990
990 Wheel Loader
DESCRIPTION
The Cat® 990 Wheel Loader helps you move more material in less time, at a low cost per ton, for a fast return on your investment. This machine offers significant fuel savings, low maintenance costs, and great productivity and durability to acheive multiple life cycles.Introduction Video - 990 Large Wheel Loader (YouTube)
Walkaround Video - 990 Large Wheel Loader (YouTube)
- Cat C27 engine is built and tested to meet your most demanding applications.
- Long engine life and improved fuel efficiency with reduced rated speed.
- Designed for long life, rebuildability, and high resale value.
- Maximum responsiveness with Steering and Integrated Control (STIC™).
- Moves more material more efficiently with improved power and control.
- Durable construction withstands the toughest loading conditions and multiple life cycles.
- Two engine emission options are available that meet U.S. EPA Tier 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent.
- More payload per pass on truck-loading applications with Performance Series Buckets.
- Payload increase to optimize pass on 775 trucks.
- Positive Flow Control (PFC) hydraulic system helps increase efficiency, bucket feel, and responsiveness with consistent performance.
- Excellent visibility to the bucket edges and work area through a Z-bar linkage.
- Planetary power shift transmission for maximum uptime.
- Convenient, responsive, electro-hydraulic controls increase operator productivity.
- Superior digging, high bucket fill factors, reduced dig times.
- Integrated steering and transmission controls.
- Operators can check tire pressure during operation with any change sending a fault code to VisionLink®, helping to prevent premature tire failure.
- Increased efficiency material per gallon of fuel.
- Economy mode for reduced rated engine speed and reduced fuel consumption.
- Positive flow-control hydraulics for full flow on demand at low engine speeds.
- Engine Idle Shutdown for less fuel used while idling.
- Fully integrated electronic engine controls help make your fuel go farther.
- Developed to monitor, manage, and enhance your jobsite operations.
- Payload provides accurate weighing* of the materials you are loading and hauling. Payload data is displayed in real-time to improve productivity and reduce overloading.
- Detect helps enhance awareness of the environment around working equipment and provides alerts to help keep people and assets safe on the jobsite.
- VisionLink wirelessly connects you to your equipment, giving you access to essential information you need to know to run your business.
- Gain valuable insight into how your machine or fleet is performing.
- Optional Advanced Productivity subscription helps provide comprehensive actionable information to help you manage and improve the productivity and profitability of your operations.
- 10% lower maintenance costs.
- Grouped service points.
- Electro-hydraulic controls.
- Swing-out engine compartment service doors.
- Ecology drains to prevent spills.
- Ground level access to transmission control valves.
- Vehicle Information Management System (VIMS™) notifications to resolve problems before failure.
- Long life, rebuildability, and high resale value.
- Standard stairway lighting.
- Left- and right-hand stairs with 45-degree angle.
- Standard Cat Vision, rear vision camera system.
- Pressurized cabin with filtered and reduced sound levels.
- World-class operator comfort and ergonomics.
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion.
- Easy-to-reach levers and controls with seat-mounted implement pod to reduce fatigue.
- Ergonomic switch placement and displays with large backlit switches, LED indicators, and ISO symbols.
- Optional heated mirrors.
- Two-position rocker switch activates the electro-hydraulic parking brake.
- Reduced vibrations from isolated cab mounts and seat air suspension.
- Automatic cab temperature controls.
- Achieve precise positioning for easy loading in tight areas with 35 degrees of steering articulation.
- Precise machine control by load-sensing hydraulic steering system.
- Designed to meet the demands of millyard applications.
- Designed for durability, ensuring availability in multiple life cycles.
- Equipped with Economy Mode to save on fuel consumption by the use of On Demand Throttle.
- Equipped with Impleller Clutch Torque Convereter (ICTC) and Rimpull Control System (RCS) to reduce tire slippage and fuel efficiency.
- Full hydraulic flow down to 1,400 engine rpm by using hydraulic flow sharing technology.
- Equipped with 45 degree angle access ladders and standard Cat Vision for enhanced safety.
- Cat forks are designed for maximum productivity and durability.
