C32 Tier 4 / IMO III
Cat C32 Generator Set (US EPA Tier 4 / IMO III)
Cat C32 Generator Set (US EPA Tier 4 / IMO III)
DESCRIPTION
Cat C32 Generator Set (US EPA Tier 4 / IMO III)Emissions
Utilizes SCR Technology to enable U.S. EPA Tier 4 Final and IMO III emission regulations compliance while lowering operational costs
Control Strategy
Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs ; Extends emissions useful life ; Ensures compliance ; Flexible to urea quality
Fuel System
Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology
Power Reserve
Industry leading power reserve
Certifications
Wide range of available Marine Society certifications
Warranty
Industry-leading warranty coverage for factory packaged components
Service
Global dealer network for service in any location
- Standard Equipment
- Optional Equipment
- Specs
- Docs
Standard Equipment
- AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
- CONTROL SYSTEM
- 24V control system
- COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
- FUEL SYSTEM
- Duplex fuel filters with hybrid fuel lines
- Primary fuel filter with water separator installed on base frame
- GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
- LUBE SYSTEM
- Oil fill, simplex filter and dipstick
- MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
- GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment
- ALARM AND PROTECTION
- MGCP III B control panel with Cat® Alarm and Protection System
- IP44 generator protection
- EXHAUST SYSTEM
- Muffler
- Water-in-fuel and exhaust temperature sensors
- SOLAS approved spray shielding
- CHARGING SYSTEM
- Charging alternator
- FUEL SYSTEM
- Manual or electric fuel priming pump
- Fuel cooler
- LUBE SYSTEM
- Duplex oil filters
- STARTING SYSTEM
- Starting motors – air, electric or redundant
Specs
Overview
Long Name:
Cat C32 Generator Set (US EPA Tier 4 / IMO III)
Name:
C32 Tier 4 / IMO III
Brand:
Caterpillar
Status:
Current
Generator Set Specifications
Minimum Rating
282 ekW
Maximum Rating
940 ekW
Frequency
60hz
Engine Specifications
Rated Engine Speed
1800 rpm
Configuration
Vee-12, 4-stroke-Cycle-Diesel
Aspiration
Turbocharged-aftercooled aspiration
Bore
5.71 in / 145 mm
Stroke
6.38 in / 162 mm
Displacement
1959 in³ / 32.1 l
Governor
Electronic (A5 ECM)
Emissions
U.S. EPA Tier 4 Final certified / IMO III emissions certified (SCR required)
Generator Set Dimensions
Length
167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width
59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height
70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Engine Dry Weight
15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
Clean Emissions Module (CEM) - Dimensions
6 Brick Z-Flow - Length
147.7 in / 3751 mm
Dosing Cabinet - Weight
209 lb / 95 kg
6 Brick Z-Flow - Weight
1246 lb / 565 kg
6 Brick U-Flow - Weight
1235 lb / 560 kg
Dosing Cabinet - Height
22.8 in / 579 mm
6 Brick U-Flow - Width
56.9 in / 1445 mm
6 Brick U-Flow - Length
85 in / 2159 mm
Dosing Cabinet - Width
18.8 in / 477 mm
6 Brick Z-Flow - Width
43.5 in / 1106 mm
6 Brick U-Flow - Height
23.5 in / 597 mm
Engine Specifications
Generator
SR5 - Form Wound
Clean Emissions Module (CEM) - Dimensions
Dosing Cabinet - Length
37.4 in / 949 mm
Engine Specifications
Cooling
Heat exchanger, keel or radiator cooled
Oil Change Interval
750 hrs
Clean Emissions Module (CEM) - Dimensions
6 Brick Z-Flow - Height
23.5 in / 597 mm
Engine Specifications
Refill Capacity
Lube Oil System w/ oil filter change: 146 L (38.5 gal)