H160 GC S
H160 GC S Hammer
DESCRIPTION
Cat® Hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC S Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.Reliable and Durable Design
- Cat® Hammers use up to 25 percent less fuel and are up to 27 percent more efficient.
- The standard silencing feature, indicated by the 'S' in the nomenclature, protects your operator and everyone near the jobsite.
- It also allows you to work on jobsites where noise is regulated.
- The power cell is protected by the fully enclosed housing.
- The housing also prevents dust and debris from entering the bushing.
- Enjoy fast service times and lower owning and operating costs with the simplified design.
- Choose between top and side mount options to match your application.
- Achieve consistent power and production over time with the gas fired design.
- Cat Hammers are designed to work with our machines as a total solution and provide seamless hydraulic connectivity for maximum performance.
- The buffering system reduces vibration to the machine, improves noise suppression, and improved hammer durability.
Easy to Maintain
- Achieve up to 18 percent lower maintenance costs with Cat® Hammers.
- Easy and quick access to maintenance areas ensures the hammer always operates at its peak.
- Spend more time working and less time on service.
- Greasing can be performed quickly from one standing-height grease point.
- Service the lower bushing in the field using simple hand tools.
- Verify the gas charge of the hammer without removing it from your machine.
- With the standard auto-lube system, your hammer is greased while it runs - saving you time and protecting your investment.
Easy to Operate
- Protect against blank firing with automatic shut off.
- This feature helps prevent damage to your machine and premature damage to your hammer by detecting when the hammer is not in contact with material.
- Operator feel, and control is improved with an interlocking quad wear system which guides and supports the front head.
- Select between high blow frequency and maximum power to get the performance you need to suit your application.
- Easily adjust the piston stroke between long and short stroke positions to match application requirements.
You Are Supported
- Go where the job takes you. The Cat® Dealer Network is there to help when you need it.
- Rely on Caterpillar for complete system support. Receive parts, service, and technical assistance for your machine, hammer, and hydraulics from a single source.
- Specs
- Docs
Specs
Overview
Long Name:
H160 GC S Hammer
Name:
H160 GC S
Brand:
Cat
Status:
Current
Impact Energy Class
7500 ft-lb / 10170 J
Blows per Minute
200-450
Maximum Operating Weight
5471.4 lb / 2487 kg
Minimum Operating Weight
6810 lb / 3090 kg
Maximum Carrier Weight
99200 lb / 45 t
Minimum Carrier Weight
72700 lb / 33 t
Tool Shaft Diameter
4.64 in / 118 mm
Maximum Operating Pressure
2610 psi / 18000 kPa
Minimum Operating Pressure
2320 psi / 15985 kPa
Rated Flow - Maximum
68 gal/min / 260 l/min
Rated Flow - Minimum
50 gal/min / 190 l/min
SEE HOW H160 GC S COMPARES AGAINST FREQUENTLY COMPARED PRODUCTS.
GC Hammers
H160 GC S
- Brand
- Cat
- Status
- Current
- Impact Energy Class
- 7500 ft-lb / 10170 J
- Blows per Minute
- 200-450
- Maximum Operating Weight
- 5471.4 lb / 2487 kg
- Minimum Operating Weight
- 6810 lb / 3090 kg
- Maximum Carrier Weight
- 99200 lb / 45 t
- Minimum Carrier Weight
- 72700 lb / 33 t
- Tool Shaft Diameter
- 4.64 in / 118 mm
- Maximum Operating Pressure
- 2610 psi / 18000 kPa
- Minimum Operating Pressure
- 2320 psi / 15985 kPa
- Rated Flow - Maximum
- 68 gal/min / 260 l/min
- Rated Flow - Minimum
- 50 gal/min / 190 l/min
Selected Model
GC Hammers
H130 GC S
- Brand
- Caterpillar
- Status
- Current
- Impact Energy Class
- 4425 ft-lb / 6000 J
- Blows per Minute
- 350-700
- Maximum Operating Weight
- 5471.4 lb / 2487 kg
- Minimum Operating Weight
- 5392 lb / 2451 kg
- Maximum Carrier Weight
- 70547 lb / 32 t
- Minimum Carrier Weight
- 55115 lb / 25 t
- Tool Shaft Diameter
- -5.91 in / 150 mm
- Maximum Operating Pressure
- 2610 psi / 18000 kPa
- Minimum Operating Pressure
- 2320 psi / 16000 kPa
- Rated Flow - Maximum
- 51 gal/min / 191 l/min
- Rated Flow - Minimum
- 43 gal/min / 161 l/min
GC Hammers
H180 GC S
- Brand
- Cat
- Status
- Current
- Impact Energy Class
- 10750 ft-lb / 14578 J
- Blows per Minute
- 200-400
- Maximum Operating Weight
- 5471.4 lb / 2487 kg
- Minimum Operating Weight
- 6810 lb / 3090 kg
- Maximum Carrier Weight
- 121200 lb / 55 t
- Minimum Carrier Weight
- 88100 lb / 40 t
- Tool Shaft Diameter
- 5.9 in / 150 mm
- Maximum Operating Pressure
- 2610 psi / 18000 kPa
- Minimum Operating Pressure
- 2320 psi / 15985 kPa
- Rated Flow - Maximum
- 79 gal/min / 300 l/min
- Rated Flow - Minimum
- 66 gal/min / 250 l/min