C32 ACERT™

C32 ACERT Land Mechanical Drilling Engine

C32 ACERT Land Drilling Engines

DESCRIPTION

Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions.This is an ideal engine for land mechanical drilling applications such as mud pump drives.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C32 ACERT Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions.This is an ideal engine for land mechanical drilling applications such as mud pump drives.Cat C32 ACERT™ Industrial Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.Oil and Gas

Engine Design

- Proven reliability and durability- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range- High power density — lightweight engine for weightsensitive applications- PTO drive options provide flexible access to auxiliarypower for pumps and other needs

Advanced Digital Engine Management

ADEM A4 engine management system integrates speedcontrol, air/fuel ratio control and ignition/detonationcontrols into a complete engine management systemwith integrated digital ignition, engine protection andmonitoring.

Transmissions

Caterpillar has a full line of engine-transmission packagesthat can be fully integrated with your axle, hydraulics, andoperator interface. Cat®transmissions deliver continuousoperation under full load, smooth shifting at any speed,and maximum up time, with unmatched durability andeasy maintenance

Custom Packaging

For any petroleum application, trust Caterpillar to meetyour exact needs with a factory custom package. Catengines, generators, enclosures, controls, radiators,transmissions — anything your project requires — can becustom designed and matched to create a one-of-a kindsolution. Custom packages are globally supported andare covered by a one-year warranty after startup.

Full Range of Attachments

Large variety of factory-installed engine attachmentsreduces packaging time

Testing

Every engine is full-load tested to ensure proper engineperformance.

Product Support Offered Through Global Cat Dealer

More than 2,200 dealer outletsCat factory-trained dealer technicians service everyaspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSMprogram matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com

  • Standard Equipment
  • Optional Equipment
  • Specs
  • Docs

Standard Equipment

  • Air Inlet System
    • Quad turbocharger — 3 cylinder exhaust to each turbo
    • Connections configured for ATAAC (Air-to-Air-Aftercooled)or remote heat exchanger
  • Control System
    • ADEM A4 electronic control module
    • Electronic governing, PTO speed control
    • Customer programmable ratings
    • Cold mode start strategy
    • Automatic altitude compensation
    • Automatic fuel temperature compensation
    • Programmable low and high idle, and top engine speedlimit
    • Electronic diagnostics and fault logging
    • Engine monitoring system
    • SAE J1939 broadcast (diagnostic and engine status)
  • Cooling System
    • Gear-driven centrifugal jacket water pump — RH
    • Integrated thermostat and housing
    • Engine oil cooler
    • Optional installed transmission oil cooler
  • Exhaust System
    • Exhaust manifold — dry
    • Two vertical exhaust outlets (front and rear)
  • Fuel System
    • MEUI
    • Fuel priming pump
    • Fuel transfer pump
    • Primary and secondary fuel filter — RH configured forremote mounting (installed RH on shipping plate)
  • Flywheels and Flywheel Housing
    • SAE No. 0 or SAE No. 1 flywheel iron housing
    • SAE No. 0 or SAE No. 1 flywheel
    • Optional transmission adapter
  • Lube System
    • Crankcase breather
    • Oil filter — RH standard, optional LH or remote mountservice
    • Oil level gauge — RH standard, optional LH or dualservice
    • Oil filler — RH standard, optional LH or dual service
    • Shallow oil pan, rear sump
  • Mounting System
    • Trunnion front support
    • Vertical and horizontal pads on rear flywheel housing
  • Protection System
    • 24V electronic
    • Engine overspeed with optional air shut-offs withindicators
    • Low engine oil pressure
    • Fuel filter restriction
    • Fuel temperature
    • High engine coolant temperature
    • Low engine coolant temperature
  • General
    • Vibration damper and optional guard
    • Lifting eyes
    • Optional customer wiring connector
    • Service tool connector
    • Paint — Cat yellow

Optional Equipment

Specs

Overview

Long Name:
C32 ACERT Land Mechanical Drilling Engine
Name:
C32 ACERT™
Brand:
Caterpillar
Status:
Current

Engine Specifications

Maximum Rating
1500 BHP / 1119 bkW
Emissions
U.S. EPA Non-road Tier 2
Displacement
1953 in³ / 32 l
Minimum Rating
800 BHP / 597 bkW
Bore
5.7 in / 145 mm
Stroke
6.4 in / 162 mm
Rated Speed
2100 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
5040 lb / 2286 kg
Rotation from Flywheel End
Counterclockwise
Oil Change Interval
250
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

Minimum Cooling System - Engine Only
14.5 gal (US) / 55 l

Dimensions

Length
75.5 in / 1918 mm
Width
85 in / 1473 mm
Height
52 in / 1321 mm

SEE HOW C32 ACERT™ COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.

Land Drilling Engines and Generator Sets
C32 ACERT™
C32 ACERT Land Drilling Engines
Brand
Caterpillar
Status
Current
Maximum Rating
1500 BHP / 1119 bkW
Emissions
U.S. EPA Non-road Tier 2
Displacement
1953 in³ / 32 l
Minimum Rating
800 BHP / 597 bkW
Bore
5.7 in / 145 mm
Stroke
6.4 in / 162 mm
Rated Speed
2100 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
5040 lb / 2286 kg
Rotation from Flywheel End
Counterclockwise
Oil Change Interval
250
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only
14.5 gal (US) / 55 l
Length
75.5 in / 1918 mm
Width
85 in / 1473 mm
Height
52 in / 1321 mm
Selected Model
Land Drilling Engines and Generator Sets
C32 ACERT™
C32 ACERT™ Tier 4 Final Petroleum Engine Well Servicing Engines
Brand
Caterpillar
Status
Current
Maximum Rating
1125 BHP / 839 bkW
Emissions
U.S. EPA Non-road Tier 4 Final
Displacement
1958 in³ / 32.1 l
Minimum Rating
1125 BHP / 839 bkW
Bore
5.7 in / 145 mm
Stroke
6.4 in / 162 mm
Rated Speed
1800 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
6107 lb / 2770 kg
Rotation from Flywheel End
Counterclockwise
Oil Change Interval
250
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Minimum Cooling System - Engine Only
15.9 gal (US) / 60 l
Length
85 in / 2159 mm
Width
49 in / 1253 mm
Height
63 in / 1594 mm
More Details
Land Drilling Engines and Generator Sets
C27 ACERT™
C27 ACERT™ Tier 4 Final Petroleum Engine
Brand
Caterpillar
Status
Current
Maximum Rating
950 BHP / 708 bkW
Emissions
U.S. EPA Non-road Tier 4 Final
Displacement
1648 in³ / 27 l
Minimum Rating
800 BHP / 597 bkW
Bore
5.4 in / 137.7 mm
Stroke
6 in / 152.4 mm
Rated Speed
1800 r/min / 1800 r/min
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A4
Engine Weight - Net Dry
6151 lb / 2790 kg
Rotation from Flywheel End
Counterclockwise
Oil Change Interval
250
Flywheel and Flywheel Housing
SAE No. 0
Flywheel Teeth
136
Minimum Cooling System - Engine Only
15.9 gal (US) / 60 l
Length
85 in / 2159 mm
Width
49 in / 1253 mm
Height
63 in / 1594 mm
More Details