Teeth
- 136
- Rotation from Flywheel End
- Counterclockwise
- Stroke
- 6.4 in / 162 mm
- Bore
- 5.7 in / 145 mm
- Emissions
- EPA and CARB Non-Road Mobile Tier 2, IMO Tier II, China Stage III
- Length
- 75.5 in / 1918 mm
- Width
- 58 in / 1473 mm
- Height
- 52 in / 1321 mm
- Weight
- 5040 lb / 2286 kg
- Cooling System
- 14.5 gal (US) / 55 l