TL642 w/Stabilizers

TL642 w/StabilizersTelehandler

TL642 w/Stabilizers

DESCRIPTION

Cat Telehandlers offer performance and versatility.The TL642 is a highly versatile machine, designed to deliver maximum performance with traditional Cat reliability, durability and productivity in the toughest working conditions.

Intuitive Control Layout

All day operator comfort and efficiency is ensured through our easier to use control layout.

Easier Access

Cab entry and exit is both easier and more convenient due to the well placed handholds.

Enhanced Visibility

The TL-Series cab has improved visibility due to the use of advanced virtual design techniques.

Joystick Control

The joystick allows three simultaneous boom functions enabling application customization for more than a dozen configurations.

Steering Modes

The TL642 offers three steering modes (two wheel, crab and 4-wheel steer) to allow an operator to more easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.

Features

  • Operator Protection

    The machine provides full operator security with OROPS or EROPS protection.

  • Flow Sharing

    Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.

  • Lift Height

    The TL642 can pick and place bricks and materials to a maximum height of 42 ft. (12.8 m).

  • Reach

    Job site obstacles present challenges demanding a machine to place loads at greater distances - the TL642 delivers.

  • Maneuverability

    The TL642 offers improved maneuverability, allowing it to work productively in confined areas.

  • Transmission

    Th TL642 features a Cat Power-shift transmission.

  • Quick Coupler

    A manual IT coupler is standard on the TL-Series machines. For optimum versatility, all machines are equipped with the hydraulic quick coupler, allowing the operator to more easily change non-hydraulic work tools without leaving the cab.

  • Hydraulic Services

    Machines are equipped with Auxiliary Hydraulic services, allowing the use of hydraulically operated work tools. All TL-Series telehandlers are equipped with a single auxiliary hydraulic service and continuous hydraulic flow.

  • Work Tools

    A wide range of work tools are available to meet most job site applications. Caterpillar Telehandler Work Tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value.

    • General Purpose Bucket (1.0 m3/1.3 yd3)
    • Light Materials Bucket (2.0 m3/2.6 yd3, 2.5 m3/3.25 yd3, 3.0 m3/3.90 yd3)
    • Material Handling Bucket (1.5 m3/1.95 yd3, )
    • Multi Purpose Bucket (1.0 m3/1.3 yd3)
    • Grapple Bucket (0.85 m3/1.1 yd3)
    • Fixed Carriage
    • Rotate Carriage
    • Sideshift Carriage
    • Pallet Forks
    • Block Forks
    • Lift Hook
    • Truss Boom
    Contact your Cat dealer for additional work tool options.

  • Tires

    A wide range of tire options enables the machine to be configured to achieve optimum job site performance.

  • Ease of Access

    Cost of ownership starts with ease of service. All Cat Telehandler service points are accessible and major components are at ground level due to overall machine design.

  • Daily Maintenance

    Routine daily maintenance is now reduced to checking fluid levels and a walkaround inspection.

  • Service Intervals

    Engine oil, filter changes and routine lubrication are now only required every 500 hours.

  • Reduced Componentry

    With the reduction in the number of filters and extended service intervals, operating costs are the lowest in the industry.

  • Equipment Protection Plan

    Designed to enhance your telehandler ownership experience with comprehensive coverage and peace of mind.

  • Access

    All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are accessible and major components are at ground level due to the overall machine design. A cab mounted service point allows access to the fuel fill, hydraulic oil fill, washer bottle, fuse box and cab air filter for routine checks.

  • Selection

    Make detailed comparisons before you buy. Your Cat Dealer can give you precise answers to your questions.

  • Purchase

    Look at the value that the TL642 telehandler will offer you. Consider all the flexible financing options your Cat Dealer offers as well as day-to-day operating costs.

  • Operation

    Improving operating techniques can boost your profits. Your Cat Dealer has literature and other tools to help increase your productivity.

  • Replacement

    Repair, rebuild or replace? Your Cat Dealer can help you evaluate the cost involved so you can make the right choice.

  • Product Support

    You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs.

  • Easy Financing

    Your Cat Dealer can provide a financing package to meet your needs.

