Cat® CS Series
Cat® CS – ATS (Spec Grade)
DESCRIPTION
The CS Series – Contactor-type, Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT) ATS is equipped with an intuitive full-color touchscreen HMI and is compatible with Ekip Connect software for commissioning and operation.The CS Series has an array of standard programmable functions and is built for high performance and service with proactive outage mitigation that monitors temperature and contact health.
Product Feature
- Voltage and frequency sensing of both sources and load
- USB port to upload/download settings
- Available Bluetooth connection and enhanced communication capabilities
- Password protection color touchscreen HMI
- Integrated help button and menu
- Five programmed packages and IO
- Contact wear monitoring including real-time status and predicted contact end-of-life (30-1200A only)
- Fast controller response to outage recovery and fast switching (<50ms)
Control Panel
- TruOne L4 - color touchscreen HMI compatible with Ekip Connect software, with standard programmable functions and IO, and fast controller response to outage recovery and fast switching (<50ms).
Functions
- High current protection and alarm
- Wide 200-480V range with auto-configuration of system settings for 30-1200A range
- High time-based withstand and closing ratings (WCR)
- Short-time withstand ratings in every frame (CS, CSD, and CSCT models)
Standards
- UL 1008, NFPA 70, 99, 101 and 110
- NEMA ICS 10
- cUL
- Conducted and radiated emissions - CISPR 11:2009, Class A
- ESD immunity test - IEC/EN 61000-4-2 Class B
- Radiated RF, electromagnetic field immunity test - IEC/EN 61000-4-3 10 V/m
- Electrical fast, transient/burst immunity test - IEC/EN 61000-4-4
- Surge immunity test - IEC/EN 61000-4-5 0.5 to 2 kV
- Conducted immunity test - IEC/EN 61000-4-6
- Voltage dips and interruption immunity - IEC/EN 61000-4-11
- Harmonic voltage immunity test - IEC/EN 6100-4-13
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Control
- Color touchscreen
- Voltage and frequency settings: Pick up and Drop out
- Time Delay Settings: Override momentary, Transfer, Generator stop, Center-OFF (Delayed Transition Type), Pre-transfer, Post-transfer, Elevator Pre-signal, Elevator Post-signal, and Load shead.
- Source failure detections: No Voltage, Under/Over Voltage, Phase missing, Voltage unbalance, Invalid frequency, and Incorrect phase sequence
- Additional Features
- LED indications for ATS, S1 and S2 status
- Programmable digital inputs/outputs
- Auto config (voltage, frequency, phase system)
- Source priority (Source 1/2, No priority)
- Manual re-transfer
- In-phase monitor (synchro check)
- Genset exercising: on-load, off-load
- In-built power meter module
- Load shedding
- Real time clock
- Event log
- Predictive maintenance
- Voltage and current harmonics measuring
- Accessories
- Auxiliary contacts for position indication
- Digital input/output modules (factory programmed)
- 12-24 VDC aux supply module for controller
- Communication modules
- Connectivity Capability
- Modbus RTU (RS-485)
- Modbus/TCP
- Profibus DP
- ProfiNet Yes
- DeviceNet
- Ethernet IP
- Applications
- Utility - Utility
- Utility - Generator
- UL short circuit withstand ratings
- Coordinated breaker WCR
- Time-based WCR
- Short-time ratings
Optional Equipment
- Optional Neutral Configuration
- Overlapping neutral
Specs
Overview
Long Name:
Cat® CS – ATS (Spec Grade)
Name:
Cat® CS Series
Brand:
Caterpillar
Status:
Current
Technical Summary
Rating Range
30 - 3000 A
Transfer Type
Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
Switch Type
Contactor
System Information
Product nodes
UL: 30-200 A, 260-1200 A, 1600-3000 A
Rated Voltage and Frequency
200-480VAC, 50/60 Hz
Phase system
Single and Three
Number of poles
2, 3 and 4
Neutral configuration
Solid neutral, Switched neutral, (Optional) Overlapping neutral
Product type
Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II) 1600-3000A only
SEE HOW Cat® CS Series COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
ATS TruOne - TruControl
Cat® CS Series
- Brand
- Caterpillar
- Status
- Current
- Rating Range
- 30 - 3000 A
- Transfer Type
- Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
- Switch Type
- Contactor
- Product nodes
- UL: 30-200 A, 260-1200 A, 1600-3000 A
- Rated Voltage and Frequency
- 200-480VAC, 50/60 Hz
- Phase system
- Single and Three
- Number of poles
- 2, 3 and 4
- Neutral configuration
- Solid neutral, Switched neutral, (Optional) Overlapping neutral
- Product type
- Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II) 1600-3000A only
Selected Model
ATS TruOne - TruControl
Cat® CG Series
- Brand
- Caterpillar
- Status
- Current
- Rating Range
- 30 - 3000 A
- Transfer Type
- Open Transition (CG), Delayed Transition (CGD)
- Switch Type
- Contactor
- Product nodes
- 30, 60, 100, 125, 160, 200, 260, 400, 600, 800, 1000, 1200, 1600, 2000, 2600, 3000A
- Rated Voltage and Frequency
- 200-480VAC, 50/60 Hz
- Phase system
- Single and Three (three phase only >600A)
- Number of poles
- 2, 3 and 4 (3 & 4 pole only >600A)
- Neutral configuration
- Optional Solid or Switched neutral
- Product type
- Open transition (I-II), Delayed Transition (I-O-II)
ATS TruOne - TruControl
Cat® CBS Series
- Brand
- Caterpillar
- Status
- Current
- Rating Range
- 100 - 3000 A
- Transfer Type
- Open Transition (CBS), Delayed Transition (CBSD), Closed Transition (CBSCT), with Bypass Isolation
- Switch Type
- Contactor
- Product nodes
- UL: Open transition 100-3000A, Delayed transition 100-3000A, Closed transition 1000-3000A
- Rated Voltage and Frequency
- 200-480VAC, 50/60 Hz
- Phase system
- Single and Three
- Number of poles
- 2, 3 and 4
- Neutral configuration
- Solid neutral, Switched neutral, Overlapping neutral (100-1200A only)
- Product type
- Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II)