- Integrates front camera mounting location for maximum visibility to the entire fork tips during truck unloading.
- World-class safety, operator comfort and efficiency in pit digging and skull handling applications.
- Efficiency of manual throttle and ergonomics of throttle lock.
- Excellent visibility to the bucket edges and work area through a Z-bar design.
- Equipped with extra heat protection to key hoses and harnesses for improved reliability.
- World-class transmission for long life and consistent, smooth shifting; specifically designed for mining applications.
- Advanced filtration system for extended performance and reliability of the hydraulic system.
- Advanced Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) reduce tire slippage and wear, improve fuel efficiency, and reduce cost-per-ton.
- Linkage pin joints have optional auto-lube system to ensure long life.
- Frame resists torsional shock and twisting forces.
- Heavy-duty steering cylinder mounts and axle mounting ensure increased structural integrity.
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- OPERATOR ENVIRONMENT
- Air conditioner and heater with automatic temperature control
- Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
- Cat Vision, rear vision camera system
- 12-volt power port
- Coat hook
- Cab precleaner, powered
- Electro-hydraulic tilt and lift controls (seat mounted)
- Flip-up armrest
- Heater and defroster
- CB radio ready
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature - Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear - Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock - Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and Transmission Integrated Control (STIC™) system with steering lock
- Tinted glass
- Trainer seat with lap belt
- Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
- POWERTRAIN
- Brakes, full hydraulic, enclosed, oil-disc
- Axle-shaft oil-disc service brake
- Electro hydraulic parking brake
- Case drain screens
- Cat clean emission module (CEM) - (Tier 4 only)
- Demand fan
- Engine Cat C27
- Fuel priming pump (electric)
- Ground level shutdown switch
- Mufflers (under hood) (Tier 2 equivalent only)
- Precleaner, engine air intake
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Starting aid, (ether) manual override
- Throttle Lock
- Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
- Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
- ELECTRICAL
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance free (2 – 1,400 CCA)
- Converter, 10/15 amp, 24V to 12V
- Deutsch component connectors
- Electrical system, 24V
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
- Starter, electric
- Auxiliary start receptacle
- OTHER
- Automatic bucket lift kickout/positioner
- Axle temperature sensor
- Battery disconnect and jump start receptacle, bumper
- Coupling, Caterpillar O-ring face seals
- Economy mode with on demand throttle
- Emergency platform exit
- Engine, crankcase, 500 hour interval with CH4
- Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown - Fenders, steel (front)
- Guards, crankcase and powertrain
- Ground level lockable battery disconnect switch
- Grouped/labeled lube points
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Oil sampling valves
- Positive flow control hydraulic system
- Product Link™
- Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
- Venturi stack
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
Optional Equipment
- NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
- POWERTRAIN
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
- OPERATOR ENVIRONMENT
- Cat Detect, object detection system
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth®
