D10

D10 Dozer

D10 Large Dozer

DESCRIPTION

The Cat® D10 Dozer is innovative by design — developed by a team of experts who follow a design approach that incorporates feedback from the field with industry-leading technologies to deliver a dozer that continues to advance with every model. The new D10 is no exception. It’s more efficient, so it burns less fuel. It’s more serviceable, so you’ll experience less downtime. It’s more durable, so you’ll spend less over its lifetime. And it’s more productive — so you’ll spend less time putting more profitability to your bottom line.

PERFORMANCE & EFFICIENCY

  • The torque converter with stator clutch automatically frees up the stator when torque multiplication is not required under low load, resulting in higher drivetrain efficiency for reduced fuel consumption.
  • High-horsepower reverse speeds up non-productive traveling for faster cycle times and up to 8% higher productivity.
  • The high-efficiency load-sensing hydraulic system improves hydraulic implement response and fuel efficiency.
  • The in-cab multifunction touchscreen display is the operator’s gateway to monitoring machine performance and a convenient way to modify machine parameters to tailor performance to the current task.

OPERATOR COMFORT

  • The cab is unparalleled, with enhanced ergonomics, a fully adjustable air suspension seat and and controls that are easy to access and operate.
  • The suspended undercarriage absorbs impact and reduces shock loads transferred to the operator by up to 50% for a smoother, more comfortable ride.
  • The automatic climate control system automatically adjusts heating and air conditioning controls to maintain a consistent temperature throughout the day.
  • Low-effort electronic steering, ripper and dozer controls are easily accessible and provide sure, precise maneuvering.

SAFETY

  • The operator station offers an exceptional viewing area, with a tapered hood, notched fuel tank, and narrow ripper carriage to give the operator a clear line of sight to front and rear work areas.
  • The optional 360 Vision camera system and in-cab display further enhance visibility.
  • An optional powered ladder with lockout protection improves access and egress.
  • Ground-level access, forward-hinging cab door, removed lift cylinder grease points and secondary retention on hinged belly guards provide a greater level of safety for service personnel.

PRODUCTIVITY

  • The in-cab touchscreen Information Display is larger, faster, and more powerful with increased memory and intuitive menu structure.
  • The optional Work Monitor screen collects machine data and provides real-time feedback on machine performance to optimize productivity.
  • Standard Dual Tilt allows the operator to optimize blade pitch angle, improving load control and making it possible to carry material instead of only pushing it.
  • The C27 engine automatically switches engine power settings based on direction of travel, delivering 20% more power in reverse for reduced cycle times.

TECHNOLOGY & INNOVATION

  • Standard Dual-Tilt Automated Blade Assist (ABA) increases efficiency while reducing operator workload, making use of preset blade pitch positions for the load, carry and spread portions of the cycle.
  • AutoCarry™ (optional) automates blade lift to maintain desired blade load, improve load consistency and reduce track slip.
  • Automatic Ripper Control (optional) automatically controls ripper height to limit track slip, reducing operator fatigue.
  • Optional Cat Grade Control 3D uses dual ROPS-mounted GNSS antennas and in-cylinder sensors to provide precise positioning of the cutting edge.

CAT MINESTAR™ SOLUTIONS

  • The D10 comes out of the factory ready to integrate Cat MineStar™ technology, which takes accuracy, efficiency and safety even further.
  • MineStar Command for dozing offers multiple levels of remote control and even semiautonomous operation, helping increase operator safety and comfort—as well as the productivity of the dozer fleet.
  • MineStar Terrain with Automatic Blade Control feature provides full automatics, full blade load and overcut protection integrated into the machine control system.
  • MineStar Terrain for grading monitors ore bodies, bench heights, cycle times and volume of material cut and filled. Inputs from the office tell operators where to dig or cut, how much material to move, when they’ve moved enough and even if they’ve moved too much.

