P214 Secondary Pulverizer
P214 Secondary Pulverizer
Cat® P214 Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.
DESCRIPTION
Cat P200 Series Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.Cat® Pulverizers are perfectly matched to Cat excavators so you can deliver productive concrete demolition without compromising performance or machine health. Cat P200 Series Secondary Pulverizers are designed to reduce the size of debris, clear up a job site, and separate concrete from rebar at ground level after demolition.HIGH PERFORMANCE
- Cat pulverizer jaws are designed to cut through material quickly to enhance your machine’s overall operating efficiency and help reduce fuel consumption.
- The oversized cylinder on the non-rotating secondary pulverizer delivers a strong crushing force to reduce concrete and separate rebar.
- The Speed Booster valve actively balances speed and power, delivering fast cycle times and strong closing force to help increase productivity.
EASY TO MAINTAIN
- Replaceable wear parts can be swapped quickly in the field and do not require surface welding to help reduce service time.
- Daily wear parts inspection and grease points are accessible from the ground with the pulverizer still mounted on the machine.
- Safely perform maintenance with easy access through one inspection panel.
- Hydraulic components are shielded from damage inside the housing, helping decrease downtime on the job site.
RELIABILITY AND DURABILITY
- Cat pulverizers are manufactured with high-strength, abrasion-resistant steel, especially in excessive wear areas.
- Reinforced cylinder rod hinges on the moveable jaw are designed to help boost durability and life of the pulverizer.
- The C-shaped cylinder guard provides extra protection against concrete demolition.
- Cat pulverizers have a versatile use across demolition applications, making them your choice for a wide variety of job sites.
BOOST EFFICIENCY AND PRODUCTIVITY WITH INTEGRATED TECHNOLOGIES
- Never waste time looking for your attachments again. Cat asset tracking is available on all pulverizers.
- Track your entire fleet of attachments and machines from one source. Pulverizers with asset tracking can be viewed within VisionLink®.
- Keep your assets secure. Pulverizers with an asset tracker send an alert if they leave an easy-to-set-up site boundary.
VERSATILITY AND CONVENIENCE WITH COUPLERS
- Share pulverizers and other attachments of the same size class across multiple machines by adding a quick coupler.
- Significantly reduce the time it takes to switch attachments when using a quick coupler.
- Quick couplers add a new level of safety to your job site with the ability to switch attachments while the operator stays in the cab with built-in redundancies to keep your attachments secure in the event of a pressure loss.
- A variety of couplers are available to suit your specific needs:
- Cat Pin Grabber Couplers – dedicated pin system
- CW Dedicated Couplers – wedge-style, dedicated system
- S Type Couplers – wedge-style, dedicated system
- Hydraulic Connecting CW Couplers – hydraulic connecting version of the CW coupler with instant hydraulic capability upon connection
- Hydraulic Connecting S Type Couplers – hydraulic connecting version of the S type coupler with instant hydraulic capability upon connection
- Specs
- Docs
Specs
Overview
Long Name:
P214 Secondary Pulverizer
