New | TH514C Telehandler

Operating Specifications
Rated Load Capacity11021.0 lb
Maximum Lift Height45.0 ft
Load at Max Height - Stabilizers Down7000.0 lb
Load at Max Height - Stabilizers Up4000.0 lb
Maximum Forward Reach30.25 ft
Load at Max Reach - Stabilizers Down3000.0 lb
Load at Max Reach - Stabilizers Up1000.0 lb
Top Travel Speed20.0 mph
Drawbar Pull 74.5 kW22037.0 lb
Maximum Lift Height - Stabilizers Down45.0 ft
Maximum Lift Height - Stabilizers Up43.5 ft
Outside Turning Radius Over Tires12.86 ft
Engine
Engine ModelCat® C3.4B (meets U.S. EPA Tier 4 Interim Emission Standards)
Bore3.9 in
Stroke4.3 in
Displacement207.5 in3
Gross Power (ISO 14396)101.0 hp
Maximum Torque420 N·m/1,400 rpm
Weights
Operating Weight with Carriage and Forks24890.0 lb
Tires
Standard14.00-24 16PR TG-02
Hydraulic System
Maximum System Pressure3626.0 psi
Maximum Pump Flow39.63 gal/min
Pump TypeVariable displacement load sensing axial piston pump
Auxiliary Hydraulic Supply - Intermittent21.13 gal/min
Auxiliary Hydraulic Supply - Continuous15.85 gal/min
Service Refill Capacities
Fuel Tank39.63 gal
Hydraulic Tank23.78 gal
Transmission Speeds
Forward - 13.6 mph
Forward - 26.7 mph
Forward - 315.2 mph
Forward - 420.0 mph
Reverse - 13.4 mph
Reverse - 26.7 mph
Reverse - 314.9 mph
Boom Performance
Boom Up13.7 Seconds
Boom Down14.6 Seconds
Tele In19.1 Seconds
Tele Out16.6 Seconds
Crowd Forward (dump)4.8 Seconds
Crowd Backward4.7 Seconds
Combined - Up and Out28.0 Seconds
Combined - Down and In19.0 Seconds
Bucket Breakout Force to ISO 831321356.0 lb
Boom Breakout Force14162.0 lb
Brakes
Parking BrakesMechanical on front axle
Service BrakesServo assisted on front axle
Sound
Exterior Sound (74.5 kW Engine)106.0 dB(A)

IMPORTANT

Rated lift capacities shown are with machine equipped with carriage and pallet forks. The machine must be level on a firm surface with undamaged, properly inflated tires as specified by the manufacturer. Machine specifications and stability are based on rated lift capacities at specific boom angles and boom lengths. (If specifications are critical, the proposed application should be discussed with your dealer.) DO NOT exceed rated lift capacity loads, as unstable and dangerous machine conditions will result. DO NOT tip the machine forward to determine the allowable load. Use only JLG approved attachments with proper material handler model/attachment load capacity charts displayed in the operator’s cab. OSHA requires all rough terrain forklift operators be trained according to OSHA 29 CFR 1910.178 (l). Due to continuous product improvements, machine specifications and/or equipment changes may be made without prior notification. This machine meets or exceeds ANSI/ITSDF B56.6-2005 as originally manufactured for intended applications.

listofrelationships

original

original

original

original

Other Models in this Category

Select Product Category

Hot Deals - Buy New. Buy Now. We'll Make Your Down Payment. Learn More.

Why Cat is Better. Machine Comparison

"
80 percent of our heavy equipment fleet is Caterpillar. We are extremely satisfied with Hawthorne Cat’s service and staff. Hawthorne Cat is the obvious choice for our equipment needs - now and in the future.”
Sam Wathen
SC Valley Engineering, Inc
"

San Diego
Ross Farmer
Sales Manager
858.674.7048 office
760.815.4094 mobile
rfarmer@hawthornecat.com

Hawaii
Shane Oliveira
Sales Manager
808.676.0269 office
808.4894681 mobile
soliveira@hawthornecat.com