D3 Small Dozer

NEW | 2024 CAT D3-0XKW05056

LISTING DETAILS

Model
D3
Product Family
DOZERS
Manufacturer
CAT
Year
2024
Serial Number
0XKW05056
Location
SAN DIEGO, RANCHO BERNARDO
Unit Number
H18826
Specs
  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • POWER TRAIN
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • ELECTRICAL
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • UNDERCARRIAGE
    • SALT undercarriage (40 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • HYDRAULIC
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • CAT TECHNOLOGY
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
    • Cat Product Link™ PLE643/PLE743 Cellular
  • OPERATOR ENVIRONMENT
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic

Optional Equipment

  • POWER TRAIN
    • Air cleaner with external precleaner
    • Installation, winch
  • ELECTRICAL
    • Four integrated front LED lights, two rear LED
  • UNDERCARRIAGE
    • Abrasion undercarriage (36 section)
    • Track Pairs
      – Track, 510 mm (20 in)
      – Track, 660 mm (26 in)
      – Track, 762 mm (30 in)
  • HYDRAULIC
    • Four valve for use with ripper
    • Four valve for use with winch
  • CAT TECHNOLOGY
    • Cat Grade with Slope Assist
    • Cat Grade with 3D
    • Blade Load Monitor (included with Cat Grade 3D)
    • AutoCarry (included with Cat Grade 3D)
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Cat Command Console
    • Cat Command Station
  • OPERATOR ENVIRONMENT
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • OTHER
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Specs

Overview

Long Name:
D3 Track-Type Tractor
Name:
D3
Brand:
Caterpillar
Status:
Current

Engine

Engine Model
Cat® C3.6
Power - Net
104 HP / 77.6 kW
Displacement
220 in³ / 3.6 l
Net Power - 2,200 rpm - SAE J1349
104 HP / 77.6 kW
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
104 HP / 77.6 kW
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Engine

Power Train
Hydrostatic

Engine

Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Weights

Operating Weight
20639.68 lb / 9362 kg

Weights

Operating Weight
20640 lb / 9362 kg

Weights

Operating Weight - LGP
21369 lb / 9693 kg
Operating Weight - LGP, 762 mm/30 in
21810 lb / 9893 kg
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II

Transmission

Drive Pumps
1
Maximum Travel Speed - Forward
5.6 mile/h / 9 km/h
Maximum Travel Speed - Reverse
6.2 mile/h / 10 km/h
Track Motors
2
Relief Valve Settings
7033 psi / 48500 kPa

Undercarriage

Shoe Width - Standard
20 in / 510 mm
Ground Pressure - LGP
4.5 psi / 31.2 kPa
Track Gauge - LGP
69 in / 1750 mm
Length - Track on Ground - LGP
91 in / 2310 mm
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
Ground Pressure - LGP, 762 mm (30 in)
3.9 psi / 27.2 kPa
Length - Track on Ground - LGP, 762 mm (30 in)
91 in / 2310 mm
Shoe Width - LGP
26 in / 660 mm
Shoe Width - LGP, 762 mm (30 in)
30 in / 762 mm
Track Gauge
63 in / 1600 mm
Number of Rollers - Each Side
7
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm

Undercarriage

Ground Pressure
5.7 psi / 38.9 kPa
Length of Track on Ground
91 in / 2310 mm
Number of Shoes - Each Side - Abrasion Undercarriage
36

Service Refill Capacities

Cooling System
5 gal (US) / 19 l
Final Drive - Each - LGP
2.6 gal (US) / 10 l
Crankcase - With Filter
2.8 gal (US) / 10.5 l
Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US) / 19 l
Transmission - Hydraulic Tank
23.8 gal (US) / 90 l
Fuel Tank
51.5 gal (US) / 195 l

Service Refill Capacities

Final Drives - Each Side
2.6 gal (US) / 10 l

Hydraulic Controls

Pump Output
17.2 gal/min / 65 l/min
Relief Valve Settings
2988 psi / 20600 kPa

Ripper

Type
Parallelogram
Number of Shanks
3
Height
6.5 in / 165 mm
Weight
1222 lb / 554 kg
Maximum Digging Depth
13.3 in / 337.5 mm
Maximum Reach - Ground Line
30.2 in / 766 mm
Overall Width
67.3 in / 1710 mm
Maximum Ground Clearance Under Tip
17.6 in / 448 mm

