New | 930M Wheel Loader

The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.

Engine
Engine ModelCat® C7.1 ACERT™
Maximum Rated Gross Power - ISO 14396164 HP
Maximum Rated Gross Power - ISO 14396 (DIN)166 HP
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)166 HP
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)164 HP
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800 r/min
Rated Net Power157 HP
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)160 HP
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)157 HP
Maximum Gross Power164 HP
Bore4 in
Stroke5 in
Displacement427 in³
EmissionsEngine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)592 lb/ft
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)592 lb/ft
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)572 lb/ft
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)572 lb/ft
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)566 lb/ft
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)566 lb/ft
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)162 HP
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)160 HP
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600 r/min
Note (1)* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4)Spark arrestor performance as standard – Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)156 HP
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)158 HP
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)154 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)162 HP
Buckets
Bucket Capacities2.1-5.0 m3 (2.7-6.5 yd3)
Weights
Operating Weight30879 lb
Cab
ROPSISO 3471: 2008
FOPSISO 3449: 2005 LEVEL II
Note (1)Declared sound levels per ISO 6396:2008* while in Performance Power Mode: – Standard cab: 68 ±3 dB(A) and Deluxe cab
Note (2)* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Air Conditioning System
Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.7/2.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.1/5.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.3/10.1 seconds
Lift Cylinder, Double Acting - Bore Diameter4.7 in
Lift Cylinder, Double Acting - Rod Diameter2.6 in
Lift Cylinder, Double Acting - Stroke28.7 in
Maximum Flow - Implement Pump50 gal/min
Maximum Flow - Implement Pump - 3rd Function*50 gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*42 gal/min
Maximum Working Pressure - Implement Pump3626 psi
Note (1)* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note (2)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (3)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Relief Pressure - Tilt Cylinder4061 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure3626 psi
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure4061 psi
Tilt Cylinder, Double Acting - Bore Diameter5.9 in
Tilt Cylinder, Double Acting - Rod Diameter3.5 in
Tilt Cylinder, Double Acting - Stroke21.9 in
Operating Specifications
Full Turn Tip Load18670 lb
Power Train
Brakes - ParkingSpring applied hydraulically released
Brakes - ServiceInboard wet disc
Front AxleFixed
Front Axle - Traction Aid - StandardLocking differential
Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (2)Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Rear AxleOscillating
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder± 7 degrees
Rear Axle - Traction Aid - OptionalLimited slip differential
Service Refill Capacities
Cooling System7.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank5 gal (US)
Engine Crankcase5.3 gal (US)
Front Axles6.9 gal (US)
Fuel Tank51.5 gal (US)
Hydraulic System - Including Tank43.6 gal (US)
Hydraulic Tank23.8 gal (US)
Rear Axles6.6 gal (US)
Transmission - Gear Box2.2 gal (US)
Steering
Maximum Flow - Steering Pump34 gal/min
Maximum Steering Torque - 0° (Straight Machine)37155 lb/ft
Maximum Steering Torque - 40° (Full Turn)27747 lb/ft
Maximum Working Pressure - Steering Pump3500 psi
Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8 s
Steering Cylinder, Double Acting - Bore Diameter2.8 in
Steering Cylinder, Double Acting - Rod Diameter1.6 in
Steering Cylinder, Double Acting - Stroke17.2 in
Transmission
Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 28 mile/h
Forward and Reverse - Range 317 mile/h
Forward and Reverse - Range 425 mile/h
Note* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
  • Configured For Success
  • Work Made Easy
  • Service
  • Enjoy All Day Comfort
  • Efficiently Powerful
  • Customize Your Experience
  • Customer Support

