SE60 VT XW Tamper Bar Screed

SE60 VT XW Screed

SE60 VT XW

DESCRIPTION

The SE60 VT XW delivers extremely tight mat textures with high densities. It utilizes rear-mounted extenders, tamper bars, vibratory screed plates and has a paving range of 3.0 m to 10.0 m (9' 10" - 33'). It excels on interstates, highways, airport runways and other wide-width applications.

Fast Heating

The 70 kW, tractor integrated generator combined with the technologically advanced screed heating system, ensures fast, even heat distribution. The 15 minute heating time at standard widths can lead to more daily production and lower fuel consumption due to less time waiting for the screed plates to reach the preset temperature. At maximum widths screed plate heating occurs in as little as 25 minutes.

Tamper Bars

Tamper bars efficiently tuck material under the screed plates to provide precompaction. Adjustable starting and stopping ramp rates maintain an optimal mat finish, while an auto-speed setting accommodates changes in paving speed.

Exclusive Monitoring

The exclusive generator system monitors heating elements for failure conditions in order to help plan for scheduled service events. Furthermore, temperature zone monitoring allows heating to continue in the event of a sensor failure and warning indicators are delivered through the LCD displays.

More Control

The extenders are equipped with 2 speed ranges and proportional control for better performance around obstacles. Pendant controls located on the extenders enable operators to perform functions remotely. The conveyor ratio adjustment can be made from the screed control panel when utilizing the 2-sensor feeder system in order to maintain optimal material height in front of the screed.

Integrated Cat Grade Control

Factory integrated Cat Grade Control allows the crew to operate from either of the tractor or screed consoles. A split screen mode enables the screed operators to work from a single side or from each side of the screed. This is especially helpful when training new operators and when the crew is tasked with multiple job site duties.

Simple Adjustment

Power controls for crown, slope, and height allow for on-the-go adjustment at standard and maximum widths. The exclusive trailing edge screed plate adjusters as well as machined screed frames help optimize plate life and simplify leveling procedures.

Easy Service, Increased Durability

Water resistant consoles and LCD displays ensure performance in adverse conditions and the million-cycle keypad switches and oil-bath vibratory pods provide longterm reliability. The heating elements slide out for easy replacement.

Extra Wide Paving Packages

The SE60 V XW can be equipped with extension packages that pave up to 10.0 m (33'). Power controls for crown, slope, and extension height provide easy adjustment for better mat textures and quality. An exclusive fastening system utilizes power controls to attach the extensions, eliminating the need for additional lifting devices.

  • Specs
  • Docs

Specs

Overview

Long Name:
SE60 VT XW Screed
Name:
SE60 VT XW Tamper Bar Screed
Brand:
Caterpillar
Status:
Current

Weights

Standard Weight
9898 lb / 4490 kg

Operating Specifications

Standard Paving Range
3.0 m - 6.0 m (10' - 19' 6")
Maximum Paving Width
33 ft / 10 m
Maximum Paving Depth
12 in / 305 mm
Extender Slope Range
-3% to +5%
Tamper Speed Range
700 to 1800 rpm
Vibrator Speed Range
0 - 3000 vpm
Crown Range
-2% to +5% per side

Dimensions

Screed Plate Width - Front to Back
16 in / 407 mm
Transport Length - Tractor and Screed
22.6 ft / 6910 mm
Transport Width - Endgates Folded
9.85 ft / 3 m

Operating Specifications

Heating Time - Standard Width
15 minutes

Dimensions

Length - Front to Back, Endgates Attached
98 in / 2505 mm
Length - Front to Back, Endgates Removed
76 in / 1940 mm

Operating Specifications

Heating Time - Maximum Width
25 minutes

SEE HOW SE60 VT XW Tamper Bar Screed COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Screeds
SE60 VT XW Tamper Bar Screed
SE60 VT XW
Brand
Caterpillar
Status
Current
Standard Weight
9898 lb / 4490 kg
Standard Paving Range
3.0 m - 6.0 m (10' - 19' 6")
Maximum Paving Width
33 ft / 10 m
Maximum Paving Depth
12 in / 305 mm
Extender Slope Range
-3% to +5%
Crown Range
-2% to +5% per side
Screed Plate Width - Front to Back
16 in / 407 mm
Heating Time - Standard Width
15 minutes
Length - Front to Back, Endgates Attached
98 in / 2505 mm
Length - Front to Back, Endgates Removed
76 in / 1940 mm
Heating Time - Maximum Width
25 minutes
Screeds
SE60 V XW Vibratory Screed
SE60 V XW
Brand
Caterpillar
Status
Current
Standard Weight
8973 lb / 4070 kg
Standard Paving Range
3.0 to 6.0 m (9' 10"- 19' 6")
Maximum Paving Width
33 ft / 10 m
Maximum Paving Depth
12 in / 305 mm
Extender Slope Range
-3% to +10%
Crown Range
-4% to +10%
Screed Plate Width - Front to Back
16 in / 407 mm
Heating Time - Standard Width
15 minutes
Length - Front to Back, Endgates Attached
98 in / 2499 mm
Length - Front to Back, Endgates Removed
76 in / 1940 mm
Heating Time - Maximum Width
25 minutes
Screeds
SE60 V Asphalt Screed
SE60 V Asphalt Screed
Brand
Caterpillar
Status
Current
Standard Weight
7826 lb / 3550 kg
Standard Paving Range
3.0 - 6.0 m (9' 10" - 19' 6"')
Maximum Paving Width
24.5 ft / 7.45 m
Maximum Paving Depth
12 in / 305 mm
Extender Slope Range
-3% to +10%
Crown Range
-4% to +10%
Screed Plate Width - Front to Back
16 in / 407 mm
Heating Time - Standard Width
15 minutes
Length - Front to Back, Endgates Attached
94 in / 2394 mm
Length - Front to Back, Endgates Removed
68 in / 1730 mm
Heating Time - Maximum Width
25 minutes