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • TELESCOPIC BOOM
    • Boom angle indicator
  • ELECTRICAL
    • Alternator, 60 amp, 12 volt
    • Battery, 12 volt, 1000 CCA
    • Horn
    • Alarm, backup
  • OPERATOR STATION
    • Canopy, ROPS/FOPS
    • Joystick, single electronic
    • Adjustable joystick wristrest
    • Low step, grab bars for easy entry
    • Seat - vinyl, suspension with Cat logo
    • Steering wheel spinner knob
    • Floor mat - heavy duty
    • Left side rear view mirror
    • Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
    • Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
    • Park Brake with indicator light
    • Steering Wheel with Cat logo
    • Cat keys and locks
    • Brakes - wet disc service
  • POWER TRAIN
    • Engine,Cat® C3.6L (73.7 hp)
    • Thermal starting aid
    • Transmission, 4-speed forward, 3-speed reverse
    • Cat filters, hoses and couplings
    • Axles - Dana
    • Steering - 4 wheel
    • Parking brake with indicator light
    • Drive - 4 wheel
  • STRUCTURE
    • Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
    • Cat IT Coupler
  • ANTI-FREEZE
    • Coolant - Anti-freeze, 50/50 Mix
  • TIRES
    • Tires - 370/75-28 Duraforce Air
  • OTHER EQUIPMENT
    • Integrated lift and tie down points
    • Standard Cat color paint
    • Auxillary hydraulics for auxillary attachments (one function)

Optional Equipment

  • TELESCOPIC BOOM
    • Hydraulic IT Coupler (includes Auxiliary Electrics)
  • ELECTRICAL
    • Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
    • Engine heater block
    • Heater - open cab
    • Road Light Group -- Headlights, Brake Lights, Turn Signals
  • OPERATOR STATION
    • Air conditioning
    • Auxiliary hydraulics for Hydraulic Work Tools (one function)
    • Single Joystick - with Rocker Switch
    • EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
    • Skylight Wiper
    • Brick Guard - Top and front.
  • TIRES
    • Tires - 13.00-24 12PR Foam
    • Tires - 13.00-24 16PR Air
    • Tires - 370/75-28 Duraforce Foam Fill
    • Tires - 370/75-28 Non-Marking Air
    • Tires - 315/95-28 Telemaster Solid
  • OTHER EQUIPMENT
    • Fenders
    • Tow Hook - Pintle Type
    • Instant Hook - 4000 lb capacity, boom head mounted winch
    • Outriggers
    • Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
  • WORK TOOLS
    • Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
    • Carriage - side shift, 50 in. (available from factory)
    • Lifting Hook - fork mounted (available from factory)
    • Truss Broom
    • Carriage - standard tilt, 50 in. (available from factory)
    • Carriage - wide tilt, 72 in. (available from factory)
    • Carriage - standard rotate, 50 in. (available from factory)
    • Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
    • Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
    • Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
    • Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
    • Bucket - General Purpose 1.3 Cu. Yd.
    • Bucket - Material Handling 1.95 Cu. Yd.
    • Bucket - Multi-Purpose, 1.3 Cu. Yd.

Specs

Overview

Long Name:
TL642 w/StabilizersTelehandler
Name:
TL642 w/Stabilizers
Brand:
Cat
Status:
Current

Engine

Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 HP / 55 kW
Note
Meets U.S. EPA Tier 4 Final emission standards.

Weights

Operating Weight
22928 lb / 10400 kg

Operating Specifications

Rated Load Capacity
6500 lb / 2948 kg
Maximum Lift Height
42 ft / 12.8 m
Load at Maximum Height - Stabilizers Down
6500 lb / 2948 kg
Maximum Forward Reach
30 ft / 9.1 m
Load at Maximum Reach - Stabilizers Down
1700 lb / 771 kg
Top Travel Speed
19 mile/h / 31 km/h

Dimensions

Height
8 ft / 2430 mm
Width
8 ft / 2470 mm
Wheel Base
11.25 ft / 3430 mm
Length - Fork Face
18.5 ft / 5639 mm
Ground Clearance
17 in / 432 mm
Turning Radius - Over Tires
12 ft / 3658 mm

Tires

Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam

Hydraulic System

Pump Type
Single-section

Service Refill Capacities

Fuel Tank
38.3 gal (US) / 145 l
Hydraulic System
42 gal (US) / 158 l

Boom Performance

Boom Up
15.5 s / 15.5 s
Boom Down
10.7 s / 10.7 s
Tele In
11.8 s / 11.8 s
Tele Out
17 s / 17 s
Drawbar Pull - Basic
20670 lb / 92 kN