Standard Equipment

POWER TRAIN
  • Axle seal guards
  • Auto idle shut down feature
  • Cat C7.1 ACERT engine
    – Power Modes (Standard and Performance)
    – Power by Range (High Power in Range 4)
    – Turbocharged and aftercooled
    – Diesel particulate filter (Fit for Life)
  • Coolant protection to –34° C (–29° F)
  • Differential lock in front axle
  • Dry type air cleaner
  • Enclosed wet disc full hydraulic brakes
  • Fuel priming pump, automatic
  • Fuel water separator
  • Hydraulically driven demand cooling fan
  • Intelligent hydrostatic transmission
    – Power train modes
    – Directional shift aggressiveness
    – Rimpull control, adjust wheel torque
    – Creeper control, adjust ground speed
  • Lubed for life driveshafts
  • Parking brake, electric
  • Wide spaced 6 fins per inch cooling package
  • S·O·SSM sampling ports
  • Throttle lock and maximum speed limiter
HYDRAULICS
  • Automatic lift, lower and tilt kickouts
  • Bucket and Fork Modes, adjustable in-cab
  • Cylinder damping at kickout and end stops
  • Fine Mode control in Fork Mode
  • Hydraulic Response setting
  • Load sensing hydraulics and steering
  • Seat-mounted hydraulic joystick controls
ELECTRICAL
  • Alternator, 115-amp, heavy duty
  • 12V power supply in cab (2)
  • Batteries, 1,000 CCA (2) 24 volt system
  • Back-up alarm
  • Emergency shutdown switch
  • Heavy duty gear reduction starter
  • Product Link PRO with subscription
  • Remote jump start post
  • Resettable critical function breakers
OPERATOR ENVIRONMENT
  • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
  • Automatic temperature control
  • Cab, enclosed and pressurized
  • Cup holders
  • External heated mirrors with lower parabolic
  • Ground level cab door release
  • Gauges
    – Digital hour, odometer, tachometer, ground speed and direction indicator
    – Engine coolant temperature gauge
    – Fuel and Diesel Exhaust Fluid level
    – Hydraulic oil temperature gauge
  • Hydraulic control lockout
  • Interior cab lighting, door and dome
  • Interior rearview mirrors (2)
  • Lunch box storage
  • Operator warning system indicators
  • Radio ready speakers
  • Rear window defrost, electric
  • Seat-mounted controls, adjustable
  • Sliding glass on the side windows
  • Column mounted multi function control – lights, wipers, turn signal
  • Suspension seat, fabric
  • Tilt and telescopic steering wheel
  • Wet arm wiper/washer, front and rear
OTHER STANDARD EQUIPMENT
  • Large-access enclosure doors
  • Parallel lift loader linkage
  • Recovery hitch with pin
  • Remote mounted lubrication points
  • Lockable compartments and enclosures

Optional Equipment

OPTIONAL EQUIPMENT
  • Antifreeze/coolant, extended-life
  • Auto lube, integrated in secondary display
  • Auxiliary flow, third and fourth function
  • Axles, differential, limited slip, rear
  • Beacon light, strobe
  • Cab, deluxe (standard in Europe):
    – Automatic blower control
    – Electrically adjustable heated mirrors (2)
    – LED interior lighting
    – Touchscreen secondary display
  • Ride control adjustable speed activation
  • Preventative maintenance reminders
  • Integrated help function (26 languages)
  • Sunscreen, front and rear
  • Camera, rearview (standard in Europe)
  • Cold start package:
    – Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
  • Counterweight, (heavy and logger)
  • Coupler, (Fusion and ISO 23727)
  • Debris packages (low, medium, high)
  • Fenders (extended cover and full coverage)
  • Guards
    – Power train, (lower, side, driveshaft and crankcase)
    – Windshield and lights
    – Cylinders, tilt and steering
    – Rear radiator, heavy duty
  • Linkage, high lift
  • Lights, auxiliary, halogen or LED with engine compartment lights
  • Payload Technology
    – Cat Production Measurement (CPM)
    – CPM Printer
  • Rear Object Detection
  • Radio packages:
    – Radio ready with Bluetooth
    – Radio, AM/FM with Bluetooth and clock
    – Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock
  • Seats:
    – Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
    – Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.
  • Steering:
    – Dual mode and Secondary
  • Tires:
    – Bias ply, 17.5, 20.5-25, Skidder
    – Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25
    – Solid tires, 620/65, 750/65 Agriculture
  • Tire Pressure Monitoring (TPM)
  • Toolbox
  • Work tools

listofrelationships

original

original

original

original

original

original

original

original

original

original

original

Other Models in this Category

Select Product Category