- LED warning strobe
- Mirrors heated
- Window pull-down visor
- OTHER
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- OTHER OPTIONAL CONFIGURATIONS
- Millyard
- Steel Mill
Specs
Overview
Long Name:
990 Wheel Loader
Name:
990
Brand:
Caterpillar
Status:
Current
Engine
Engine Power - ISO 14396:2002
786 hp / 586 kW
Engine Model
Cat® C27
Emissions
Option 1 - U.S. EPA Tier 4 Final/EU Stage V
Rated Speed
1800 r/min / 1800 r/min
Gross Power - SAE J1995:2014
801 hp / 597 kW
Net Power - SAE J1349:2011 - Standard Ambient
732 hp / 546 kW
Net Power - SAE J1349:2011 - High Ambient
681 hp / 508 kW
Emissions
Option 2 - Emits equivalent to U.S. EPA Tier 2
Rated Speed
1800 r/min
Engine Power - ISO 14396:2002
752 hp / 561 kW
Gross Power - SAE J1995:2014
766 hp / 571 kW
Net Power - SAE J1349:2011 - Standard Ambient
699 hp / 521 kW
Net Power - SAE J1349:2011 - High Ambient
648 hp / 483 kW
Bore
5.4 in / 137.2 mm
Stroke
6 in / 152.4 mm
Displacement
1649.5 in³ / 27.03 l
Peak Torque - 1,200 rpm
2624 lb/ft / 3557 N·m
Torque Rise
18 % / 18 %
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Transmission
Transmission Type
Cat planetary power shift
Forward - 1
4.6 mile/h / 7.4 km/h
Forward - 2
8.2 mile/h / 13.2 km/h
Forward - 3
14.5 mile/h / 23.3 km/h
Reverse - 1
5.1 mile/h / 8.15 km/h
Reverse - 2
9.1 mile/h / 14.6 km/h
Reverse - 3
16 mile/h / 25.7 km/h
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 2
8.2 mile/h / 13.2 km/h
Direct Drive - Forward 3
14.5 mile/h / 23.3 km/h
Direct Drive - Reverse 1
5.1 mile/h / 8.15 km/h
Direct Drive - Reverse 2
9.1 mile/h / 14.6 km/h
Direct Drive - Reverse 3
16 mile/h / 25.7 km/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Operating Specifications
Operating Weight - Standard
178517 lb / 80974 kg
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Rated Payload - Standard
17.5 ton (US) / 15.9 t
Rated Payload - High Lift
17.5 ton (US) / 15.9 t
Cat Truck Match - Standard
773-775
Cat Truck Match - High Lift
775-777
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive flow control
Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm
240 gal/min / 910 l/min
Relief Valve Setting - Lift/Tilt
4786 psi / 33000 kPa
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing
Pilot Relief Setting
507 psi / 3500 kPa
Hydraulic Cycle Times
Rack Back
4.3 s / 4.3 s
Raise
8.6 s / 8.6 s
Dump
2.9 s / 2.9 s
Lower
3.7 s / 3.7 s
Lower Float Down
3.7 s / 3.7 s
Total Hydraulic Cycle Time - Empty Bucket
13.8 s / 13.8 s
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Steering System - Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
96.2 gal/min / 364 l/min
Relief Valve Setting - Steering
5004 psi / 34500 kPa
Total Steering Angle
70°
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 2.7 kg (5.9 lb) of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).
Axles
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Brakes
Brakes
ISO 3450: 2011
Service Refill Capacities
Fuel Tank
281 gal (US) / 1064 l
Cooling System
54.9 gal (US) / 208 l
Engine Crankcase
20 gal (US) / 75.7 l
Transmission
29.1 gal (US) / 110 l
Differential - Final Drives - Front
71.6 gal (US) / 271 l
Differential - Final Drives - Rear
68.9 gal (US) / 261 l
Hydraulic System Factory Fill
210 gal (US) / 795 l
Hydraulic Tank - Implement and Hydraulic Fan
68.9 gal (US) / 261 l
Hydraulic Tank - Steering and Braking
34.9 gal (US) / 132 l
Note
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
116 dB(A) / 116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A) / 114 dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)
116 dB(A) / 116 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A) / 72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114 dB(A) / 114 dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