SERVICEABILITY

  • Fully integrated Cat AutoLube Solution
  • Replaceable push-arm trunnion bearing inserts
  • Large engine oil sump with 50% more capacity, enabling extended oil change intervals and higher average oil quality.
  • Single plane cooling system paired with large radiator access covers for improved core cleaning.
  • Remote Flash software allows updates to be performed remotely

BLADES & ATTACHMENTS

  • The perfect match for the D10, Cat blades are aggressive in tough materials and offer superior loadability.
  • Work-tool options are available for applications requiring high-capacity blades for light materials.
  • Cat blades have the ability to resist torsional bending and distortion and offer increased wear resistance without sacrificing machine balance or performance.
  • Specialty attachments include single-shank ripper, multi-shank ripper and counterweight.

BUILT TO GO THE DISTANCE

  • Increased oil pan capacity improves oil quality and engine life.
  • The single plane cooling system reduces heat load for longer component life.
  • The frame, powertrain and main components are built to be rebuilt for a cost-effective second life of like-new performance at a fraction-of-new price.

SUSTAINABILITY

  • The D10 is designed to use less fuel, which reduces engine emissions
  • The Tier 4 Final engine reduces NOx and particulate matter, plus the engine is compatible with diesel fuel blended with lower-carbon intensity fuels such as biofuels and renewable fuels.
  • Features like extended life filters and longer maintenance intervals decrease the amount of waste contributed to the environment.
  • By rebuilding machines and components, the Cat Rebuild and Cat Reman programs preserve raw materials, conserve energy and reduce emissions. In addition, retrofits and upgrades for older machines incorporate efficiency improvements and emission reductions, and keep them in production longer to conserve energy and minimize the need for raw materials.
  • Increased commonality of systems and components, plus a reduction in unique part numbers, reduces waste and lowers owning and operating costs.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • OPERATOR ENVIRONMENT
    • Air Conditioner and Heater with Automatic Climate Control
    • Seat — Cloth with Air Suspension
    • Cab Glass — Single-Pane Tinted Safety
    • Rollover Protection System (ROPS)/Falling Object Protection (FOPS), Sound-Suppressed Cab
    • High-Definition Primary Touchscreen Display
    • Cab Access – Blade Push Arm Steps and Grab Handle
    • Visibility – Rearview Mirror
  • TECHNOLOGY
    • VIMS
    • Cat Product Link™ Elite (cellular)
    • Automated Blade Assist (ABA)
  • POWER TRAIN
    • Stator Clutch Torque Divider – Electronic Control
    • Powershift Transmission – Three-Speed Electronic Shift
    • High-Performance Single-Plane Cooling Package with Aluminum Radiator
    • Cat C27 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
  • UNDERCARRIAGE
    • Lifetime-Lubricated Rollers and Idlers
    • Suspension-Type Undercarriage
    • Track Shoe (ES): 610/710/785 mm (24, 28, 31 inch) Width
  • HYDRAULICS
    • Electronically Controlled, Load-Sensing Dozer Lift and Tilt
    • Electronically Enabled Blade – Quick Drop
    • Electronically Controlled, Load-Sensing Ripper Lift and Pitch
    • Dozer Blade – Dual Tilt, Guarded Lines
  • ELECTRICAL
    • 24V Electric Start
    • Batteries – 2× 200-Amp Hour, 12V
    • Battery Isolation - Single Pole
    • Lights – LED – 13 Positions
  • SERVICE AND MAINTENANCE
    • Replaceable Bearings – Push Arm and Ripper
    • Radiator Guard – Swing-Out Access Doors
    • Ground-Level Fast Fuel Fill
    • Ground-Level Electrical Service Station
    • Diagnostic Connector
    • Bottom Guards - Hinged with Release Catch
    • Scheduled Oil Sampling (S·O·S) Fluid Sampling Ports
    • Ecology Fluid Drains – All Compartments