Name:
P214 Secondary Pulverizer
Brand:
Caterpillar
Status:
Current
Performance
Cycle Time - Open
1.6 s / 1.6 s
Cycle Time - Close
1 s / 1 s
Crushing Force - Primary Cutter
264 Sh Ton / 2345 kN
Crushing Force - Tip
74 Sh Ton / 655 kN
Crushing Force - Primary Tooth
148 Sh Ton / 1320 kN
Hydraulic Requirements
Jaw Circuit - Max. Oil Pressure
4786 psi / 33000 kPa
Jaw Circuit - Max. Oil Flow
40 gal/min / 150 l/min
Dimensions - Jaw
Jaw Depth
25.6 in / 650 mm
Cutter Length
4.5 in / 115 mm
Jaw Opening - Maximum
34.8 in / 885 mm
Jaw Width - Fixed
21.9 in / 555 mm
Jaw Width - Moveable
12.2 in / 310 mm
Dimensions - Housing + Jaw
Length
87 in / 2210 mm
Height
51.6 in / 1310 mm
Width
21.9 in / 555 mm
Weight
Weight - Housing, Jaw and Bracket
3285 lb / 1490 kg
Recommended Carrier Weight
Excavator Minimum
14000 kg (30900 lb)
Excavator Maximum
19000 kg (41900 lb)
SEE HOW P214 Secondary Pulverizer COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Secondary Pulverizer
P214 Secondary Pulverizer
- Brand
- Caterpillar
- Status
- Current
- Cycle Time - Open
- 1.6 s / 1.6 s
- Cycle Time - Close
- 1 s / 1 s
- Crushing Force - Primary Cutter
- 264 Sh Ton / 2345 kN
- Crushing Force - Tip
- 74 Sh Ton / 655 kN
- Crushing Force - Primary Tooth
- 148 Sh Ton / 1320 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 40 gal/min / 150 l/min
- Jaw Depth
- 25.6 in / 650 mm
- Cutter Length
- 4.5 in / 115 mm
- Jaw Opening - Maximum
- 34.8 in / 885 mm
- Jaw Width - Fixed
- 21.9 in / 555 mm
- Jaw Width - Moveable
- 12.2 in / 310 mm
- Length
- 87 in / 2210 mm
- Height
- 51.6 in / 1310 mm
- Width
- 21.9 in / 555 mm
- Weight - Housing, Jaw and Bracket
- 3285 lb / 1490 kg
- Excavator Minimum
- 14000 kg (30900 lb)
- Excavator Maximum
- 19000 kg (41900 lb)
Selected Model
Secondary Pulverizer
P224 Secondary Pulverizer
- Brand
- Cat
- Status
- Current
- Cycle Time - Open
- 1.9 s / 1.9 s
- Cycle Time - Close
- 1.3 s / 1.3 s
- Crushing Force - Primary Cutter
- 409 Sh Ton / 3640 kN
- Crushing Force - Tip
- 129 Sh Ton / 1145 kN
- Crushing Force - Primary Tooth
- 224 Sh Ton / 1990 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 74 gal/min / 280 l/min
- Jaw Depth
- 33.3 in / 845 mm
- Cutter Length
- 7.9 in / 200 mm
- Jaw Opening - Maximum
- 46.3 in / 1175 mm
- Jaw Width - Fixed
- 26 in / 660 mm
- Jaw Width - Moveable
- 15 in / 380 mm
- Length
- 107.3 in / 2725 mm
- Height
- 62.4 in / 1585 mm
- Width
- 26 in / 660 mm
- Weight - Housing, Jaw and Bracket
- 5952 lb / 2700 kg
- Excavator Minimum
- 24000 kg (52900 lb)
- Excavator Maximum
- 35000 kg (77200 lb)
Secondary Pulverizer
P218 Secondary Pulverizer
- Brand
- Cat
- Status
- Current
- Cycle Time - Open
- 1.8 s / 1.8 s
- Cycle Time - Close
- 1.2 s / 1.2 s
- Crushing Force - Primary Cutter
- 351 Sh Ton / 3125 kN
- Crushing Force - Tip
- 107 Sh Ton / 955 kN
- Crushing Force - Primary Tooth
- 192 Sh Ton / 1710 kN
- Jaw Circuit - Max. Oil Pressure
- 4786 psi / 33000 kPa
- Jaw Circuit - Max. Oil Flow
- 59 gal/min / 225 l/min
- Jaw Depth
- 30.3 in / 770 mm
- Cutter Length
- 5.9 in / 150 mm
- Jaw Opening - Maximum
- 42.1 in / 1070 mm
- Jaw Width - Fixed
- 24.4 in / 620 mm
- Jaw Width - Moveable
- 13.2 in / 335 mm
- Length
- 97 in / 2465 mm
- Height
- 57.1 in / 1450 mm
- Width
- 24.4 in / 620 mm
- Weight - Housing, Jaw and Bracket
- 4409 lb / 2000 kg
- Excavator Minimum
- 18000 kg (39700 lb)
- Excavator Maximum
- 25000 kg (55100 lb)