NEW | 2025 CAT 260-05L901603
LISTING DETAILS
Model
260
Product Family
SKID STEERS
Manufacturer
CAT
Year
2025
Serial Number
05L901603
Location
RANCHO BERNARDO, CA
Unit Number
H19226
Specs
Unit Specifications
LANE 3 ORDER
CAB PACKAGE, ULTRA
GUARDING / SEALING PKG, (HD1)
RIDE CONTROL
FUEL, MANUAL PRIMING
REAR LIGHTS
DOOR, CAB, POLYCARBONATE
SEAT BELT, 2"
INTEGRATED RADIO
PRODUCT LINK, CELLULAR PLE643
TIRES, 12/16.5 CAT 10PR
CERTIFICATION ARR, P65
INSTRUCTIONS, ANSI, USA
SERIALIZED TECHNICAL MEDIA KIT
CORROSION INHIBITOR
COUNTERWEIGHT,MACHINE,EXTERNAL
COUNTERWEIGHT, FRONT, INTERNAL
PACKING, ROLL ON - ROLL OFF
260 CPM
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- ELECTRICAL
- Work Tool Electrical Harness
- Heavy duty battery
- 12-volt Electrical System
- 85 Ampere Alternator
- LED Work Lights
- Auto Reverse Lights
- Switch Backlighting
- Interior LED Dome Light
- Backup Alarm
- Electrical Outlet, Beacon
- Exterior Courtesy Lighting
- Automatic Work light notification flash when parking brake is released
- OPERATOR ENVIRONMENT
- Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (×32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
- Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Headliner
- Interior Rearview Mirror
- Horn
- Hand (Dial) Throttle, Electronic
- Seat Mounted Joystick Controls
- Cell Phone Storage Pocket
- Cup Holder
- 12-volt power port
- Foot Throttle
- HYDRAULICS
- Selectable control pattern – ISO or H
- Electro/hydraulic implement control
- Electro/hydraulic hydrostatic transmission control Speed sensor guarding
- Heavy duty flat faced quick disconnects with integrated pressure release lever
- Hydraulic oil level sight gauge
- POWER TRAIN
- Cat C2.8T turbocharged diesel engine, Meeting U.S. EPA Tier 4 Final and EU Stage V emission standards
- Glow plugs starting aid
- Liquid cooled, direct injection
- Extended life antifreeze (–37°C, –34°F)
- Air cleaner, dual element, radial seal
- Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil Ecology drain – coolant
- Radiator coolant level sight gauge Radiator expansion bottle
- Filter, hydraulic supply, cartridge type
- Filter, hydraulic return, cartridge type
- Filter, canister type, engine oil
- Spring applied, hydraulically released, parking brakes
- Hydrostatic transmission
- Lockable fuel cap
- Hydraulic demand cooling fan
- Auto engine idle
- OTHER
- Auxiliary Hydraulics, Continuous Flow
- Telematics, Product Link, Cellular
- Steel engine door with replaceable louvers
- Engine door – lockable
- Work tool attachment coupler
- Cat ToughGuard™ hose
- MANDATORY EQUIPMENT
- Auxiliary Hydraulics: Standard or High Flow XPS
- Quick Coupler: Mechanical or Hydraulic
- High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
- PERFORMANCE PACKAGES
- Performance Package HP1: Standard Flow Hydraulics
- Performance Package HP3: High Flow XPS Hydraulics
- COMFORT PACKAGES
- Open canopy: Cup Holder, Cell Phone Pocket, choice of vinyl seat (Mechanical Suspension, High Back/Heated/Air Ride Seat
- Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
- TECHNOLOGY PACKAGES
- T2 – T1 + Rear-view camera.
- T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
- T5 – T4 + 2 additional side view cameras.