Optional Equipment

  • OPERATOR ENVIRONMENT
    • Cab Glass – Dual-Pane Laminated Impact Safety
    • Visibility – Five Cameras: 360-Degree View and Ripper Camera
    • Cab Glass – High-Pressure Safety (40 psi/275 kPa)
    • MineStar™ Terrain Display
    • Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
    • Visibility – Dual Camera: Backup and Ripper
  • TECHNOLOGY
    • Autocarry™
    • Auto Ripper Control
    • Cat Product Link Elite Dual Mode (cellular + satellite)
    • Cat Grade with 3D Blade Control
    • MineStar Terrain Ready
    • MineStar Terrain with Blade Control
    • MineStar Command Remote Control Ready
  • POWER TRAIN
    • Hydraulic Cooling Fan – Automatic Reversing
  • UNDERCARRIAGE
    • Abrasion Rollers and Idlers
    • Cold Weather Rollers and Idlers
    • Carrier Roller
    • Track Links – Heavy Duty XL – Duralink
    • Track Shoe – Anti-Packing Round Hole
    • Sound-Suppression Undercarriage
    • Track Shoes : 610/710/786 mm (24/28/31 in) Width (various configurations)
  • HYDRAULICS
    • Ripper Pin Puller
  • ELECTRICAL
    • Lights – LED – Premium Package
    • Battery Isolation – Dual Pole
  • SERVICE AND MAINTENANCE
    • Ripper Lubrication – Grouped – Ground-Level Fill
    • Ground-Level – Fluid Fill and Drain Engine, Power Train, Hydraulic and Coolant
    • Sound Reduction Sealed Bottom Guards
    • Ripper Lubrication – Autolube with Ground-Level Fill
  • REAR ATTACHMENTS
    • Counterweight – Rear, 3 Weighted Plates
    • No Rear Attachment for customers who already have a rear attachment
    • Ripper – Single Shank with Pin Puller and Retrieval Hitch
    • Ripper – Single Shank with Pin Puller
    • Ripper – Multi Shank (three shank)
    • Counterweight – Rear, 4 Weighted Plates
    • Ripper – Multi Shank Deep with Pin Puller
  • BLADES
    • Semi-Universal (18.5 m3/24.2 yd3)
    • Universal (22 m3/28.7 yd3)
  • OTHER
    • Fire Suppression Ready
    • Fire Suppression Installed
  • WORKTOOLS BLADES
    • Cushion Dozer Blade
    • Coal Universal (52 m3/68 yd3)
    • Black Blade Paint
    • Abrasion Liners and Guards
    • Woodchip Universal (72.6 m3/95 yd3)
    • Reclaimation Universal (24.5 m3/32 yd3)
    • Coal Universal (46.1 m3/60.3 yd3)

Specs

Overview

Long Name:
D10 Dozer
Name:
D10
Brand:
Caterpillar
Status:
Current

Engine - U.S. EPA Tier 4 Final/EU Stage V

Engine Model
Cat® C27
Engine Power - Net SAE J1349/ISO 9249** - Forward
602 HP / 449 kW
Engine Power - Gross SAE J1995* - Forward
631 HP / 471 kW
Engine Power - Gross SAE J1995* - Reverse
766 HP / 571 kW
Engine Power - ISO 14396* - Forward
620 HP / 462 kW
Engine Power - ISO 14396* - Reverse
754 HP / 563 kW
Engine Power - Net SAE J1349/ISO 9249** - Reverse
722 HP / 538 kW
Displacement
1648 in³ / 27 l
Stroke
6 in / 152 mm
Bore
5.4 in / 137 mm
Emissions
U.S. EPA Tier 4 Final/EU Stage V
Note (1)
*Excludes all fan losses.
Note (2)
All Engine ratings apply at 1,800 rpm.
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