Braking System

Parking Brake
Spring-applied hydraulic release on front axle

Brakes

Features
Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle

Operator Station

Features
Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab

Instrumentation

Features
Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge

Work Tools

Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Side Shift
50 in / 1270 mm
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt
50 in / 1270 mm
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning
50 in / 1270 mm
Pallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)

SEE HOW TL642 w/Stabilizers COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Telehandlers
TL642 w/Stabilizers
TL642 w/Stabilizers
Brand
Cat
Status
Current
Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 HP / 55 kW
Note
Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight
22928 lb / 10400 kg
Rated Load Capacity
6500 lb / 2948 kg
Maximum Lift Height
42 ft / 12.8 m
Maximum Forward Reach
30 ft / 9.1 m
Top Travel Speed
19 mile/h / 31 km/h
Height
8 ft / 2430 mm
Width
8 ft / 2470 mm
Wheel Base
11.25 ft / 3430 mm
Length - Fork Face
18.5 ft / 5639 mm
Ground Clearance
17 in / 432 mm
Turning Radius - Over Tires
12 ft / 3658 mm
Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam
Fuel Tank
38.3 gal (US) / 145 l
Hydraulic System
42 gal (US) / 158 l
Boom Up
15.5 s / 15.5 s
Boom Down
10.7 s / 10.7 s
Tele In
11.8 s / 11.8 s
Tele Out
17 s / 17 s
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Side Shift
50 in / 1270 mm
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt
50 in / 1270 mm
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning
50 in / 1270 mm
Pallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Selected Model
Telehandlers
TL642
TL642 Telehandler
Brand
Cat
Status
Current
Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 hp / 55 kW
Note
Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight
22002 lb / 9980 kg
Rated Load Capacity
6500 lb / 2948 kg
Maximum Lift Height
42 ft / 12.8 m
Maximum Forward Reach
30 ft / 9.1 m
Top Travel Speed
19 mile/h / 31 km/h
Height
8 ft / 2430 mm
Width
8 ft / 2470 mm
Wheel Base
11.25 ft / 3430 mm
Length - Fork Face
18.5 ft / 5639 mm
Ground Clearance
17 in / 432 mm
Turning Radius - Over Tires
12 ft / 3658 mm
Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
13.00-24 16PR Air
Optional (4)
13.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam
Fuel Tank
38.3 gal (US) / 145 l
Hydraulic System
42 gal (US) / 158 l
Boom Up
15 s / 15 s
Boom Down
10.3 s / 10.3 s
Tele In
9.5 s / 9.5 s
Tele Out
16.3 s / 16.3 s
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Side Shift
50 in / 1270 mm
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt
50 in / 1270 mm
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning
50 in / 1270 mm
Pallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
More Details
Telehandlers
TL943
TL943 Telehandler
Brand
Cat
Status
Current
Engine Model
Cat® C3.6L
Gross Power - Basic
73.7 hp / 55 kW
Note
*Meets U.S. EPA Tier 4 Final emission standards.
Operating Weight
25750 lb / 11680 kg
Rated Load Capacity
9000 lb / 4082 kg
Maximum Lift Height
43 ft / 13.1 m
Maximum Forward Reach
31 ft / 9.4 m
Top Travel Speed
18 mile/h / 29 km/h
Height
8.16 ft / 2490 mm
Width
8 ft / 2470 mm
Wheel Base
11.25 ft / 3343 mm
Length - Fork Face
20.5 ft / 6248 mm
Ground Clearance
17 in / 432 mm
Turning Radius - Over Tires
12 ft / 3.7 m
Standard
370/75-28 Duraforce Air
Optional (1)
370/75-28 Duraforce Foam Fill
Optional (2)
315/95-28 Telemaster Solid
Optional (3)
14.00-24 16PR Air
Optional (4)
14.00-24 12PR Foam
Optional (5)
370/75-28 Non-Marking Air
Optional
370/75-28 Non-Marking Foam
Fuel Tank
38 gal (US) / 145 l
Hydraulic System
47 gal (US) / 177 l
Boom Up
9.9 s / 9.9 s
Boom Down
8.5 s / 8.5 s
Tele In
14.6 s / 14.6 s
Tele Out
14.5 s / 14.5 s
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Carriages - Side Shift
50 in / 1270 mm
Pallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Standard Tilt
50 in / 1270 mm
Lumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Carriages - Dual Fork Positioning
50 in / 1270 mm
Pallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
More Details