17.2 ft / 5240 mm
Ground to Top of Exhaust Stacks
16.6 ft / 5049 mm
Ground to Top of Hood
12.7 ft / 3862 mm
Ground to Bumper Clearance
3.5 ft / 1079 mm
Rear Axle - Centerline to Bumper
12.5 ft / 3795 mm
Front Axle Centerline to Bucket Tip
15.4 ft / 4689 mm
Wheel Base
15.1 ft / 4600 mm
Maximum Overall Length
42.9 ft / 13084 mm
Ground to Lower Hitch Clearance
2 ft / 596 mm
Ground to Center of Front Axle
4.2 ft / 1290 mm
Clearance at Maximum Lift
7.2 ft / 4044 mm
Rack Back Angle at Ground Level
40.4°
Rack Back Angle at Carry
48.8°
B-Pin Height - Maximum Lift
19.7 ft / 6009 mm
Maximum Overall Height - Bucket Raised
27.2 ft / 8281 mm
Rack Angle at Maximum Lift
63.7°
Dump Angle at Maximum Lift
45°
Reach - Maximum Lift
7.2 ft / 2194 mm
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
17.2 ft / 5240 mm
Ground to Top of Exhaust Stacks
16.6 ft / 5049 mm
Ground to Top of Hood
12.7 ft / 3862 mm
Ground to Bumper Clearance
3.5 ft / 1079 mm
Rear Axle - Centerline to Bumper
12.5 ft / 3795 mm
Front Axle Centerline to Bucket Tip
17.8 ft / 5425 mm
Wheel Base
15.1 ft / 4600 mm
Maximum Overall Length
45.3 ft / 13820 mm
Ground to Lower Hitch Clearance
2 ft / 596 mm
Ground to Center of Front Axle
4.2 ft / 1290 mm
Clearance at Maximum Lift
14.8 ft / 4521 mm
Rack Back Angle at Ground Level
39.9°
Rack Back Angle at Carry
49.3°
B-Pin Height - Maximum Lift
21.2 ft / 6470 mm
Maximum Overall Height - Bucket Raised
28.7 ft / 8742 mm
Rack Angle at Maximum Lift
60.6°
Dump Angle at Maximum Lift
51°
Reach - Maximum Lift
8.5 ft / 2583 mm
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
SEE HOW 990 COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Large Wheel Loaders
990
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C27
- Rated Speed
- 1800 r/min
- Bore
- 5.4 in / 137.2 mm
- Stroke
- 6 in / 152.4 mm
- Displacement
- 1649.5 in³ / 27.03 l
- Note
- Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
- Transmission Type
- Cat planetary power shift
- Bucket Capacity Range
- 8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
- Lift/Tilt System - Circuit
- Positive flow control
- Relief Valve Setting - Lift/Tilt
- 4786 psi / 33000 kPa
- Rack Back
- 4.3 s / 4.3 s
- Raise
- 8.6 s / 8.6 s
- Dump
- 2.9 s / 2.9 s
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Total Steering Angle
- 70°
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 8.5°
- Brakes
- ISO 3450: 2011
- Fuel Tank
- 281 gal (US) / 1064 l
- Transmission
- 29.1 gal (US) / 110 l
- Differential - Final Drives - Front
- 71.6 gal (US) / 271 l
- Differential - Final Drives - Rear
- 68.9 gal (US) / 261 l
- Ground to Top of ROPS
- 17.2 ft / 5240 mm
- Ground to Top of Exhaust Stacks
- 16.6 ft / 5049 mm
- Ground to Top of Hood
- 12.7 ft / 3862 mm
- Ground to Bumper Clearance
- 3.5 ft / 1079 mm
- Rear Axle - Centerline to Bumper
- 12.5 ft / 3795 mm
- Front Axle Centerline to Bucket Tip
- 17.8 ft / 5425 mm
- Wheel Base
- 15.1 ft / 4600 mm
- Maximum Overall Length
- 45.3 ft / 13820 mm
- Ground to Lower Hitch Clearance
- 2 ft / 596 mm
- Ground to Center of Front Axle
- 4.2 ft / 1290 mm
- Clearance at Maximum Lift
- 14.8 ft / 4521 mm
- B-Pin Height - Maximum Lift
- 21.2 ft / 6470 mm
- Maximum Overall Height - Bucket Raised
- 28.7 ft / 8742 mm
- Dump Angle at Maximum Lift
- 51°
- Reach - Maximum Lift
- 8.5 ft / 2583 mm
Selected Model
Large Wheel Loaders
988 XE
- Brand
- Cat
- Status
- Current
- Engine Model
- Cat® C18
- Rated Speed
- 1,700 rpm
- Bore
- 5.7 in / 145 mm
- Stroke
- 7.2 in / 183 mm
- Displacement
- 1105 in³ / 18.1 l
- Note
- Specifications are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height.