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

BLADE: Blade Width - LGP
126.7 in / 3220 mm
Track Gauge - LGP, 762 mm (30 in)
73 in / 1860 mm
BLADE: Digging Depth - LGP
23.2 in / 590 mm
Track Gauge - LGP
67.9 in / 1750 mm
BLADE: Blade Capacity (SAE) - LGP
3.06 yd³ / 2.34 m³
BLADE: Blade Width at Maximum Angle - LGP
115.8 in / 2940 mm
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
Ground Clearance - LGP, 762 mm (30 in)
13 in / 332 mm
BLADE: Blade Height - LGP
39.8 in / 1010 mm
BLADE: Blade Lift Height - LGP
30.2 in / 767 mm
Ground Clearance - LGP
13 in / 332 mm
Overall Length - With Blade - LGP, 762 mm (30 in)
169.6 in / 4309 mm
Overall Length - With Blade - LGP
169.6 in / 4309 mm
BLADE: Maximum Tilt - LGP
17.7 in / 448 mm
BLADE: Maximum Angle (either side) - LGP
25°

Dimensions

BLADE: Blade Capacity (SAE) - Standard
2.86 yd³ / 2.19 m³
Track Gauge - Standard
63 in / 1600 mm
BLADE: Digging Depth - Standard
23.8 in / 605 mm
BLADE: Blade Lift Height - Standard
30.2 in / 767 mm
Ground Clearance - Standard
13 in / 332 mm
Overall Length - With Blade - Standard
170.7 in / 4337 mm
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°
BLADE: Blade Height - Standard
42.2 in / 1073 mm
BLADE: Maximum Tilt - Standard
15.8 in / 402 mm
Note
Abrasion Undercarriage
BLADE: Blade Width - Standard
109.5 in / 2782 mm
BLADE: Blade Width at Maximum Angle - Standard
103.8 in / 2636 mm
BLADE: Maximum Angle (either side) - Standard
25°

Dimensions

Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - Standard
128.7 in / 3270 mm
Dozer Height - Standard
109 in / 2769 mm
Width of Dozer (standard shoes, no blade) - LGP
92.9 in / 2360 mm
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
103.5 in / 2630 mm
Length of Basic Dozer (without blade) - LGP
128.7 in / 3270 mm
Dozer Height - LGP, 762 mm (30 in)
109 in / 2769 mm
Width of Dozer (standard shoes, no blade) - Standard
83 in / 2110 mm
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
128.7 in / 3270 mm
Dozer Height - LGP
109 in / 2769 mm

Retrieval Winch

Maximum Line Pull - Bare Drum
32150 lb / 14583 kg
Control
Hydraulic
Rope Diameter - Optional
0.75 in / 19 mm
Drum Capacity - Optional Cable
195 ft / 59 m
Maximum Line Speed - Full Drum
79 ft/min / 24 m/min
Drum Capacity - Recommended Cable
277 ft / 84 m
Winch Drive
Hydraulic
Weight
1747 lb / 794 kg
Maximum Line Pull - Full Drum
20350 lb / 9231 kg
Rope Diameter - Recommended
0.63 in / 16 mm
Maximum Line Speed - Bare Drum
50 ft/min / 15 m/min
Speed
Variable
Winch Length
35.63 in / 905 mm
Drum Diameter
8 in / 203.2 mm
Overall width
27.91 in / 709 mm
Drum Width
9.65 in / 245 mm
Throat Clearance
5.6 in / 141.4 mm

High Performance Winch

Winch length
27.76 in / 705 mm
Rope diameter – optional
0.75 in / 19 mm
Maximum line speed – bare drum
131 ft/min / 40 m/min
Maximum line pull – bare drum
40000 lb / 18144 kg
Weight
1345 lb / 610 kg
Drum capacity – optional
256 ft / 78 m
Maximum line speed – full drum
207 ft/min / 63 m/min
Rope diameter – recommended
0.63 in / 16 mm
Winch drive
Hydrostatic
Throat clearance
6.75 in / 171.5 mm
Drum diameter
10 in / 254 mm
Overall width
29.2 in / 741 mm
Drum width
10.8 in / 274 mm
Maximum line pull – full drum
25000 lb / 11340 kg
Speed
Variable
Drum capacity – recommended cable
371 ft / 113 m
Control
Hydraulic