Engine - U.S. EPA Tier 2 Equivalent

Engine Model
Cat® C27
Engine Power - Net SAE J1349/ISO 9249** - Forward
603 HP / 450 kW
Engine Power - Net SAE J1349/ISO 9249** - Reverse
722 HP / 538 kW
Engine Power - Gross SAE J1995* - Forward
631 HP / 471 kW
Engine Power - Gross SAE J1995* - Reverse
766 HP / 571 kW
Engine Power - ISO 14396* - Forward
622 HP / 464 kW
Engine Power - ISO 14396* - Reverse
756 HP / 564 kW
Displacement
1648 in³ / 27 l
Bore
5.4 in / 137 mm
Stroke
6 in / 152 mm
Emissions
U.S. EPA Tier 2 Equivalent
Note (1)
*Excludes all fan losses.
Note (2)
All Engine ratings apply at 1,800 rpm.
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

Fuel Tank Capacities

Fuel Tank - Usable Volume
323.3 gal (US) / 1224 l
Fuel Tank - Total Volume
335.2 gal (US) / 1269 l

FLUID CAPACITIES

Cooling System Refill – Tier 4 Final Engine
46.2 gal (US) / 175 l
Engine Crankcase Sump
27.2 gal (US) / 103 l
Power Train - Total Volume
81.4 gal (US) / 308 l
Power Train - Refill Volume
74.8 gal (US) / 283 l
Final Drives (each)
12.2 gal (US) / 46 l
Track Roller Frames (each)
16.9 gal (US) / 64 l
Pivot Shaft Oil
9.5 gal (US) / 36 l
Hydraulic System Tank
32.2 gal (US) / 122 l

Weights

Operating Weight
154888 lb / 70256 kg
Shipping Weight
111739 lb / 50684 kg
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.

Hydraulic Controls

Pump Type
Variable displacement piston
Pump Output - Implement
112 gal/min / 424 l/min
Note (1)
Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
Fan Pump
21.7 gal/min / 82 l/min
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
Tilt Cylinder Flow - Rod End Flow
112 gal/min / 424 l/min
Tilt Cylinder Flow - Head End Flow
63.4 gal/min / 240 l/min
Lift Cylinder Relief Valve Setting
4061.1 psi / 28000 kPa
Tilt Cylinder Relief Valve Setting
3872.5 psi / 26700 kPa
Ripper - Lift - Relief Valve Setting
4061.1 psi / 28000 kPa
Ripper - Pitch - Relief Valve Setting
4061.1 psi / 28000 kPa
Tank Capacity
32.2 gal (US) / 122 l
Cylinder Sizing - Blade Lift - Bore
5.5 in / 140 mm
Cylinder Sizing - Blade Tilt - Bore
8.3 in / 210 mm
Cylinder Sizing - Ripper Shank Lift - Bore
8.3 in / 209.6 mm
Cylinder Sizing - Ripper Shank Angle - Bore
7.1 in / 180 mm
Cylinder Sizing - Blade Lift - Stroke
65.1 in / 1653 mm
Cylinder Sizing - Blade Tilt - Stroke
9.5 in / 241 mm
Cylinder Sizing - Ripper Shank Lift - Stroke
21.1 in / 535 mm
Cylinder Sizing - Ripper Shank Angle - Stroke
26 in / 660 mm
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.

Undercarriage

Shoe Type
Extreme Service (ES)
Width - Shoe
24 in / 610 mm
Shoes/Side
44
Grouser Height
3.7 in / 93 mm
Pitch
10.2 in / 260 mm
Ground Clearance
28.5 in / 725 mm
Track Gauge
100.4 in / 2550 mm
Length - Track on Ground
152.8 in / 3880 mm
Ground Contact Area
7347 in² / 4.74 m²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)

Steering and Brakes

Steering Type
Hydraulically Applied Multiple-Disc Steering Clutch
Brake Type
Spring Applied Multiple- Disc Brake
Brake Diameter
15.4 in / 392 mm
Brake Count
10

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

Standards

ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).

