New | CCS7 Smooth Drum Vibratory Combination Compactor

The CCS7 is a 7 metric ton vibratory combination compactor that combines the smooth front drum of a soil compactor, with smooth rear tires similar to a pneumatic compactor. In addition, the water spray system utilized on Cat® Asphalt Compactors keeps the drum and tires wet for excellent performance on asphalt. It offers outstanding operator comfort while continuing the legacy of durability, reliability and ease-of-service that contractors worldwide have come to expect from Caterpillar machines.

Weights
Operating Weight with Cab16907.0 lb
Weight at Drum with Cab9621 lb
Operating Weight with ROPS/FOPS Canopy16320.0 lb
Weight at Drum with ROPS/FOPS Canopy9325.0 lb
Operating Specifications
Standard Compaction Width67 in
Ground Clearance16 in
Static Linear Load, with Cab145 lb/in
Static Linear Load, with ROPS/FOPS141 lb/in
Travel Speed - Maximum7 mph
Turning Radius Inside Drum Edge10 ft
Engine
Gross Power100.6 hp
Engine ModelCat C3.4B with ACERT
Dimensions
Drum Diameter48 in
Drum Width84.0 in
Height with ROPS/FOPS or Cab9.2 ft
Overall Length16.8 ft
Overall Width5.9 ft
Wheelbase8.5 ft
Service Refill Capacities
Fuel Tank Capacity40 gal
Water Spray Tank104 gal
Wheel Spray Tank4 gal
Vibratory System
Centrifugal Force - Maximum28101 lb
Centrifugal Force - Minimum11240 lb
Nominal Amplitude - High0.036 in
Nominal Amplitude - Low0.014 in
Vibratory Frequency - Standard2520 vpm

Exceptional visibility and control with smooth steering, touchpad machine functions, and LCD display, help keep operators engaged and more productive.

Finger Tip Control

Touch pad machine functions enable the operator to fine tune engine speed control, travel speed, and water spray intervals for efficient operation.

Intuitive LCD Display

Easily monitor machine operating conditions including; travel speed, vibrations per minute, fuel level, operating temperature, and machine diagnostics. The display is backlit for easy viewing in various lighting conditions.

This machine is equipped with a powerful Cat C3.4B engine that meets U.S. EPA Tier 4 Final and EU Stage IV emissions standards. Eco-mode, automatic engine speed control, and the auto-vibe features help provide reliable control.

Cat C3.4B Engine with ACERT™ Technology

The Cat C3.4B engine with ACERT™ technology offers enhanced efficiency, better serviceability, ample power, and low sound levels. It provides 75 kW (100 hp) of power and utilizes the building blocks of ACERT technology in order to meet emission standards. This innovative combination yields cleaner combustion and delivers steady power in all operating conditions with optimal fuel efficiency.

Eco-mode

Eco-mode helps to economize the use of fuel. When the machine idles for a predetermined amount of time, Eco-mode is engaged and the engine rpm is lowered. When the propel lever is engaged, higher engine speeds resume. For certain applications, Eco-mode can be engaged to operate the engine at lower rpm than normal. The lower engine speed results in less fuel burn. Eco-mode can also be programmed to shut down the engine after a user-defined amount of time.

Automatic Speed Control

Automatic Speed Control is a feature that allows the operator to select a maximum working speed. Once selected, the speed can consistently be reached by engaging the propel lever to the full stroke. Consistent speed contributes to compaction quality by making it easier to maintain compaction uniformity.

The vibratory system and the optional temperature sensors help deliver higher performance and efficiency.

Simple Operation

A single switch enables the operator to choose between two amplitudes for easy thin lift or thick lift operation. The thick lift setting delivers an amplitude of 0.92 mm (0.036 in), while the thin lift setting delivers 0.37 mm (0.014 in).

Optional Temperature Sensors

Optional Infra-red sensors enable operators to easily monitor surface temperatures to help determine when to begin and when to end the compaction process. The upper temperature limit for compaction is about 160 degrees C (320 degrees F), while the lower limit is about 90 degrees C (190 degrees F).

Automatic Vibratory Control

An auto-vibe function is tailored to activate or deactivate the vibratory system based on the propel lever position in order to prevent over compaction when making starts and stops.

The industry-leading water spray system features a single fill point, dual water pumps, dual spray bars, triple filtration, intermittent operation, and high capacity for optimal performance and longer re-fill intervals.

Capacity and Convenience

The water tank capacity for the drum is 400 L (88 gal), while the wheel spray tank capacity is 18 L (4 gal). Dual pumps alternate with the direction of travel in order to optimize the service life of each pump.

High Flow Design

Dual spray bars and evenly spaced nozzles help ensure that the drum stays wet, even in the harshest conditions.

Reliable Performance

Triple filtration with filters located in the tank fill port, before the water pump and in the spray nozzles help provide reliable performance.

Best Life-time Value with Eco-mode, oil-bath lubrication of the eccentric weights, and long service intervals, help extend operation and minimize life-time operating costs.

Long Service Intervals

Long service intervals contribute to more productivity and lower owning and operating costs. The vibratory system scheduled oil change interval is 3 years/3,000 hours. The hydraulic oil service interval is 3,000 hours. Engine oil service is every 500 hours.

Tilting Cooling System

The cooling system tilts for easy cleaning. Normal cleaning ensures that the cooling systems protects the engine to full capacity.

Optional Equipment

Additional Rear-View Mirrors
Beacon, Rotating
Bio-oil Factory Fill
Cab Internal Roll-Down Sun Screen
Infra-Red Temperature Guage
ROPS/FOPS Cab with Climate Control
Sun Visor
Water Distribution Mats (Cocoa, Rubber)

listofrelationships

small_image

small_image

small_image

Other Models in this Category

Select Product Category