- RADIO
- Radio, none – for open canopy machines and countries not certified for Bluetooth® technology
- Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm Auxiliary (AUX) input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
- Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm AUX input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
- PRODUCT LINK™
- Product Link Basic series PL243
- Product Link Elite series PLE643
- COOLING FAN
- On-demand, variable speed hydraulic cooling fan
- On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
- GUARDING AND SEALING PACKAGES
- HD0 – base guarding and sealing (engine air inlet rain cap, front cab-toframe sealing, and hydraulic fill access door)
- HD1– intermediate guarding and sealing (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding. Some equipment varies by region)
- HD2 – most comprehensive guarding and sealing (HD1 + turbo guard, exhaust stack wrap, Diesel Particulate Filter (DPF) wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner. Some equipment varies by region
Optional Equipment
- OPTIONAL EQUIPMENT
- External Counterweights
- Beacon, LED
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- 4-point machine lifting eyes
- Paint, Custom
- Speed Sensitive Ride Control
- Bluetooth Key Security
- Attachment Hose Guide
- Corrosion Inhibitor Coating
Specs
Overview
Long Name:
260 Skid Steer Loader
Name:
260
Brand:
Cat
Status:
Current
Engine
Gross Power - SAE J1995:2014
74 hp / 55 kW
Operating Specifications
Rated Operating Capacity
3160 lb / 1434 kg
Weights
Operating Weight
8523 lb / 3866 kg
Dimensions
Wheel Base
49.2 in / 1249 mm
Height - Top of Cab
81.9 in / 2100 mm
Vehicle Width over Tires
66.5 in / 1690 mm
Ground Clearance
7.9 in / 201 mm
Departure Angle
23°
Maximum Dump Angle
46°
Bucket Pin Height - Maximum Lift
132.5 in / 3365 mm
Bucket Pin Height - Carry Position
8 in / 203 mm
Clearance at Maximum Lift and Dump
96.2 in / 2646 mm
Maximum Overall Height
155.8 in / 4160 mm
Length - With Bucket on Ground
135 in / 3575 mm
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Turning Radius from Center - Bucket
82.7 in / 2102 mm
Bucket Pin Reach - Maximum Lift
12.6 in / 320 mm
Maximum Reach - With Arms Parallel to Ground
44.1 in / 1120 mm
Length - Without Bucket
116.4 in / 2956 mm
Reach - Maximum Lift/Dump
21.7 in / 552 mm
Turning Radius from Center - Coupler
53.8 in / 1367 mm
Turning Radius from Center - Machine Rear
71.8 in / 1823 mm
Roll Back Angle
28°
Rack Back Angle - Maximum Height
97°
Hydraulic System
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi / 24130 kPa
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 hp / 45.4 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
34 gal/min / 129 l/min
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min / 86 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
30 gal/min / 113 l/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3500 psi / 24130 kPa
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061 psi / 28000 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
80.7 hp / 60.2 kW
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 hp / 34.6 kW
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 (Optional)
Power Train
Travel Speed - Forward or Reverse - One Speed
7.7 mile/h / 12.4 km/h
Travel Speed - Forward or Reverse - Two Speed Option
11.1 mile/h / 17.9 km/h
Service Refill Capacities
Chain Box - Each Side
2.4 gal (US) / 9 l
Cooling System
3 gal (US) / 11.5 l
Engine Crankcase
2.1 gal (US) / 8 l
Fuel Tank
31 gal (US) / 117.5 l
Hydraulic System
9.7 gal (US) / 36.8 l
Hydraulic Tank
6.9 gal (US) / 26 l
Engine
Net Power - SAE 1349
74 hp / 55 kW
Displacement
171 in³ / 2.8 l
Stroke
4.3 in / 110 mm
Bore
3.5 in / 90 mm
Note
Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Peak Torque - 1,600 rpm - SAE J1995
221 lb/ft / 300 N·m
Net Power - ISO 9249
73 hp / 55 kW
Engine Model
Cat C2.8T (turbo)
Operating Specifications
Tipping Load
6321 lb / 2867 kg
Breakout Force - Tilt Cylinder
9372 lb / 4251 kg
Breakout Force - Lift Cylinder
5948 lb / 3121 kg
Rated Operating Capacity with Optional Counterweight
3388 lb / 1540 kg
Noise Level
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*
83 dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Operating Specifications
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Air Conditioning System (if equipped)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.
Sustainability
Recyclability
93%
Noise Level
Outside Cab**
101 dB(A)
Weights
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS (Open Roll Over Protection System), 1730 mm (68 in) low profile bucket, Cat 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).