Transmission

1.0 Forward
2.5 mile/h / 4 km/h
1.5 Forward
3.4 mile/h / 5.4 km/h
2.0 Forward
4.5 mile/h / 7.2 km/h
2.5 Forward
6 mile/h / 9.6 km/h
3.0 Forward
7.8 mile/h / 12.5 km/h
1.0 Reverse
3.2 mile/h / 5.2 km/h
1.5 Reverse
4.2 mile/h / 6.7 km/h
2.0 Reverse
5.6 mile/h / 9 km/h
2.5 Reverse
7.5 mile/h / 12.1 km/h
3.0 Reverse
9.8 mile/h / 15.7 km/h
Transmission Clutch Diameter
17 in / 431.8 mm
Type
Planetary powershift

Dimensions (Approximate)

Ground Clearance*
28.5 in / 725 mm
Track Gauge
100.4 in / 2550 mm
Width - Without Trunnions - 610 mm/24 in ES
130.4 in / 3311 mm
Width - Over Trunnions
148 in / 3759 mm
Height - FOPS Cab*
162.8 in / 4134 mm
Height - Top of Stack*
171.5 in / 4356 mm
Height - ROPS/Canopy*
173.5 in / 4406 mm
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
Length - Track on Ground
152.8 in / 3880 mm
Overall Length - Basic Tractor
209.6 in / 5324 mm
Length - With SU-Blade
292 in / 7416 mm
Length - With U-Blade
305.1 in / 7750 mm
Length - With Single-Shank Ripper
278.8 in / 7081 mm
Length - With Multi-Shank Ripper
285.1 in / 7241 mm
Overall Length - SU-Blade/SS Ripper
360.6 in / 9158 mm

Blades

10SU ABR - Capacity (SAE J1265)
24.2 yd³ / 18.5 m³
10SU ABR - Width (over end bits)
194.5 in / 4940 mm
10SU ABR - Height
83.5 in / 2120 mm
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in / 507.47 mm
10SU ABR - Digging Depth - Blade Pitch: Nominal
25.23 in / 640.87 mm
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.08 in³ / 764.12 mm
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.14 in / 1680 mm
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.86 in / 1368 mm
10SU ABR - Ground Clearance - Maximum Tilt LH
56.3 in / 1430 mm
10SU ABR - Ground Clearance - Maximum Tilt RH
56.3 in / 1430 mm
10U ABR - Capacity (SAE J1265)
28.7 yd³ / 22 m³
10U ABR - Width (over end bits)
207.1 in / 5260 mm
10U ABR - Height
83.5 in / 2120 mm
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
19.98 in / 507.5 mm
10U ABR - Digging Depth - Blade Pitch: Nominal
60 in / 640.9 mm
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
30.1 in / 764.1 mm
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
66.1 in / 1680 mm
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
53.9 in / 1368 mm
10U ABR - Ground Clearance - Maximum Tilt LH
60.8 in / 1545 mm
10U ABR - Ground Clearance - Maximum Tilt RH
60.8 in / 1545 mm
10U ABR - Weights - Blade Weight*
23585 lb / 10698 kg
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
154888 lb / 70256 kg
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

Ripper - Single Shank

Maximum penetration force * (shank vertical)
49233 lbf / 219 kN
Maximum penetration depth (standard tip)
59.2 in / 1504 mm
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
36 in / 912 mm
Weight
14209 lb / 6445 kg
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

Ripper - Single Shank, Deep Ripping

Maximum penetration force * (shank vertical)
53055 lbf / 236 kN
Maximum penetration depth (standard tip)
78.3 in / 1988 mm
Weight
14548 lb / 6599 kg
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