- Transmission Type
- Cat switched reluctance electric drive
- Bucket Capacity Range
- 4.7-13 m3 (6.2-17 yd3)
- Lift/Tilt System - Circuit
- EH-Positive Flow Control, Flow Sharing
- Relief Valve Setting - Lift/Tilt
- 4757 psi / 32800 kPa
- Rack Back
- 4.5 s / 4.5 s
- Raise
- 8 s / 8 s
- Dump
- 2.2 s / 2.2 s
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Total Steering Angle
- 86°
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 13°
- Brakes
- ISO 3450:2011
- Fuel Tank
- 147 gal (US) / 555 l
- Transmission
- 16 gal (US) / 60 l
- Differential - Final Drives - Front
- 49 gal (US) / 186 l
- Differential - Final Drives - Rear
- 49 gal (US) / 186 l
- Ground to Top of ROPS
- 13.8 ft / 4221 mm
- Ground to Top of Exhaust Stacks
- 13.8 ft / 4214 mm
- Ground to Top of Hood
- 10.9 ft / 3334 mm
- Ground to Bumper Clearance
- 3.1 ft / 933 mm
- Rear Axle - Centerline to Bumper
- 10.5 ft / 3187 mm
- Front Axle Centerline to Bucket Tip
- 15.3 ft / 4661 mm
- Wheel Base
- 14.9 ft / 4550 mm
- Maximum Overall Length
- 41.9 ft / 12761 mm
- Ground to Lower Hitch Clearance
- 1.9 ft / 568 mm
- Ground to Center of Front Axle
- 3.2 ft / 978 mm
- Clearance at Maximum Lift
- 13.3 ft / 4043 mm
- B-Pin Height - Maximum Lift
- 19.3 ft / 5887 mm
- Maximum Overall Height - Bucket Raised
- 25.8 ft / 7849 mm
- Dump Angle at Maximum Lift
- -39.4 ° / -39.4 °
- Reach - Maximum Lift
- 6.8 ft / 2062 mm
Large Wheel Loaders
992
- Brand
- Caterpillar
- Status
- Current
- Engine Model
- Cat® C32B
- Rated Speed
- 1750 rpm
- Bore
- 5.7 in / 145 mm
- Stroke
- 6.4 in / 162 mm
- Displacement
- 1963.5 in³ / 32.1 l
- Note
- Machine Sound Level (ISO 6396:2008) - 113 dB(A)
- Transmission Type
- Cat Planetary Powershift
- Bucket Capacity Range
- 11.5-24.5 m³ (15-32 yd³)
- Lift/Tilt System - Circuit
- Positive Flow Control
- Relief Valve Setting - Lift/Tilt
- 5000 psi / 34500 kPa
- Rack Back
- 2.3 s / 2.3 s
- Raise
- 9 s / 9 s
- Dump
- 2.6 s / 2.6 s
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston, Variable Displacement
- Total Steering Angle
- 80°
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±9°
- Brakes
- ISO 3450:2011
- Fuel Tank
- 385.7 gal (US) / 1460 l
- Transmission
- 51.5 gal (US) / 195 l
- Differential - Final Drives - Front
- 96.4 gal (US) / 365 l
- Differential - Final Drives - Rear
- 96.4 gal (US) / 365 l
- Ground to Top of ROPS
- 18.3 ft / 5571 mm
- Ground to Top of Exhaust Stacks
- 17 ft / 5169 mm
- Ground to Top of Hood
- 13.1 ft / 3983 mm
- Ground to Bumper Clearance
- 3.8 ft / 1145 mm
- Rear Axle - Centerline to Bumper
- 13.5 ft / 4119 mm
- Front Axle Centerline to Bucket Tip
- 18.8 ft / 5724 mm
- Wheel Base
- 19.3 ft / 5890 mm
- Maximum Overall Length
- 51.6 ft / 15733 mm
- Ground to Lower Hitch Clearance
- 2.2 ft / 666 mm
- Ground to Center of Front Axle
- 4.3 ft / 1308 mm
- Clearance at Maximum Lift
- 17.2 ft / 5256 mm
- B-Pin Height - Maximum Lift
- 24.5 ft / 7465 mm
- Maximum Overall Height - Bucket Raised
- 32 ft / 9759 mm
- Dump Angle at Maximum Lift
- -48.1 degrees
- Reach - Maximum Lift
- 7.6 ft / 2319 mm