New | Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

Generator Set Specifications
Minimum Rating219 ekW
Maximum Rating940 ekW
Frequency60hz
Engine Specifications
Rated Engine Speed1800 rpm
ConfigurationVee-12, 4-stroke-Cycle-Diesel
AspirationTurbocharged-aftercooled aspiration
Bore5.71 in
Stroke6.38 in
Displacement1959 in³
GovernorElectronic (A4 ECM)
EmissionsU.S. EPA Tier 3 / IMO II emissions certified
GeneratorSR5 - Form Wound
Refill CapacityLube Oil System w/ oil filter change: 146 L (38.5 gal)
CoolingHeat exchanger, keel or radiator cooled
Oil Change Interval750 hrs
Generator Set Dimensions
Length167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)

Separate-Circuit Aftercooling – No Sea Water In Aftercooler

Reliable Electronic Controlled Unit Injector Fuel System. Enhanced Control Of Fuel Injection Optimized Through Crank Timing And A4 Ecm Technology. Advanced Combustion Technology To Optimize Fuel Consumption And Meet Emissions Without Aftertreatment.

Industry Leading Power Reserve

Wide Range Of Available Marine Society Certifications

Industry-Leading Warranty Coverage For Factory Packaged Components

Global Dealer Network For Service In Any Location

Standard Equipment

AIR INLET SYSTEM
  • Separate circuit aftercooled (SCAC)
CONTROL SYSTEM
  • 24V control system
COOLING SYSTEM
  • Heat exchanger, keel or radiator cooled
  • Watercooled exhaust manifold and turbocharger
  • Hard seawater lines – no flexible hoses
  • Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
  • Duplex fuel filters with hybrid fuel lines
  • Fuel transfer and priming pump
GENERATORS AND GENERATOR ATTACHMENTS
  • IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
LUBE SYSTEM
  • Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
  • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
  • Right or left hand service sides
  • Customer wiring and service tool connector

Optional Equipment

AIR INLET SYSTEM
  • Closed crankcase ventilation
ALARM AND PROTECTION
  • MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
  • IP44 generator protection
EXHAUST SYSTEM
  • Muffler
  • SOLAS approved spray shielding
CHARGING SYSTEM
  • Charging alternator
CONTROL SYSTEM
  • EMCP 4.2 control panel
FUEL SYSTEM
  • Installed primary fuel filter with water separator and manual or electric priming pump
  • Fuel cooler
LUBE SYSTEM
  • Duplex oil filters
STARTING SYSTEM
  • Starting motors – air, electric or dual

listofrelationships

original

Other Models in this Category

Select Marine Power System Type


Hawthorne Power Systems Logo

Request a Quote

Why Cat is Better. Machine Comparison

"
With only a few days notice, we were able to get the emergency system working properly. Hawthorne Cat provided great leadership and excellent field support.
Mark Cripe
Helix Electric
"

San Diego - Power
Kyle Farmer
Engine Business Manager
858.376.6821 office
760.715.9565 mobile
kfarmer@hawthornecat.com

Tim Roberts
Product Support
General Manager
858.376.6820 office
858.583.8460 mobile
troberts@hawthornecat.com

Mark Reza
Used Engine Sales Manager
858.376.6840 office
858.688.0076 mobile
mreza@hawthornecat.com

Phillip J. Smith (PJ)
Field Service Manager
858.376.6874 office
858.688.0134 mobile
psmith@hawthornecat.com

Hawaii – Power
Cliff Yuen
Director of Sales & Rentals
808.676.0322 office
808.349.7767 mobile
cyuen@hawthornecat.com

Guam – Power
Myver Hecita
Power Systems Rental &
Sales Representative
671.649.4241 office
671.898.2740 mobile
mhecita@hawthornecat.com