C18 (SRMP) Marine Generator Set
C18 (SRMP) Marine Generator Set
DESCRIPTION
The C18 SRMP is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.Separate circuit aftercooling system
The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler
Emissions
EPA Tier 3 compliant, IMO II and EU IWW compliant
Cooling system
Heat exchanger and Keel cooled options for all ratings
Turbo Configurations
Single turbo configurations for all ratings
Competitive size and weight
Marine Certifications
All major MCS type approvals available from factory
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- Air inlet system
- Separate circuit after-cooled (SCAC)
- Heavy-duty inlet air filter
- Cooling system
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
- Exhaust system
- Water-cooled exhaust manifold & turbocharger
- Round flanged exhaust outlet
- Fuel system
- Hybrid fuel lines
- MEUI™ fuel system
- Fuel filter, front service
- Fuel transfer and priming pumps
- Lube system
- Center sump oil pan, deep
- Front and top service oil filler locations
- Front service dipstick
- Mounting system
- Vibration Isolators
- Formed C-channel rails
- Control system
- Electronic fuel/air ratio control
- SRMP permanent magnet 12-lead generator
- Digital voltage regulator
- Class H insulation, Class F temperature rise, IP23 protection
Optional Equipment
- Exhaust system
- Dry Elbows
- Water-Cooled Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler, Spark Arresting
- Fumes disposal (closed system)
- Air inlet system
- Air Inlet Adapter
- Charging system
- Battery Chargers 10 amp
- Battery sets: 24V 950-1300 CCA
- Charging alternator 24V 105 amp
- Control system
- Caterpillar alarm and protection
- EMCP 4.2 control panel
- MGCP III B control panel
- Fuel system
- Duplex fuel filter – front service
- Fuel cooler
- Primary fuel/water separator
- Instrumentation
- Generator service side - LH, RH
- Generator terminal box extension
- Load sharing module (option for type approved module)
- Lube system
- Spare pump kits
- Duplex oil filter – front service
- Manual sump pump
- Mounting system
- Vibration Isolators
- Protection system
- Generator protection - IP44
- Starting system
- Starting motors - electric and/or air
- Jacket water heaters
Specs
Overview
Long Name:
C18 (SRMP) Marine Generator Set
Name:
C18 (SRMP) Marine Generator Set
Brand:
Caterpillar
Status:
Current
Generator Set Specifications
Minimum Rating
260 ekW (325 kVA)
Maximum Rating
565 ekW (706 kVA)
Frequency
50 hz
Speed
50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Engine Specifications
Configuration
In-line 6, 4-Stroke-Cycle Diesel
Aspiration
Turbocharged - aftercooled
Bore
5.7 in / 145 mm
Stroke
7.2 in / 183 mm
Fuel System
MEUI
Generator Set Configurations
Emissions
EPA Tier 3, IMO II, EU IW
Generator Set Dimensions - Radiator Cooled
Height
94.8 in / 2408 mm
Length
55.6 in / 4741 mm
Generator Set Dimensions - Keel and Hex Cooled
Length
119.6 in / 3038 mm
Height
64.9 in / 1648 mm
Generator Specifications
Excitation
SRMP
Insulation
Class H
IP Rating
IP23 (standard), IP 44 (optional)
Voltage Regulator
CDVR (Digital Voltage)
Generator Set Dimensions - Radiator Cooled
Width
66.9 in / 1699 mm
Generator Set Dimensions - Keel and Hex Cooled
Width
55.6 in / 1411 mm
Generator Set Dimensions - Radiator Cooled
Weight - Approximate
13396 lb / 6076 kg
Generator Set Dimensions - Keel and Hex Cooled
Weight - Approximate
9747 lb / 4221 kg
SEE HOW C18 (SRMP) Marine Generator Set COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
Marine Generator Sets
C18 (SRMP) Marine Generator Set
- Brand
- Caterpillar
- Status
- Current
- Minimum Rating
- 260 ekW (325 kVA)
- Maximum Rating
- 565 ekW (706 kVA)
- Configuration
- In-line 6, 4-Stroke-Cycle Diesel
- Aspiration
- Turbocharged - aftercooled
- Bore
- 5.7 in / 145 mm
- Stroke
- 7.2 in / 183 mm
- Emissions
- EPA Tier 3, IMO II, EU IW
- Height
- 64.9 in / 1648 mm
- Length
- 119.6 in / 3038 mm
- Width
- 55.6 in / 1411 mm
Selected Model
Marine Generator Sets
C1.5
- Brand
- Caterpillar
- Status
- Current
- Minimum Rating
- 10 ekW (10 kVA)
- Maximum Rating
- 12 ekW (12 kVA)
- Configuration
- Inline 3, 4-Stroke Cycle diesel
- Aspiration
- Naturally Aspirated
- Bore
- 3.31 in / 84 mm
- Stroke
- 3.5 in / 90 mm
- Emissions
- U.S. EPA Tier 3
- Height
- 27.1 in / 535 mm (open) 27.9 in / 711 mm (enclosed)
- Length
- 40.8 in / 1,038 mm (open) 43.1 in / 711 mm (enclosed)
- Width
- 21.1 in / 535 mm (open) 24.0 in / 608 mm (enclosed)
Marine Generator Sets
C2.2
- Brand
- Caterpillar
- Status
- Current
- Minimum Rating
- 15 ekW (15 kVA)
- Maximum Rating
- 25 ekW (25 kVA)
- Configuration
- Inline 4, 4-Stroke Cycle diesel
- Aspiration
- Naturally Aspirated / Turbocharged
- Bore
- 3.31 in / 84 mm
- Stroke
- 3.5 in / 90 mm
- Emissions
- U.S. EPA Tier 3
- Height
- 32.8 in / 835 mm (open) 31.0 in / 775 mm (enclosed)
- Length
- 47.9 in / 1,219 mm (open) 50.7 in / 1,290 mm (enclosed)
- Width
- 22.3 in / 567 mm (open) 24.7 in / 628 mm (enclosed)