H130 GC S

H130 GC S Hammer

H130GCs Hammer

DESCRIPTION

Cat® Hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC S Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Reliable and Durable Design

  • Cat® Hammers use up to 25 percent less fuel and are up to 27 percent more efficient.
  • The standard silencing feature, indicated by the 'S' in the nomenclature, protects your operator and everyone near the jobsite.
  • It also allows you to work on jobsites where noise is regulated.
  • The power cell is protected by the fully enclosed housing.
  • The housing also prevents dust and debris from entering the bushing.
  • Enjoy fast service times and lower owning and operating costs with the simplified design.
  • Choose between top and side mount options to match your application.
  • Achieve consistent power and production over time with the gas fired design.
  • Cat Hammers are designed to work with our machines as a total solution and provide seamless hydraulic connectivity for maximum performance.
  • The buffering system reduces vibration to the machine, improves noise suppression, and improved hammer durability.

Easy to Maintain

  • Achieve up to 18 percent lower maintenance costs with Cat® Hammers.
  • Easy and quick access to maintenance areas ensures the hammer always operates at its peak.
  • Spend more time working and less time on service.
  • Greasing can be performed quickly from one standing-height grease point.
  • Service the lower bushing in the field using simple hand tools.
  • Verify the gas charge of the hammer without removing it from your machine.
  • With the standard auto-lube system, your hammer is greased while it runs - saving you time and protecting your investment.

Easy to Operate

  • Protect against blank firing with automatic shut off.
  • This feature helps prevent damage to your machine and premature damage to your hammer by detecting when the hammer is not in contact with material.
  • Operator feel, and control is improved with an interlocking quad wear system which guides and supports the front head.
  • Select between high blow frequency and maximum power to get the performance you need to suit your application.
  • Easily adjust the piston stroke between long and short stroke positions to match application requirements.

You Are Supported

  • Go where the job takes you. The Cat® Dealer Network is there to help when you need it.
  • Rely on Caterpillar for complete system support. Receive parts, service, and technical assistance for your machine, hammer, and hydraulics from a single source.

  • Specs
  • Docs

Specs

Overview

Long Name:
H130 GC S Hammer
Name:
H130 GC S
Brand:
Caterpillar
Status:
Current
Impact Energy Class
4425 ft-lb / 6000 J
Blows per Minute
350-700
Maximum Operating Weight
5471.4 lb / 2487 kg
Minimum Operating Weight
5392 lb / 2451 kg
Maximum Carrier Weight
70547 lb / 32 t
Minimum Carrier Weight
55115 lb / 25 t
Tool Shaft Diameter
-5.91 in / 150 mm
Maximum Operating Pressure
2610 psi / 18000 kPa
Minimum Operating Pressure
2320 psi / 16000 kPa
Rated Flow - Maximum
51 gal/min / 191 l/min
Rated Flow - Minimum
43 gal/min / 161 l/min

SEE HOW H130 GC S COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

GC Hammers
H130 GC S
H130GCs Hammer
Brand
Caterpillar
Status
Current
Impact Energy Class
4425 ft-lb / 6000 J
Blows per Minute
350-700
Maximum Operating Weight
5471.4 lb / 2487 kg
Minimum Operating Weight
5392 lb / 2451 kg
Maximum Carrier Weight
70547 lb / 32 t
Minimum Carrier Weight
55115 lb / 25 t
Tool Shaft Diameter
-5.91 in / 150 mm
Maximum Operating Pressure
2610 psi / 18000 kPa
Minimum Operating Pressure
2320 psi / 16000 kPa
Rated Flow - Maximum
51 gal/min / 191 l/min
Rated Flow - Minimum
43 gal/min / 161 l/min
GC Hammers
H120 GC S
H120GCs Hammer
Brand
Caterpillar
Status
Current
Impact Energy Class
2950 ft-lb / 4000 J
Blows per Minute
400-800
Maximum Operating Weight
3927 lb / 1785 kg
Minimum Operating Weight
3859 lb / 1754 kg
Maximum Carrier Weight
55115 lb / 25 t
Minimum Carrier Weight
39683 lb / 18 t
Tool Shaft Diameter
5.31 in / 135 mm
Maximum Operating Pressure
2610 psi / 18000 kPa
Minimum Operating Pressure
2320 psi / 16000 kPa
Rated Flow - Maximum
40 gal/min / 151 l/min
Rated Flow - Minimum
33 gal/min / 125 l/min
GC Hammers
H160 GC S
H160GCs Hammer
Brand
Cat
Status
Current
Impact Energy Class
7500 ft-lb / 10170 J
Blows per Minute
200-450
Maximum Operating Weight
5471.4 lb / 2487 kg
Minimum Operating Weight
6810 lb / 3090 kg
Maximum Carrier Weight
99200 lb / 45 t
Minimum Carrier Weight
72700 lb / 33 t
Tool Shaft Diameter
4.64 in / 118 mm
Maximum Operating Pressure
2610 psi / 18000 kPa
Minimum Operating Pressure
2320 psi / 15985 kPa
Rated Flow - Maximum
68 gal/min / 260 l/min
Rated Flow - Minimum
50 gal/min / 190 l/min