SEE HOW D10 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Large Dozers
D10
D10 Large Dozer
Brand
Caterpillar
Status
Current
Engine Model
Cat® C27
Displacement
1648 in³ / 27 l
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms.
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
Operating Weight
154888 lb / 70256 kg
Pump Type
Variable displacement piston
Shoe Type
Extreme Service (ES)
Width - Shoe
24 in / 610 mm
Shoes/Side
44
Grouser Height
3.7 in / 93 mm
Pitch
10.2 in / 260 mm
Track Gauge
100.4 in / 2550 mm
Length - Track on Ground
152.8 in / 3880 mm
Ground Contact Area
7347 in² / 4.74 m²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
1.0 Forward
2.5 mile/h / 4 km/h
2.0 Forward
4.5 mile/h / 7.2 km/h
3.0 Forward
7.8 mile/h / 12.5 km/h
1.0 Reverse
3.2 mile/h / 5.2 km/h
2.0 Reverse
5.6 mile/h / 9 km/h
3.0 Reverse
9.8 mile/h / 15.7 km/h
Ground Clearance*
28.5 in / 725 mm
Maximum penetration force * (shank vertical)
53055 lbf / 236 kN
Maximum penetration depth (standard tip)
78.3 in / 1988 mm
Large Dozers
D9
D9 Large Dozer
Brand
Cat
Status
Current
Engine Model
Cat® C18
Displacement
1106 in³ / 18.1 l
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
Note (2)
Variable speed, hydraulically driven, dual braking system, three-roller fairlead.
Note (3)
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Operating Weight
110225 lb / 49988 kg
Pump Type
Piston-type geared to flywheel
Shoe Type
Extreme Service
Width - Shoe
24 in / 610 mm
Shoes/Side
43
Grouser Height
3.3 in / 84 mm
Pitch
9.4 in / 240 mm
Track Gauge
88.6 in / 2250 mm
Length - Track on Ground
136.6 in / 3470 mm
Ground Contact Area
45.6 ft² / 4.23 m²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)
ROPS
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Sound (1)
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurement was conducted with the cab doors and the cab windows closed. NOTE: The dynamic operator sound pressure level uncertainty is +/-2 dB(A).
1.0 Forward
2.2 mile/h / 3.5 km/h
2.0 Forward
3.9 mile/h / 6.3 km/h
3.0 Forward
6.8 mile/h / 11 km/h
1.0 Reverse
2.7 mile/h / 4.4 km/h
2.0 Reverse
4.8 mile/h / 7.8 km/h
3.0 Reverse
8.4 mile/h / 13.6 km/h
Ground Clearance*
18.1 in / 459 mm
Maximum penetration force * (shank vertical)
38667 lbf / 172 kN
Maximum penetration depth (standard tip)
68 in / 1727 mm
Large Dozers
D11
D11
Brand
Caterpillar
Status
Current
Engine Model
Cat® C32
Displacement
1959 in³ / 32.1 l
Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Operating Weight
229800 lb / 104236 kg
Pump Type
Variable displacement piston pump
Shoe Type
Extreme Service
Width - Shoe
28 in / 710 mm
Shoes/Side
41
Grouser Height
4 in / 102 mm
Pitch
12.5 in / 318 mm
Track Gauge
114 in / 2896 mm
Length - Track on Ground
175 in / 4444 mm
Ground Contact Area
9781 in² / 6.3 m²
Track Rollers/Side
8
Number of Carrier Rollers
1 per side (optional)
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Note
*Includes grouser height for total dimensions on hard surfaces.
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
1.0 Forward
2.5 mile/h / 4 km/h
2.0 Forward
4.4 mile/h / 7 km/h
3.0 Forward
7.6 mile/h / 12.2 km/h
1.0 Reverse
3 mile/h / 4.8 km/h
2.0 Reverse
5.3 mile/h / 8.5 km/h
3.0 Reverse
9.1 mile/h / 14.7 km/h
Ground Clearance*
31.4 in / 798 mm
Maximum penetration force * (shank vertical)
66110 lb / 294 kN
Maximum penetration depth (standard tip)
85.5 in / 2172 mm